| MichiganRS | 12-15-2000 03:35 PM |
Best Interiors?Pics?
Anyone have some great interior shotsof subarus?Orsome rally interior shots!
Thanks,
John
Thanks,
John
| ChAi | 12-15-2000 06:06 PM |
how about this one?
[img]http://216.242.153.40/MembersList/UserPics\469\in1.jpg[/img]
[img]http://216.242.153.40/MembersList/UserPics\469\in1.jpg[/img]
| MichiganRS | 12-15-2000 06:38 PM |
That looks great!
IS that aluminum paint?
How does it hold up?
Thanks,
John
IS that aluminum paint?
How does it hold up?
Thanks,
John
| Aspen | 12-15-2000 08:22 PM |
Too bad you can't use the other half of that nice tach. hehe.
Do you have NOS or are you just posing?
Looks good though.
Do you have NOS or are you just posing?
Looks good though.
| VALENTA | 12-15-2000 08:39 PM |
Here are mine:
[img]http://www.montreal-subaru-club.com/janv/wrx%20steering%20(mid).jpg[/img]
[img]http://www.montreal-subaru-club.com/janv/wrx%20seat%20(mid).jpg[/img]
It's Aluminum paint and the guage is real aluminum.
As for the rest, it speaks for itself! [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Cheers
Jan
[img]http://www.montreal-subaru-club.com/janv/wrx%20steering%20(mid).jpg[/img]
[img]http://www.montreal-subaru-club.com/janv/wrx%20seat%20(mid).jpg[/img]
It's Aluminum paint and the guage is real aluminum.
As for the rest, it speaks for itself! [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Cheers
Jan
| Bobalouy | 12-15-2000 09:21 PM |
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34446376[/img]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34446378[/img]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34564455[/img]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34564459[/img]
Anthony C.
[This message has been edited by Bobalouy (edited December 15, 2000).]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34446378[/img]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34564455[/img]
[img]http://albums.photopoint.com/j/View?u=1373839&a=10247439&p=34564459[/img]
Anthony C.
[This message has been edited by Bobalouy (edited December 15, 2000).]
| JC | 12-15-2000 10:26 PM |
Sanders has a pretty crazy interior.
| strider3700 | 12-16-2000 03:13 AM |
Bobalouy is that a fire extinguisher tucked under the driver seat I see in the pictures? If so how did you mount it and how secure is it there?
| prezios | 12-16-2000 03:56 AM |
Here ya go!
[img]http://albums.photopoint.com/j/View?u=1153942&a=8534097&p=30716398&Sequence=0&res=high[/img]
Not an RS but close enough. [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
[img]http://albums.photopoint.com/j/View?u=1153942&a=8534097&p=30716398&Sequence=0&res=high[/img]
Not an RS but close enough. [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| Leonardo | 12-16-2000 07:10 AM |
Can someone spill the beans and tell how they did it? ChAi, VALENTA ?!
I want to do this too but would like to know the steps.
Leo
I want to do this too but would like to know the steps.
Leo
| Siper2 | 12-16-2000 07:49 AM |
VALENTA's wins, if you ask me. [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
-S2-
-S2-
| MichiganRS | 12-16-2000 01:08 PM |
They are look good to me.After seeing babs car I cant waitto get me roof scoop installed. Does the roof scoops come in different sizes?Cause I bought one from primitive and it looks huge well bigger than thatone?
Thanks,
John
Thanks,
John
| Basshead | 12-16-2000 04:06 PM |
chai has a stage 2 minnam turbo kit...lol ya he's posing it, NOT!!
[This message has been edited by Basshead (edited December 16, 2000).]
[This message has been edited by Basshead (edited December 16, 2000).]
| Mike Moffa | 12-16-2000 05:28 PM |
Here are my pictures [img]http://www.i-club.com/ubb-files/smile.gif[/img]
[img]http://pages.infinit.net/subarurs/my25rs/mikes_interior.jpg[/img]
[img]http://pages.infinit.net/subarurs/my25rs/mikesinterior1.jpg[/img]
[img]http://www.montreal-subaru-club.com/img/consolemed.jpg[/img]
[img]http://www.montreal-subaru-club.com/event/carfever_august20/images/mikesseats1.jpg[/img]
Hope you will like them.. hehe
later
Mike M
[This message has been edited by Mike Moffa (edited December 16, 2000).]
