| saewickson | 01-09-2002 10:21 PM |
back to the Q&A:
Here goes, the cost will be nominal for the color match. I looked for it today and called a couple suppliers and got a couple prices, not too bad for both you the consumer and myself on the production side (your cost will be my cost). Also thanks WRKnFX1974 for another viable option.
The pod will be very similar with some slight changes:
1>the first to be released will be a 52 and a 60.
2>the hood height is significantly lower on the 52 and slightly on
the 60 (due to the fact the have been slightly sunken into the
base) ***I will post up exactly how much tommorow afternoon
3>They will be angled toward the driver.
As for will it be tied into the vents, only on the GC8. And before you get upset, we will produce and release a full C/F interior kit this spring along with the modified hood/ bonnet (in C/F and Glass) and the trunk lid in both materials as well.
Since I have the molds and can run all the different fibers in the same mold I will make it availible in C/F, fiberglass (colormatched), Kevlar, and carbon kevlar (black and blue, black and yellow, black and red). So, you will have choices. Pics within the week. probably of the proto pieces and will post up more as we see fit and feel confident it is the finished look.
Thanks,
KaSpeR
Here goes, the cost will be nominal for the color match. I looked for it today and called a couple suppliers and got a couple prices, not too bad for both you the consumer and myself on the production side (your cost will be my cost). Also thanks WRKnFX1974 for another viable option.
The pod will be very similar with some slight changes:
1>the first to be released will be a 52 and a 60.
2>the hood height is significantly lower on the 52 and slightly on
the 60 (due to the fact the have been slightly sunken into the
base) ***I will post up exactly how much tommorow afternoon
3>They will be angled toward the driver.
As for will it be tied into the vents, only on the GC8. And before you get upset, we will produce and release a full C/F interior kit this spring along with the modified hood/ bonnet (in C/F and Glass) and the trunk lid in both materials as well.
Since I have the molds and can run all the different fibers in the same mold I will make it availible in C/F, fiberglass (colormatched), Kevlar, and carbon kevlar (black and blue, black and yellow, black and red). So, you will have choices. Pics within the week. probably of the proto pieces and will post up more as we see fit and feel confident it is the finished look.
Thanks,
KaSpeR
| NoLimitWRX | 01-10-2002 12:04 AM |
Sounds Sweet!
Thanks for being quick to answer everyone's questions!:D
I'm definitelty In for a 3 gauge, 60mm CF hood.
I hope these look as good as I'm thinking!:D Where do I send the Money?!:D :D
Sean:D
I'm definitelty In for a 3 gauge, 60mm CF hood.
I hope these look as good as I'm thinking!:D Where do I send the Money?!:D :D
Sean:D
| dwx | 01-10-2002 12:16 AM |
I just purchased some more greddy gauges from the group buy in anticipation of the 52mm pod. :D
Phil
Phil
| saewickson | 01-10-2002 12:46 AM |
Tomorrow I will start to assemble what will be one of the first pods to see production the 52 angled and the 60 angled. These will be boxed and ready to ship by sometime february (if I could push up the time frame I would, but mold prep and breakin take time). I hope this does not inconvenience anyone. I will private mail, e-mail, or post up when they are shippable.
The pod that will incorporate the boost controller and contain the clock will run next. From their on out we will produce these three and variations upon special request. The GC 8 will run a couple of weeks behind the WRX.
We will release products for the WRX and the GC8 in waves, I hope to get a website up and running as soon as possible and will set up the hot sheats (what to look for in the months to come, previews, and possible release dates).
I hope this clarifies what will happen in the weeks to follow,
KaSpeR
The pod that will incorporate the boost controller and contain the clock will run next. From their on out we will produce these three and variations upon special request. The GC 8 will run a couple of weeks behind the WRX.
We will release products for the WRX and the GC8 in waves, I hope to get a website up and running as soon as possible and will set up the hot sheats (what to look for in the months to come, previews, and possible release dates).
I hope this clarifies what will happen in the weeks to follow,
KaSpeR
| girl | 01-10-2002 01:24 AM |
awesome product! keep on keeping us posted.
| scoobygator | 01-10-2002 08:27 AM |
Sign me up
I'm in for a 52 triple in CF for my WRX.:cool:
| saewickson | 01-10-2002 12:02 PM |
As promised here is the height on the 52 pod:
The overall height at the max point is 2 and 15/16 may be even 3 flat, well actually a little less but I will stick buy this figure. Why, cause I am figuring in possible growth of the mold and the proto.
