| 02R6 | 06-27-2003 05:15 PM |
aftermarket wheel and cruise?
�
�
I'm interested in getting a smaller diameter, thicker aftermarket steering wheel (Sparco, Momo, Nardi, etc.). But I want to keep my cruise control.
Is it possible? Where did you re-mount the control? Pictures? Suggestions?
Is it possible? Where did you re-mount the control? Pictures? Suggestions?
| kenchan | 06-27-2003 05:49 PM |
yah, i think it is possible as there is only 4 wires going to the switch module. but without taking part the module i could not
tell if there is a memory module on a PCB or if its just a straight
solenoid controller.
i have an aftermarket steering wheel, but since i only
use my car for close range fun driving on the weekends, i dont use the cruise control and threfore took it off.
tell if there is a memory module on a PCB or if its just a straight
solenoid controller.
i have an aftermarket steering wheel, but since i only
use my car for close range fun driving on the weekends, i dont use the cruise control and threfore took it off.
| Subie Gal | 06-27-2003 06:58 PM |
i have my cruise mounted in it's stock location...
with my 350mm sparco steering wheel.
had the omp wheel hub machined to accept the cruise and horn.
i need to take pics... okay.. i 'll do that.. :)
Jamie
with my 350mm sparco steering wheel.
had the omp wheel hub machined to accept the cruise and horn.
i need to take pics... okay.. i 'll do that.. :)
Jamie
| 02R6 | 06-28-2003 09:02 AM |
Thanks for the replies. I would love to see that picture.
| sidewayz | 06-28-2003 01:11 PM |
How were you able to put the clock spring back in with the wheel hub??? On my Sparco hub and wheel, I can't use it.
| 02R6 | 06-30-2003 07:14 AM |
Any word on the pictures?
| Subie Gal | 06-30-2003 11:13 AM |
nope... been busy...
i'll get to it...
Jamie
i'll get to it...
Jamie
| 02R6 | 07-01-2003 07:44 AM |
No problem, just wondering. Thank you.
| 02R6 | 07-02-2003 01:14 PM |
There's nobody else who has an aftermarket steering wheel [I]and[/I] cruise control, or at least some thoughts on how to make it work?
| JDMpreza | 07-02-2003 06:35 PM |
what about your airbag? :o
| sidewayz | 07-02-2003 10:35 PM |
there is no way that you can use an aftermarket wheel WITH cruise...there is no place to a. mount the cruise stalk. and b. mount the clock spring that controls it all. PLUS. with an aftermarket wheel, you loose the horn, air bag, and turn signal release function. I don't know what subiegal is talking about.
| kenchan | 07-03-2003 02:06 AM |
you need to do some research...
[QUOTE][i]Originally posted by sidewayz [/i]
[B]there is no way that you can use an aftermarket wheel WITH cruise...there is no place to a. mount the cruise stalk. and b. mount the clock spring that controls it all. PLUS. with an aftermarket wheel, you loose the horn, air bag, and turn signal release function. I don't know what subiegal is talking about. [/B][/QUOTE
[QUOTE][i]Originally posted by sidewayz [/i]
[B]there is no way that you can use an aftermarket wheel WITH cruise...there is no place to a. mount the cruise stalk. and b. mount the clock spring that controls it all. PLUS. with an aftermarket wheel, you loose the horn, air bag, and turn signal release function. I don't know what subiegal is talking about. [/B][/QUOTE
| Subie Gal | 07-03-2003 11:30 AM |
[QUOTE][i]Originally posted by sidewayz [/i]
[B]there is no way that you can use an aftermarket wheel WITH cruise...there is no place to a. mount the cruise stalk. and b. mount the clock spring that controls it all. PLUS. with an aftermarket wheel, you loose the horn, air bag, and turn signal release function. I don't know what subiegal is talking about. [/B][/QUOTE]
fine fine i'll take photos.. :p
because i do indeed have the cruise stalk mounted in it's OEM location utilizing the aftermarket hub :p and my horn works just fine... oh and... :D so do my turnsignals....
ahhh but.... there is no airbag...
[i]that was the point of putting the aftermarket wheel in in the first place... [/i] duuuuuh.......
i'll get detailed photos, but i'm really really busy this weekend.
i'll start a thread when they're up.
cheers
Jamie
[url]www.subiegalracing.com[/url]
[B]there is no way that you can use an aftermarket wheel WITH cruise...there is no place to a. mount the cruise stalk. and b. mount the clock spring that controls it all. PLUS. with an aftermarket wheel, you loose the horn, air bag, and turn signal release function. I don't know what subiegal is talking about. [/B][/QUOTE]
fine fine i'll take photos.. :p
because i do indeed have the cruise stalk mounted in it's OEM location utilizing the aftermarket hub :p and my horn works just fine... oh and... :D so do my turnsignals....
ahhh but.... there is no airbag...
[i]that was the point of putting the aftermarket wheel in in the first place... [/i] duuuuuh.......
i'll get detailed photos, but i'm really really busy this weekend.
i'll start a thread when they're up.
cheers
Jamie
[url]www.subiegalracing.com[/url]
| 02R6 | 07-03-2003 12:44 PM |
Thank you very much. Was it hard to relocate the cruise?
| Subie Gal | 07-03-2003 01:25 PM |
[QUOTE][i]Originally posted by 02R6 [/i]
[B]Thank you very much. Was it hard to relocate the cruise? [/B][/QUOTE]
yep.... took months for them to get it fixed correctly...
i'll get photos.
heck. maybe i can use mine as a "template" for others like yourself....