[img]http://pages.infinit.net/subarurs/my25rs/mikes_interior.jpg[/img]
[img]http://pages.infinit.net/subarurs/my25rs/mikesinterior1.jpg[/img]
[img]http://www.montreal-subaru-club.com/img/consolemed.jpg[/img]
[img]http://www.montreal-subaru-club.com/event/carfever_august20/images/mikesseats1.jpg[/img]
Hope you will like them.. hehe
later
Mike M
[This message has been edited by Mike Moffa (edited December 16, 2000).]
| Eric SS | 12-16-2000 05:33 PM |
Nice interiors guys! However, I think the Tach in the first pic is a little much but to each there own. I love the S-AFC pod in the middle!
Eric
Eric
| m750 | 12-16-2000 07:30 PM |
prezios-
what s-afc mnt is that?
AO
what s-afc mnt is that?
AO
| Eric SS | 12-16-2000 07:33 PM |
Looks like the Kartboy mount retrofitted into the Radio Bezel...
Eric
Eric
| JC | 12-16-2000 07:53 PM |
I'm surprised this one hasn't been posted yet. This is IMHO, the best Subaru interior...
[img]http://202.217.201.209/motorshow/dress_up_car/img/electra/ele_b7.jpg[/img]
This is the interior from the Electra. As nqwan said.
[This message has been edited by JC (edited December 17, 2000).]
[img]http://202.217.201.209/motorshow/dress_up_car/img/electra/ele_b7.jpg[/img]
This is the interior from the Electra. As nqwan said.
[This message has been edited by JC (edited December 17, 2000).]
| Eric SS | 12-16-2000 09:04 PM |
looks like someone reversed the negative in that picture [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Those are my favorite seats though...
Eric
Those are my favorite seats though...
Eric
| nqwan | 12-16-2000 10:31 PM |
iirc, dats the interior of the neo electra impreza...
| Turk | 12-17-2000 02:21 PM |
JC - What kind of seats are those? And don't say just STi [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Turk
Turk
| JC | 12-17-2000 02:25 PM |
STi
| Turk | 12-17-2000 06:47 PM |
You suck! [img]http://www.i-club.com/ubb-files/wink.gif[/img]
Turk
Turk
| JC | 12-17-2000 08:11 PM |
You saw that I edited my post, right?
| Chav | 12-17-2000 08:23 PM |
ChAi did u move ur gauge pack to the din spot above the radio? The gauge pack is din sized?
-Chav
-Chav
| Turk | 12-17-2000 08:36 PM |
Ooops no sorry [img]http://www.i-club.com/ubb-files/smile.gif[/img] I see now, thanks [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Turk
Turk
| ChAi | 12-18-2000 12:00 AM |
yes, i did move my gauge pack to the din spot above the radio. it the same size is the radio.
| Leonardo | 12-18-2000 05:42 AM |
Is anybody going to post a how to? At least the materials used!
Please,
Leo
Please,
Leo
| FreaK | 12-18-2000 07:08 AM |
MIKE M,
Those seats are awesome!
Who makes them??? How much???
FreaK
Those seats are awesome!
Who makes them??? How much???
FreaK
| Subie Gal | 12-18-2000 07:12 AM |
[img]http://www.subiegal.com/images/pnwsec/Subie%20interior.jpg[/img]
[img]http://www.subiegal.com/images/pnwsec/Subie%20interior1.jpg[/img]
[img]http://www.subiegal.com/images/pnwsec/Subie%20interior2.jpg[/img]
j.
[url="http://www.subiegal.com"]www.subiegal.com[/url]
[This message has been edited by Subie Gal (edited December 18, 2000).]
[img]http://www.subiegal.com/images/pnwsec/Subie%20interior1.jpg[/img]
[img]http://www.subiegal.com/images/pnwsec/Subie%20interior2.jpg[/img]
j.
[url="http://www.subiegal.com"]www.subiegal.com[/url]
[This message has been edited by Subie Gal (edited December 18, 2000).]
| Scottie | 12-18-2000 08:25 AM |
Bees must love your car. Do you have to keep your windows closed?
| Subie Gal | 12-18-2000 10:23 AM |
[img]http://www.i-club.com/ubb-files/wink.gif[/img] every damn day!! [img]http://www.i-club.com/ubb-files/wink.gif[/img]
| SRI Performance | 12-18-2000 10:32 AM |
Subie Gal, we must love the same color, but i don't know how to post up a pic, so i'll e-mail to you!!!
chris
chris
| joostin420 | 12-18-2000 11:37 AM |
ChAi what type of paint is that, and how does it hold up? or is it some type of vinyl?
thanx,
justin
thanx,
justin
| cwhalgren | 12-18-2000 01:04 PM |
I saw some questions about Prezios' S-AFC install. Here is how I did mine, and I assume he did his the same.