I read the entire post again this morning, and will apply this to the height of the other one.
The defi measures 3.8 inches at the max point, ours will be no taller than 3 inches on the 52mm pod, and the 60 mm pod is not much taller due to some augmentation.
I will continue to work with the proto and may have a rough glass image to post up around midnight e.s.t.. Please be patient if I don't have the image by then, I am going to try to have it up though. Also let me know if this is satisfactory, and it looks like I will tilt all gauges approximately 4 degrees not much but do aid in ease of viewing.
KaSpeR
The overall height at the max point is 2 and 15/16 may be even 3 flat, well actually a little less but I will stick buy this figure. Why, cause I am figuring in possible growth of the mold and the proto.
I read the entire post again this morning, and will apply this to the height of the other one.
The defi measures 3.8 inches at the max point, ours will be no taller than 3 inches on the 52mm pod, and the 60 mm pod is not much taller due to some augmentation.
I will continue to work with the proto and may have a rough glass image to post up around midnight e.s.t.. Please be patient if I don't have the image by then, I am going to try to have it up though. Also let me know if this is satisfactory, and it looks like I will tilt all gauges approximately 4 degrees not much but do aid in ease of viewing.
KaSpeR
| WRXnFX | 01-10-2002 02:14 PM |
Can't wait to see those prot pics. Kasper, you're doing a great job keeping us informed. Keep up the good work and take your time. I want it done right and not rushed. Winslow
| NoLimitWRX | 01-10-2002 04:30 PM |
Sounds Good!!
:D :D
:D :D
| saewickson | 01-11-2002 12:49 AM |
I have a couple of images that are not bad of the hood. They are not bad, but I will only post up this one image (taken a while back) of the initial sheet design. If you look around the sketch you will see the fabrics that it will be offered in, the red and white is split glass kevlar and fiberglass. This will be the material used for the colormatcehed hood (it is stronger and more durable than straigh fiberglass.
Well this is just a taste, the real images will be up soon. And we were able to move the gauges closer to the driver on the 52 size allowed us to do so. This may help to compensate for the smaller size. Oh and the grey area between the gauges is Lexan on the proto (b/c a friend is putting a shift light in behind the gauges.
Well I hope to have it up tomorrow I have to resize the image, and adjust it. sorry for the inconvinience.
KaSpeR
Well this is just a taste, the real images will be up soon. And we were able to move the gauges closer to the driver on the 52 size allowed us to do so. This may help to compensate for the smaller size. Oh and the grey area between the gauges is Lexan on the proto (b/c a friend is putting a shift light in behind the gauges.
Well I hope to have it up tomorrow I have to resize the image, and adjust it. sorry for the inconvinience.
KaSpeR
| aspera | 01-11-2002 03:18 AM |
keen interest in triple 60mm angled carbon fiber pod
| jimb | 01-11-2002 07:20 AM |
Definately interested in the 52, sounds perfect..
jb
jb
| lgkahn | 01-11-2002 09:04 AM |
Interested in the 52mm with 3 gauges or 2 with clock possibly
but in blue/black CF????
but in blue/black CF????
| Torch | 01-11-2002 03:14 PM |
I am interested in the triple angled carbon fiber 60mm gauge pod. Cannot wait to see the pics.
Torch
Torch
| SnoGuy | 01-11-2002 06:26 PM |
I'm interested in the pod with the oem clock :)
I'm always late :p
I'm always late :p
| saewickson | 01-11-2002 08:40 PM |
I work weekends and have not had the chance to post up the pics yet, I will get to them as soon as possible. I apolagize for the delay, but the pods will be boxed and ready to ship by mid february.
Thanks again i-clubbers for your understanding and interest,
KaSpeR
as for the blue and black as Igkahn refered to we use that primarily on hoods and interior pieces and will be available upon special request.
Thanks again i-clubbers for your understanding and interest,
KaSpeR
as for the blue and black as Igkahn refered to we use that primarily on hoods and interior pieces and will be available upon special request.
| WRXGuyInUSA | 01-11-2002 08:54 PM |
I'm deffinetely interested in the 52mm also...