Jamie
[B]Thank you very much. Was it hard to relocate the cruise? [/B][/QUOTE]
yep.... took months for them to get it fixed correctly...
i'll get photos.
heck. maybe i can use mine as a "template" for others like yourself....
Jamie
| sidewayz | 07-03-2003 04:10 PM |
[QUOTE][i]Originally posted by kenchan [/i]
[B]you need to do some research...
oh sorry oh god of mods would you care to enlighten us all with your infinate wisdom??:rolleyes:
Subie Gal : I am really interested in how you were able to mount the cruise stalk in the hub. since its a bolt on affair and all..is the stalk protruding though the hub adapter?? how were you able to use the clock spring assembly with the hub?? plus, with all of the machining done to the hub, aren't you compromising structuale integrity??
[B]you need to do some research...
oh sorry oh god of mods would you care to enlighten us all with your infinate wisdom??:rolleyes:
Subie Gal : I am really interested in how you were able to mount the cruise stalk in the hub. since its a bolt on affair and all..is the stalk protruding though the hub adapter?? how were you able to use the clock spring assembly with the hub?? plus, with all of the machining done to the hub, aren't you compromising structuale integrity??
| kenchan | 07-03-2003 04:32 PM |
oh don't worry about it. you're doing good. ;)
happy i-clubbing.
[QUOTE][i]Originally posted by sidewayz [/i]
[B][QUOTE][i]Originally posted by kenchan [/i]
[B]you need to do some research...
oh sorry oh god of mods would you care to enlighten us all with your infinate wisdom??:rolleyes:
[/B][/QUOTE]
happy i-clubbing.
[QUOTE][i]Originally posted by sidewayz [/i]
[B][QUOTE][i]Originally posted by kenchan [/i]
[B]you need to do some research...
oh sorry oh god of mods would you care to enlighten us all with your infinate wisdom??:rolleyes:
[/B][/QUOTE]
| Subie Gal | 07-03-2003 06:13 PM |
[QUOTE][i]Originally posted by sidewayz [/i]
Subie Gal : I am really interested in how you were able to mount the cruise stalk in the hub. since its a bolt on affair and all..is the stalk protruding though the hub adapter?? how were you able to use the clock spring assembly with the hub?? plus, with all of the machining done to the hub, aren't you compromising structuale integrity??[/QUOTE]
hello again :)
i will tear it apart, take photos, and explain it to the best of my abilities :) the machined hub was done in the UK by a former acquantaince.... but i'm sure someone who'd competent enough can replicate the work that's been done.
Jamie
Subie Gal : I am really interested in how you were able to mount the cruise stalk in the hub. since its a bolt on affair and all..is the stalk protruding though the hub adapter?? how were you able to use the clock spring assembly with the hub?? plus, with all of the machining done to the hub, aren't you compromising structuale integrity??[/QUOTE]
hello again :)
i will tear it apart, take photos, and explain it to the best of my abilities :) the machined hub was done in the UK by a former acquantaince.... but i'm sure someone who'd competent enough can replicate the work that's been done.
Jamie
| sidewayz | 07-03-2003 06:40 PM |
kewl..I am really interested in seeing this...I can't stand not having cruise!
| 02R6 | 07-03-2003 11:19 PM |
[QUOTE][i]Originally posted by Subie Gal [/i]
[B]
yep.... took months for them to get it fixed correctly...
i'll get photos.
heck. maybe i can use mine as a "template" for others like yourself....
Jamie [/B][/QUOTE]
You would do that, for me? I'm flattered.
Seriously though, if you're too busy or whatever it's no big deal, I was just trying to see how others have done it without sacrificing cruise control. (I had my last car for four years and it didn't have cruise, I hated that.)
Thanks again.
[B]
yep.... took months for them to get it fixed correctly...
i'll get photos.
heck. maybe i can use mine as a "template" for others like yourself....
Jamie [/B][/QUOTE]
You would do that, for me? I'm flattered.
Seriously though, if you're too busy or whatever it's no big deal, I was just trying to see how others have done it without sacrificing cruise control. (I had my last car for four years and it didn't have cruise, I hated that.)
Thanks again.
| 02R6 | 07-08-2003 02:25 AM |
Latest?
| modvp | 07-08-2003 04:03 PM |
i'm also interested!
| 02R6 | 07-10-2003 05:29 PM |
ttt
| Subie Gal | 07-10-2003 05:58 PM |
guys.. it's rally week... and weekend...
all my time = devoted to preprep and racing...
next week things will slow down...
i know you're in a rush
i wont forget.
Jamie
all my time = devoted to preprep and racing...
next week things will slow down...
i know you're in a rush
i wont forget.
Jamie
| imprezive one | 07-10-2003 07:05 PM |
I've been looking for the answer to this problem for a while now.. it's the only thing keeping me from getting a momo millenium... oh that and the fact that I don't have $280 right now too... heh heh.
| modvp | 07-11-2003 11:50 AM |
still waiting....
| 02R6 | 07-14-2003 08:08 PM |
ttt
| HiFiWRX | 10-13-2004 06:48 PM |
Yup OLD subject but still looking for answers to this situation ;) Jamie you EVER get those pics??
So BUMP
So BUMP
| 02R6 | 10-15-2004 12:30 AM |
Damn, forgot about this thread. I'd still like to see wat the options are.
Không có nhận xét nào:
Đăng nhận xét