| Serkan | 04-12-2013 02:50 PM |
The picture makes it look flat, prolly because of the lighting and angle.
It will be same color as exterior which is white.
It will be same color as exterior which is white.
| Smurftastic | 04-14-2013 08:52 AM |
For those that have plugged the recirculating evap line coming off the intake manifold that goes back into the turbo inlet are you just letting the evap line run to the atmosphere and plugging the inlet, or plugging both the intake manifold and the inlet?
| richy_21 | 04-14-2013 09:47 AM |
[quote="Smurftastic;39585209"]For those that have plugged the recirculating evap line coming off the intake manifold that goes back into the turbo inlet are you just letting the evap line run to the atmosphere and plugging the inlet, or plugging both the intake manifold and the inlet?[/quote]
Yeah I plugged mine it's awesome
Yeah I plugged mine it's awesome
| D Money | 04-15-2013 01:15 AM |
[quote="Bad Wagon;39442862"]The abs delete is easy. Just get a Brighton non-abs master and relocate your stock dizzy block. Get some 1/8" line and a flaring tool. Re-use your stock m10 fittings and get some nice line clamps to hold them to the body. Takes me about 3-4 hours to do an entire system. D-Moneys setup is sweet but way overkill and over thought. I bet pretty pricy too. My next setup will have an adjustable bias controller and a hydraulic e-brake I?ll be posting it in my Forester build thread after I part out the road course parts and buy the new stuff.
My new setup will be super clean. Especially with the radiator in the back... :)
Johann[/quote]
Whats up johann!
Yes, i did it the way you mentioned the first time for under $100. Lol but to build the car i wanted, i had to go all out. The setup i did was obviously not for everyones budget.
Lots of nice bays popping up! Keep em coming
My new setup will be super clean. Especially with the radiator in the back... :)
Johann[/quote]
Whats up johann!
Yes, i did it the way you mentioned the first time for under $100. Lol but to build the car i wanted, i had to go all out. The setup i did was obviously not for everyones budget.
Lots of nice bays popping up! Keep em coming
| Bad Wagon | 04-15-2013 03:28 PM |
Not much man. Just working on crazy frankencars on the DL like I usually do.. lol
| calebtharrell | 04-16-2013 12:46 PM |
[quote=under0athh51189;39505788]another new setup pic of mine. not even close to fully done but the turbo setup is done. sits more like a k20 in a Honda or rsx sitting forward instead of sideways like most rotated setups
[/quote]
Are those Spike Nuts from Downstar Inc.? I plan on installing some on my car and your car is the first Subaru I have seen them on. You beat me to it! haha The only other place I have seen that sells them is ProBolt USA. Your bay is coming along great! Keep up the good work!
[/quote]
Are those Spike Nuts from Downstar Inc.? I plan on installing some on my car and your car is the first Subaru I have seen them on. You beat me to it! haha The only other place I have seen that sells them is ProBolt USA. Your bay is coming along great! Keep up the good work!
| 11STIxx | 04-16-2013 06:17 PM |
And to think I've seen people have trouble hiding stereo install wires - these installs are amazing! really nice work on that tubbed engine bay, can't wait to see how it turns out!
| Lukas_vee23 | 04-17-2013 09:25 AM |
Nightshift performance did something like that to their bugeye but hondas dont have nearly as many wires on top as subarus
| under0athh51189 | 04-17-2013 11:42 AM |
[quote="calebtharrell;39601509"]
Are those Spike Nuts from Downstar Inc.? I plan on installing some on my car and your car is the first Subaru I have seen them on. You beat me to it! haha The only other place I have seen that sells them is ProBolt USA. Your bay is coming along great! Keep up the good work![/quote]
Haha yeah bro they are downstar bolt boys ones. I've had them for about a year and a half now and that's why I did them cause no other subys had them. :)
Are those Spike Nuts from Downstar Inc.? I plan on installing some on my car and your car is the first Subaru I have seen them on. You beat me to it! haha The only other place I have seen that sells them is ProBolt USA. Your bay is coming along great! Keep up the good work![/quote]
Haha yeah bro they are downstar bolt boys ones. I've had them for about a year and a half now and that's why I did them cause no other subys had them. :)
| Smurftastic | 04-21-2013 06:08 PM |
Just plugged the evap lines coming out the IM and going into the turbo inlet, and let the evap line vent ---- is the only way to get rid of the evap CEL to delete it with an accessport or do I need to plug the evap line too?
| ScoobyJD | 04-28-2013 03:29 AM |
Bump!
| superbike81 | 04-28-2013 07:37 AM |
Great thread!