[img]http://216.242.153.40/MembersList/UserPics/1668/SAFC.jpg[/img]
S-AFC dash mount:
Note: This involves some cutting of dash pieces and thus isn't easily reversible.
Overview:
The S-AFC is mounted under the radio using the black storage bin as your mount. The bin is notched about 1" to fit the S-AFC flush. The dash trim needs to be opened about 1/8" since the unit is slightly larger than DIN size. This is from memory, excuse any minor errors.
1. Remove the black storage bin from under the radio.
A. Uncap and unscrew the two screws under the armrest on the center console.
B. Remove each piece of the center console starting from the back and working your way forward. After the first two screw the rest is just held in by clips, but must be removed in order. Unclip various wires for mirrors and cigarette lighter along the way.
C. Unscrew the metal frame that holds the radio and bin in place (4 screws).
D. Unscrew the bin from that frame (2 screws). The screws in the radio may need to be loosened to get the locating pins of the bin out.
2. Cut the bin.
A. Measure the width of the AFC and transfer this measurement centered to the bin. Note that the sides are not perfectly strait, so your cut shouldn't be at 90 either.
B. Depth of cut = depth of the AFC – the thickness of the plastic trim pieces (will explain later) – relief of radio. Depending on if your using the stock radio or something else, you'll want the S-AFC to be flush with that, not necessarily the dash.
C. Drill a hole in the back for the wiring to come out.
3. Make up a pair of side trim pieces.
A. I used the black plasitc from inside an old CD case. Anything will do, but that was the right color and texture (and available to anyone)
B. They could either be the height of the S-AFC or the height of the current dash opening. I preferred to make it the height of the opening for a cleaner look.
4. Mount the AFC and side trim.
A. Double sided foam tape is sufficient. One piece along the top of the bin edge, another on the bottom. If your cuts in 2A were good, it should be very tight and the foam tape is only need to keep it from falling out forward.
B. Use some plastic model or crazy glue to hold these on. The bin has a fair amount of surface area on this front edge for gluing. Align these with the top edge of the AFC.
5. Trim the center dash surround.
A. You'll probably need to "open" this up by about 1/8". Try a test fit to get the exact height and mark where the left and right edges of the AFC fall (don't assume you had it centered before). A dremel works well here.
6. Reinstall the bin into the metal frame and put the dash trim pieces back in. All done!
Edit - fix picture
[This message has been edited by cwhalgren (edited December 18, 2000).]
[img]http://216.242.153.40/MembersList/UserPics/1668/SAFC.jpg[/img]
S-AFC dash mount:
Note: This involves some cutting of dash pieces and thus isn't easily reversible.
Overview:
The S-AFC is mounted under the radio using the black storage bin as your mount. The bin is notched about 1" to fit the S-AFC flush. The dash trim needs to be opened about 1/8" since the unit is slightly larger than DIN size. This is from memory, excuse any minor errors.
1. Remove the black storage bin from under the radio.
A. Uncap and unscrew the two screws under the armrest on the center console.
B. Remove each piece of the center console starting from the back and working your way forward. After the first two screw the rest is just held in by clips, but must be removed in order. Unclip various wires for mirrors and cigarette lighter along the way.
C. Unscrew the metal frame that holds the radio and bin in place (4 screws).
D. Unscrew the bin from that frame (2 screws). The screws in the radio may need to be loosened to get the locating pins of the bin out.
2. Cut the bin.
A. Measure the width of the AFC and transfer this measurement centered to the bin. Note that the sides are not perfectly strait, so your cut shouldn't be at 90 either.
B. Depth of cut = depth of the AFC – the thickness of the plastic trim pieces (will explain later) – relief of radio. Depending on if your using the stock radio or something else, you'll want the S-AFC to be flush with that, not necessarily the dash.
C. Drill a hole in the back for the wiring to come out.
3. Make up a pair of side trim pieces.
A. I used the black plasitc from inside an old CD case. Anything will do, but that was the right color and texture (and available to anyone)
B. They could either be the height of the S-AFC or the height of the current dash opening. I preferred to make it the height of the opening for a cleaner look.
