| rayder | 03-04-2002 12:02 AM |
Kaminari news
We are going to be making (unless we get some negative responses here) carbon fiber covers for the air intake port, fuse box cover, solenoid cover, and pulley cover. We are also going to make a front skid plate and rear diff cover out of carbon kevlar (functional) as we have made these for many rally cars in the past. What do you guys think? Any other ideas or input?
We are alos making a lip kit, wing and hood as well. We will be making an optional full bumper that will accomodate FMIC installations.... and a reverse induction hood to go with the same set up.
We are alos making a lip kit, wing and hood as well. We will be making an optional full bumper that will accomodate FMIC installations.... and a reverse induction hood to go with the same set up.
| b00st3d | 03-04-2002 12:48 AM |
im in if you ever make the underhood carbon fiber stuff!
methadon
methadon
| Spooled | 03-04-2002 01:15 AM |
Me too! Gotta love CF (not too much though). Do you have any pics as to what the lip, body parts, etc. mite look like in their end-product form? Like any renderings? Thanx.
| rayder | 03-04-2002 01:56 AM |
well now, I couln't release that info now...
| mitch808 | 03-04-2002 07:02 AM |
I'm very interested in some CF pieces for under the hood.
| Lightning Jack | 03-04-2002 09:14 AM |
i would like to see front bumper and rear/sideskirt instead
i like the kits u guys made for the Focus
i like the kits u guys made for the Focus
| 128d | 03-04-2002 02:58 PM |
I have been looking for stuff like that for a long time. I would definatly be intrested in this kit if you started to make a kit.
| SubyObsessive | 03-04-2002 03:29 PM |
hey i am tellin you now, i love your kits cause they arent too flashy but still look great! i love your new celica kit...
now is there any chance that you will ever make a body kit for the older impreza's? (93-97) cause there is alot of old skool guys here who want to see more exposure for their cars, and i can vouch for that cause i am goin to buy one at the end of summer :)
if you make them, they will sell...trust me! and if you ever need a guinea pig for them.....PM me because i will be glad to test them out for you :lol: i hadda give my .02 here, thanks for listening to me whine :)
thanks
-Dan
now is there any chance that you will ever make a body kit for the older impreza's? (93-97) cause there is alot of old skool guys here who want to see more exposure for their cars, and i can vouch for that cause i am goin to buy one at the end of summer :)
if you make them, they will sell...trust me! and if you ever need a guinea pig for them.....PM me because i will be glad to test them out for you :lol: i hadda give my .02 here, thanks for listening to me whine :)
thanks
-Dan
| dwx | 03-04-2002 03:45 PM |
I'd be interested in the CF solenoid cover, since I lost mine some time ago. :lol:
| tifosi77 | 03-04-2002 05:33 PM |
I want the skid plate! I would be interested in hood and front bumper as well.
| V REX | 03-04-2002 07:01 PM |
Very intrested in CF for the engine compartment...been waiting for someone to sell it.
| Torch | 03-04-2002 07:29 PM |
Re: Kaminari news
[QUOTE][i]Originally posted by rayder [/i]
[B]We are going to be making (unless we get some negative responses here) carbon fiber covers for the air intake port, fuse box cover, solenoid cover, and pulley cover. We are also going to make a front skid plate and rear diff cover out of carbon kevlar (functional) as we have made these for many rally cars in the past. What do you guys think? Any other ideas or input?
We are alos making a lip kit, wing and hood as well. We will be making an optional full bumper that will accomodate FMIC installations.... and a reverse induction hood to go with the same set up. [/B][/QUOTE]
If you made the things you listed and the price and quality was good I would be in for sure.
I would like all carbon fiber under hood, front skid plate, lip kit, hood and depending on looks the wing too. Please keep us posted.
[B]We are going to be making (unless we get some negative responses here) carbon fiber covers for the air intake port, fuse box cover, solenoid cover, and pulley cover. We are also going to make a front skid plate and rear diff cover out of carbon kevlar (functional) as we have made these for many rally cars in the past. What do you guys think? Any other ideas or input?
We are alos making a lip kit, wing and hood as well. We will be making an optional full bumper that will accomodate FMIC installations.... and a reverse induction hood to go with the same set up. [/B][/QUOTE]
If you made the things you listed and the price and quality was good I would be in for sure.
I would like all carbon fiber under hood, front skid plate, lip kit, hood and depending on looks the wing too. Please keep us posted.
| spd wgn | 03-05-2002 07:39 AM |
post your proposal about a special bumper for a FMIC in the "Factory Forced Induction" forum....betcha you'll get lots of +++ responses there!
spd wgn
spd wgn
| Zahnster | 03-05-2002 04:11 PM |
Since you're talking about making a carbon fiber hood. How about a carbon fiber trunk as well?
| ryball | 03-05-2002 04:17 PM |
Skid plate, huh? How much do you think that will run?
| hYYpeRX | 03-05-2002 05:07 PM |
yes yes
underhood cf is good
reverse induction cf hood... very good!