I'm building a Factory Five 818 kit car and I want the engine bay to be very clean. Won't be using power steering or A/C, does anyone have a pic of a WRX engine bay with the power steering and A/C deleted?
I'm building a Factory Five 818 kit car and I want the engine bay to be very clean. Won't be using power steering or A/C, does anyone have a pic of a WRX engine bay with the power steering and A/C deleted?
| arisking | 04-28-2013 10:52 AM |
Here. Somewhere in this thread/site.
[IMG] http://sphotos-b.xx.fbcdn.net/hphotos-prn1/538671_10151359860820898_1311377933_n.jpg[/IMG]
[IMG] http://sphotos-b.xx.fbcdn.net/hphotos-prn1/538671_10151359860820898_1311377933_n.jpg[/IMG]
| wimprezawrx | 04-28-2013 11:21 AM |
Almost ready..
[IMG]http://www.mijnalbum.nl/GroteFoto-JRVHXNN4.jpg[/IMG]
[IMG]http://www.mijnalbum.nl/GroteFoto-JRVHXNN4.jpg[/IMG]
| superbike81 | 04-28-2013 11:54 AM |
[quote=arisking;39690795]Here. Somewhere in this thread/site.
[url]http://sphotos-b.xx.fbcdn.net/hphotos-prn1/538671_10151359860820898_1311377933_n.jpg[/url][/quote]
Thanks for the pic, looks great!
Has anyone with a more stock(ish) setup done a PS and/or A/C delete? I'll be using a TMIC setup for simplicity. Turbo location will remain stock as well.
[url]http://sphotos-b.xx.fbcdn.net/hphotos-prn1/538671_10151359860820898_1311377933_n.jpg[/url][/quote]
Thanks for the pic, looks great!
Has anyone with a more stock(ish) setup done a PS and/or A/C delete? I'll be using a TMIC setup for simplicity. Turbo location will remain stock as well.
| arisking | 04-28-2013 12:13 PM |
No problem. Wish my bay looked like that. But I enjoy my PS. Haha.
| Big-Sexy907 | 05-01-2013 08:08 AM |
Anyone thought about going with a electric PS Pump from a MR2?
Are there electric water pumps available for us?
Are there electric water pumps available for us?
| Jackie leggs | 05-01-2013 08:19 AM |
Why would you want an electric water pump? It is out of sight under the timing cover.
| Big-Sexy907 | 05-01-2013 09:00 AM |
Cause I was considering running no covers and going with custom billet pulleys...
| vms150 | 05-01-2013 09:39 AM |
You would need a shorter timing belt then or still need an idler pulley in that spot to replace the water pump pulley there. Seems like an awful idea.
| under0athh51189 | 05-02-2013 01:52 PM |
a few new pics. not even close to being finished yet, just waiting to get it home from tuning then gonna start installing all my chasebays stuff and get ready to pull the motor for the full shave
[IMG]https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/246643_327823530677863_1856209539_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-ash4/215383_327823574011192_1027137268_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/575585_327824087344474_472095629_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash4/246643_327823530677863_1856209539_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-ash4/215383_327823574011192_1027137268_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/575585_327824087344474_472095629_n.jpg[/IMG]
| under0athh51189 | 05-07-2013 02:16 PM |
this thread is dead. sooo here are a few from yesterday with my new prosport titanium turbo blanket on. I must say this thing is high quality and for the price is awesome.
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/198955_329805217146361_1065964003_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/308619_329805240479692_1349088497_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/417891_329805193813030_1115559918_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/198955_329805217146361_1065964003_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc1/308619_329805240479692_1349088497_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc1/417891_329805193813030_1115559918_n.jpg[/IMG]
| 05subysti | 05-07-2013 03:26 PM |
Looks good underoath
| under0athh51189 | 05-07-2013 03:42 PM |
[quote="05subysti;39756456"]Looks good underoath[/quote]
Thanks,along way to still go.
Thanks,along way to still go.
| subarutah | 05-07-2013 05:53 PM |
looking really good underoath!