4. Mount the AFC and side trim.
A. Double sided foam tape is sufficient. One piece along the top of the bin edge, another on the bottom. If your cuts in 2A were good, it should be very tight and the foam tape is only need to keep it from falling out forward.
B. Use some plastic model or crazy glue to hold these on. The bin has a fair amount of surface area on this front edge for gluing. Align these with the top edge of the AFC.
5. Trim the center dash surround.
A. You'll probably need to "open" this up by about 1/8". Try a test fit to get the exact height and mark where the left and right edges of the AFC fall (don't assume you had it centered before). A dremel works well here.
6. Reinstall the bin into the metal frame and put the dash trim pieces back in. All done!
Edit - fix picture
[This message has been edited by cwhalgren (edited December 18, 2000).]
| prezios | 12-18-2000 01:22 PM |
Thanks cwhalgren I must give you the credit. You did a great job on the install in your car. I just needed to do it for myself. You deserve the credit for this little mod!
| rjones | 12-18-2000 01:27 PM |
Hey Mike Moffa-
Is that a brake bias knob jutting out of your center console? Nitrous?
rj
Is that a brake bias knob jutting out of your center console? Nitrous?
rj
| chuckles | 12-18-2000 01:59 PM |
I am mad at everyone who put pics in here.
Now I have to paint my dash [img]http://www.i-club.com/ubb-files/frown.gif[/img]
[img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Now I have to paint my dash [img]http://www.i-club.com/ubb-files/frown.gif[/img]
[img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| Turk | 12-18-2000 03:15 PM |
Anyone have any recomandations for the brand name of spray paint? And what color should I use for BRP? The Rustoleum I'm using just isn't getting along with me.
Turk
Turk
| Subie Gal | 12-18-2000 03:58 PM |
I used vinyl on mine...
but i've seen some decent paint jobs as well...
3 yards of vinyl - from a sign shop - $10
apply and if you screw up... no biggie -
j.
[url="http://www.subiegal.com"]www.subiegal.com[/url]
but i've seen some decent paint jobs as well...
3 yards of vinyl - from a sign shop - $10
apply and if you screw up... no biggie -
j.
[url="http://www.subiegal.com"]www.subiegal.com[/url]
| wop | 12-18-2000 04:07 PM |
Mike Moffa-
what is that thing protruding from the ash tray?
-wop [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img] [img]http://cwm.ragesofsanity.com/s/scorchio/saevilw.gif[/img] [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img]
what is that thing protruding from the ash tray?
-wop [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img] [img]http://cwm.ragesofsanity.com/s/scorchio/saevilw.gif[/img] [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img]
| Mike Moffa | 12-18-2000 04:35 PM |
Freak :
Thanks man, those seat are.. hmm. Secret. hehe. a lot of people ask me that question. They are OBX seats.. I love them..
RJONES :
hehe, the control that you see that I can turn, its my boost controler for my boost.. so, like that I can set up my PSI directly from the inside.hehe [img]http://www.i-club.com/ubb-files/smile.gif[/img]
WOP :
Like I said, in the ashtray place, its my Boost controler (the valve) with the Apex ITC that take the rest of the place.
Later guy
Mike M
Thanks man, those seat are.. hmm. Secret. hehe. a lot of people ask me that question. They are OBX seats.. I love them..
RJONES :
hehe, the control that you see that I can turn, its my boost controler for my boost.. so, like that I can set up my PSI directly from the inside.hehe [img]http://www.i-club.com/ubb-files/smile.gif[/img]
WOP :
Like I said, in the ashtray place, its my Boost controler (the valve) with the Apex ITC that take the rest of the place.
Later guy
Mike M
| wop | 12-18-2000 04:38 PM |
nice [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
wop [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img] [img]http://cwm.ragesofsanity.com/s/scorchio/saevilw.gif[/img] [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img]
wop [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img] [img]http://cwm.ragesofsanity.com/s/scorchio/saevilw.gif[/img] [img]http://cwm.ragesofsanity.com/s/net/icon26.gif[/img]
| Dre2932 | 12-18-2000 09:30 PM |
I think the best one so far is SubieGal.. That interior kicks!! You go Girl!! [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| FreaK | 12-19-2000 07:00 AM |
Mike M,
Thanks for the info.
Your car looks tite!
FreaK
Thanks for the info.
Your car looks tite!
FreaK
Không có nhận xét nào:
Đăng nhận xét