How about just a reverse induction hood scoop to replace the OE piece... similiar to that made by Aqua... as well?
[url]http://www.aqua-fsp.com[/url]
that would be tasty!
reverse induction cf hood... very good!
How about just a reverse induction hood scoop to replace the OE piece... similiar to that made by Aqua... as well?
[url]http://www.aqua-fsp.com[/url]
that would be tasty!
| rayder | 03-06-2002 11:13 AM |
nice! Will pass that info to the designers.
| ryball | 03-20-2002 05:07 PM |
Any news on the front skid plate and rear diff cover out of carbon kevlar? :D
| noggin | 03-20-2002 06:49 PM |
CF jun-style eyelids for the headlights.
| 2OHOH2WRX | 03-20-2002 09:39 PM |
...what about CF/Kevlar/color (blue/yellow/silver?/etc) foglight covers (a-la WRC, look at the iClub logo, I could _really_ use a set)?
Door sills?
Trunk?
Grille?
Center gauge pod?
Pillar gauge pod(s)?
Some sort of intake horn/funnel?
Hood vents (with cutting template) that drop in?
Functional front bumper winglets? Brake horns/funnels?
Functional underbody panels (to reduce under-car turbulence, and maybe increase downforce)?
7"+ LCD center-mount display holder, either for the dash or in place of the map lights (a 10.4" laptop display would fit between the gauge hump and the airbag)?
Dash cover (heh heh heh, ok, that's really a stretch :D)?
...and last but not least, quarter panels, wide-body kits, WRC wing :D?
Door sills?
Trunk?
Grille?
Center gauge pod?
Pillar gauge pod(s)?
Some sort of intake horn/funnel?
Hood vents (with cutting template) that drop in?
Functional front bumper winglets? Brake horns/funnels?
Functional underbody panels (to reduce under-car turbulence, and maybe increase downforce)?
7"+ LCD center-mount display holder, either for the dash or in place of the map lights (a 10.4" laptop display would fit between the gauge hump and the airbag)?
Dash cover (heh heh heh, ok, that's really a stretch :D)?
...and last but not least, quarter panels, wide-body kits, WRC wing :D?
| pio!pio! | 03-21-2002 07:01 AM |
carbon hood, trunk..what about the other body panels? all carbon body would be sweet think of the weight savings! (painted of course..it would look nasty if it was unpainted and all carbon)
| 98Impreza | 03-21-2002 09:23 AM |
IM in
I will buy anything Carbon Fiber for under the hood.
| wRx14pSi | 03-21-2002 11:24 AM |
i will take some CF stuff .. email me when u get definite dates at prices.
[email][email protected][/email]
[email][email protected][/email]
| aov | 03-21-2002 12:19 PM |
Very interested in a front lip like the Prodrive style one... and everything else everyone has mentioned :)
-anders
-anders
| Darwin | 03-21-2002 12:51 PM |
Please make CF battery cover! I want some protection for mine, can be seen right through the hood vent. :D
| CO WRX | 03-21-2002 05:20 PM |
I would be very interested in the hood as I am waiting for a hood that does not have a hood scoop at all. If this is what you are planning they will sell very well as a lot of the front mount intercooler owners don't want the extra drag when it is useless. Thank you.
James
James
| Craig W | 06-13-2002 08:33 PM |
I want to put in another vote for the reversed hood scoop for the pre '02 RS! please, please, please.
| JonnySubaru | 06-13-2002 10:13 PM |
Please!!!!!!!!!
PLEASE, PLEASE, PLEASE!!!!!!!!!
Make a front lip for the WRX Wagon (Something like the WRX STI sedan lip) or just a solid lip that unifies the front bumper line!!!!
Many wagon drivers on this site have mirrored this sentiment... I'm sure this would be a good seller-
THanks =)
Make a front lip for the WRX Wagon (Something like the WRX STI sedan lip) or just a solid lip that unifies the front bumper line!!!!
Many wagon drivers on this site have mirrored this sentiment... I'm sure this would be a good seller-
THanks =)
| 128d | 06-18-2002 04:45 PM |
CF or not your guys make anything for the 02 wrx I will buy it. I love your kits and I think there would be plenty that share my feelings and would buy a body kit from you guys.
| Avedis | 06-18-2002 10:29 PM |
Something like a C-West front but that would fit a Wagon would probably get lots of ooooohs and aaaaaahs. At the very least, from myself... but I'm sure a lot of other people would be interested too. :)
--jeff
--jeff
Không có nhận xét nào:
Đăng nhận xét