Update on my bay. Just waiting on everything to come back from powdercoating/plating/anodizing and then it's reassemble/tune/ready to roll :D
Update on my bay. Just waiting on everything to come back from powdercoating/plating/anodizing and then it's reassemble/tune/ready to roll :D
| under0athh51189 | 05-07-2013 06:52 PM |
[quote="subarutah;39757618"]looking really good underoath!
Update on my bay. Just waiting on everything to come back from powdercoating/plating/anodizing and then it's reassemble/tune/ready to roll :D[/quote]
Thanks. What color did you go? Guessing chrome plating with some sick color
Update on my bay. Just waiting on everything to come back from powdercoating/plating/anodizing and then it's reassemble/tune/ready to roll :D[/quote]
Thanks. What color did you go? Guessing chrome plating with some sick color
| subarutah | 05-07-2013 07:19 PM |
[quote=under0athh51189;39757960]Thanks. What color did you go? Guessing chrome plating with some sick color[/quote]
nah I went with a really poppy red for both powder coating and anodizing
nah I went with a really poppy red for both powder coating and anodizing
| under0athh51189 | 05-07-2013 08:16 PM |
[quote="subarutah;39758123"]
nah I went with a really poppy red for both powder coating and anodizing[/quote]
Nice gonna look great Im sure
nah I went with a really poppy red for both powder coating and anodizing[/quote]
Nice gonna look great Im sure
| Voltwings | 05-07-2013 10:20 PM |
A nice shave / tuck is nice but theres almost a point where its odd because the engine bay looks TOO empty...
| Smurftastic | 05-11-2013 07:46 AM |
Looks odd, or extra place to hide midgets? You be the judge...
| Dpwhitehead1 | 05-11-2013 09:25 AM |
[quote="Smurftastic;39784133"]Looks odd, or extra place to hide midgets? You be the judge...[/quote]
Hey hey! They're called little people ... I think
Hey hey! They're called little people ... I think
| under0athh51189 | 05-12-2013 10:28 PM |
heres a few ok cell pics
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/923025_332026570257559_2086407928_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-snc6/184466_331970836929799_301520966_n.jpg[/IMG]
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/923025_332026570257559_2086407928_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-snc6/184466_331970836929799_301520966_n.jpg[/IMG]
| 207STi | 05-13-2013 04:52 PM |
I just don't understand how you could spend so many countless hours cleaning up the engine bay and then slap a bunch of gigantic stickers all over your windshield/fender/bumper. I have a ton of respect for the work you have put into this, but I can't help but feeling like those stickers take away from the cleanliness of the car/bay.
| mprezme | 05-13-2013 04:55 PM |
[quote=207STi;39798298]I just don't understand how you could spend so many countless hours cleaning up the engine bay and then slap a bunch of gigantic stickers all over your windshield/fender/bumper. I have a ton of respect for the work you have put into this, but I can't help but feeling like those stickers take away from the cleanliness of the car/bay.[/quote]
I am against advertising, unless their a benefit coming from it. So i agree with adobe statement. if he benefiting slap on more
I am against advertising, unless their a benefit coming from it. So i agree with adobe statement. if he benefiting slap on more
| kpluiten | 05-13-2013 06:38 PM |
[quote=207STi;39798298]I just don't understand how you could spend so many countless hours cleaning up the engine bay and then slap a bunch of gigantic stickers all over your windshield/fender/bumper. I have a ton of respect for the work you have put into this, but I can't help but feeling like those stickers take away from the cleanliness of the car/bay.[/quote]
[quote=mprezme;39798320]I am against advertising, unless their a benefit coming from it. So i agree with adobe statement. if he benefiting slap on more[/quote]
I have to agree. I love the work you're doing other than that. I've got one company sticker on my car and they gave me a sample of their product to install and use. And even then, the sticker is small and subtle. Again, strong work otherwise.
[quote=mprezme;39798320]I am against advertising, unless their a benefit coming from it. So i agree with adobe statement. if he benefiting slap on more[/quote]
I have to agree. I love the work you're doing other than that. I've got one company sticker on my car and they gave me a sample of their product to install and use. And even then, the sticker is small and subtle. Again, strong work otherwise.
| under0athh51189 | 05-13-2013 09:05 PM |
Yeah I feel ya on the stickers but they are all sponsors so I've gotta support them.
| Smurftastic | 05-17-2013 10:56 PM |
Still a lot of work to do, but gettin there
[IMG]http://img7.imageshack.us/img7/4521/dscn0477sa.jpg[/IMG]
[IMG]http://img7.imageshack.us/img7/4521/dscn0477sa.jpg[/IMG]
| Serkan | 05-18-2013 10:51 AM |
^ Wow that looks really clean...
Mine is getting there slowly
[URL=http://s44.photobucket.com/user/3xtr3m3/media/IMG_1243.jpg.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/IMG_1243.jpg[/IMG][/URL]
[URL=http://s44.photobucket.com/user/3xtr3m3/media/IMG_1236.jpg.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/IMG_1236.jpg[/IMG][/URL]
Mine is getting there slowly
[URL=http://s44.photobucket.com/user/3xtr3m3/media/IMG_1243.jpg.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/IMG_1243.jpg[/IMG][/URL]
[URL=http://s44.photobucket.com/user/3xtr3m3/media/IMG_1236.jpg.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/IMG_1236.jpg[/IMG][/URL]
| 3mlwhly | 05-18-2013 12:02 PM |
[quote="Serkan;39833800"]^ Wow that looks really clean...
Mine is getting there slowly
[URL="http://s44.photobucket.com/user/3xtr3m3/media/IMG_1243.jpg.html"][/URL]
[URL="http://s44.photobucket.com/user/3xtr3m3/media/IMG_1236.jpg.html"][/URL][/quote]
Nice metal work... Almost don't need filler, I'm jelous
Mine is getting there slowly
[URL="http://s44.photobucket.com/user/3xtr3m3/media/IMG_1243.jpg.html"][/URL]
[URL="http://s44.photobucket.com/user/3xtr3m3/media/IMG_1236.jpg.html"][/URL][/quote]
Nice metal work... Almost don't need filler, I'm jelous
| Big-Sexy907 | 05-18-2013 12:08 PM |
Was that replaced with single bent sheets? It looks fluid and smooth!!! Tell us your secrets!
| Serkan | 05-18-2013 01:11 PM |
I cut out all the factory sheeting on both sides and replaced with 16 gauge sheet metal.
There are no secrets really. I measure 10 times and cut things gradually to get perfect fit.
I can give you an example.
The walls on the sides are one piece and they measure different in every corner.
The measurements aren't exact but to show you how to do it in steps. You cut you try to fit, if it needs more trimming, cut more. Don't try to cut it one time and expect it to be perfect.
[URL=http://s44.photobucket.com/user/3xtr3m3/media/panel.png.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/panel.png[/IMG][/URL]
Warping while welding is the biggest challenge. You cannot weld everything at one shot.
There are no secrets really. I measure 10 times and cut things gradually to get perfect fit.
I can give you an example.
The walls on the sides are one piece and they measure different in every corner.
The measurements aren't exact but to show you how to do it in steps. You cut you try to fit, if it needs more trimming, cut more. Don't try to cut it one time and expect it to be perfect.
[URL=http://s44.photobucket.com/user/3xtr3m3/media/panel.png.html][IMG]http://i44.photobucket.com/albums/f42/3xtr3m3/panel.png[/IMG][/URL]
Warping while welding is the biggest challenge. You cannot weld everything at one shot.
| 3mlwhly | 05-18-2013 02:15 PM |
Looks really good... Post pics when your done
| Big-Sexy907 | 05-18-2013 09:09 PM |
That's what I was thinking you did, I'm about to undertake the same idea and hand form all my panels.
| richy_21 | 05-18-2013 11:09 PM |
Damn that's clean! I wish I had the balls to chop up mine like that!
| Big-Sexy907 | 05-18-2013 11:33 PM |
Cut it up Richy!!!
| richy_21 | 05-18-2013 11:36 PM |
[quote="Big-Sexy907;39837343"]Cut it up Richy!!![/quote]
Bro trust I would if I had like a practice car! I've never like my odds when I only have one shot.
Bro trust I would if I had like a practice car! I've never like my odds when I only have one shot.
| xxp0werrangersxx | 05-18-2013 11:42 PM |
[quote=under0athh51189;39793263]heres a few ok cell pics
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/923025_332026570257559_2086407928_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-snc6/184466_331970836929799_301520966_n.jpg[/IMG][/quote]
ermahgerd
[IMG]https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash3/923025_332026570257559_2086407928_n.jpg[/IMG]
[IMG]https://sphotos-a.xx.fbcdn.net/hphotos-snc6/184466_331970836929799_301520966_n.jpg[/IMG][/quote]
ermahgerd
| Smurftastic | 05-19-2013 12:16 AM |
[quote="richy_21;39837356"]
Bro trust I would if I had like a practice car! I've never like my odds when I only have one shot.[/quote]
You can always redo it if it doesn't work the first time!
Bro trust I would if I had like a practice car! I've never like my odds when I only have one shot.[/quote]
You can always redo it if it doesn't work the first time!
| richy_21 | 05-19-2013 12:08 PM |
[quote="Smurftastic;39837536"]
You can always redo it if it doesn't work the first time![/quote]
I volunteer your services and big you too!
You can always redo it if it doesn't work the first time![/quote]
I volunteer your services and big you too!
| Big-Sexy907 | 05-19-2013 12:15 PM |
Lol, Richy I'm gonna be plenty busy with mine... Give me a year to finish then maybe... Btw you're buying the airfare lol
| richy_21 | 05-19-2013 01:52 PM |
[quote="Big-Sexy907;39839027"]Lol, Richy I'm gonna be plenty busy with mine... Give me a year to finish then maybe... Btw you're buying the airfare lol[/quote]
That's easy since I do ATC! Now then let's talk dates lol.
That's easy since I do ATC! Now then let's talk dates lol.
| Big-Sexy907 | 05-19-2013 03:23 PM |
Lol, dear lord, what have I gotten myself into.
Btw, I just received two of the three packages of Dmoney's old parts.
Btw, I just received two of the three packages of Dmoney's old parts.
| richy_21 | 05-19-2013 04:03 PM |
[quote="Big-Sexy907;39839862"]Lol, dear lord, what have I gotten myself into.
Btw, I just received two of the three packages of Dmoney's old parts.[/quote]
Lol heck ya. His abs delete is tempting
Btw, I just received two of the three packages of Dmoney's old parts.[/quote]
Lol heck ya. His abs delete is tempting
| Big-Sexy907 | 05-19-2013 04:10 PM |
Already started mine, hit Taylor up and buy it already!
| richy_21 | 05-19-2013 05:23 PM |
[quote="Big-Sexy907;39840089"]Already started mine, hit Taylor up and buy it already![/quote]
Nah I'm good! I really wanted the caps tho
Nah I'm good! I really wanted the caps tho
| ScoobyJD | 05-19-2013 06:22 PM |
[quote="subarutah;39475221"]
Progress[/quote]
What is your build link I would love to see more!
Progress[/quote]
What is your build link I would love to see more!
| 04ImprezaWRX | 05-19-2013 10:42 PM |
[quote="richy_21;39840445"]
Nah I'm good! I really wanted the caps tho[/quote]
Richy.... Package deal. Kid needs a lift kit lol
Nah I'm good! I really wanted the caps tho[/quote]
Richy.... Package deal. Kid needs a lift kit lol
| Big-Sexy907 | 05-25-2013 12:51 AM |
What caps?
| subarutah | 05-25-2013 12:58 AM |
[quote="ScoobyJD;39840693"]
What is your build link I would love to see more![/quote]
No such thing, too lazy to make one lol.
[IMG]http://i905.photobucket.com/albums/ac251/justinkader1/IMG_3991_zps70e9a928.jpg[/IMG]
Paint matched timing covers :)
[IMG]http://i905.photobucket.com/albums/ac251/justinkader1/IMG_4001_zpsdb2b7978.jpg[/IMG]
What is your build link I would love to see more![/quote]
No such thing, too lazy to make one lol.
[IMG]http://i905.photobucket.com/albums/ac251/justinkader1/IMG_3991_zps70e9a928.jpg[/IMG]
Paint matched timing covers :)
[IMG]http://i905.photobucket.com/albums/ac251/justinkader1/IMG_4001_zpsdb2b7978.jpg[/IMG]
| ScoobyJD | 05-25-2013 02:48 AM |
Nice firewall shave, why not shave into the center though after all that hard work!?
Không có nhận xét nào:
Đăng nhận xét