Can't wait to see the pics!!!!
Can't wait to see the pics!!!!
| DannyGT | 01-12-2002 12:59 AM |
IM definitly in for the 52mm version if the defi style c/f pod...
| wieger54 | 01-12-2002 08:12 AM |
Here...
[IMG]http://www.mrtrally.com.au/performance/photo/mrt222.jpg[/IMG]
and...[IMG]http://www.mrtrally.com.au/performance/photo/mrt252.jpg[/IMG]
and this... [IMG]http://www.mrtrally.com.au/performance/photo/mrt254.jpg[/IMG]
you should make it so the gauges are facing toward the driver like so...[IMG]http://www.mrtrally.com.au/shop/images/products/SUWB250F.jpg[/IMG]
mike...
[IMG]http://www.mrtrally.com.au/performance/photo/mrt222.jpg[/IMG]
and...[IMG]http://www.mrtrally.com.au/performance/photo/mrt252.jpg[/IMG]
and this... [IMG]http://www.mrtrally.com.au/performance/photo/mrt254.jpg[/IMG]
you should make it so the gauges are facing toward the driver like so...[IMG]http://www.mrtrally.com.au/shop/images/products/SUWB250F.jpg[/IMG]
mike...
| aspera | 01-12-2002 11:56 AM |
Yes! I like those.
| saewickson | 01-12-2002 08:51 PM |
Not bad, we are doing them a little different though. Yes, the gauges will face the driver. They will more closely resemble the ones porkchop posted up, but slightly modified. One thing that I will say and no offense wieger54, b/c I do not know if you produce these yourself, purchased them or obtained the images online, but the fiber on those is no where near the quality that we put out (on the second one). It appears to be over stressed, and incongruent with the contours of the structure. Please do not take this as a personal attack or bashing, I do appreciate everyones input. We will try to keep fibers flowing as close as possible to the contours of the structure and may have one seam about to mills wide.
I will try to post up a prototype fiberglass image within the week, and then gather feedback again and either scrap the proto and start over or go to production.
Thanks everyone!!!
KaSpeR
I will try to post up a prototype fiberglass image within the week, and then gather feedback again and either scrap the proto and start over or go to production.
Thanks everyone!!!
KaSpeR
| WRXnFX | 01-12-2002 08:56 PM |
If you do post pics of the prototype, then start a new thread and post a link here for us. It would be kind of nice for new readers to not have to sift through everyone's suggestions. Winslow
| saewickson | 01-12-2002 10:30 PM |
thanks winslow, I do plan to, I will label it something like proto pics of c/f pod. The easiet way to know, is if you see a post under the name "saewickson". This thread has gotten really long, and seems just when the posts stop I check back and see there is one or two new ones. I enjoy reading the suggestions and really do appreciate them. I printed out a copy of the post and will keep it in a file marked "Subaru".
I will still periodically check this thread (about the same as I do now), so if you post, I will reply.
Thanks again everyone, the feedback and suggestions have been great!
KaSpeR
I will still periodically check this thread (about the same as I do now), so if you post, I will reply.
Thanks again everyone, the feedback and suggestions have been great!
KaSpeR
| wieger54 | 01-13-2002 10:41 AM |
saewickson: Don't worry I didn't make them or buy them. I just got them (or stole) off a website. :devil: I just wanted to give a better example of what I was trying to explain. Like they say...a picture is worth a thousand words. (give or take a few hundred) I can't wait to see your prototype. Good luck!!;)
mike...
mike...
| 2k2 | 01-13-2002 08:14 PM |
Sae, I pm'ed and Emailed you regarding your PM to me.
Just making sure you got them.
If not ill resend.
Just making sure you got them.
If not ill resend.
| saewickson | 01-13-2002 10:39 PM |
Sent you another pm 2k2blackWRX, I thought I replied to all of the PM's, but maybe I missed one.
As for an update I will work most of the day tomorrow on the hood. Should have most of the hood complete, by tuesday or wednsday i will post up the pics in a couple of days. Look for ut to be under a new topic probably prototype gauge pod images>
KaSpeR
As for an update I will work most of the day tomorrow on the hood. Should have most of the hood complete, by tuesday or wednsday i will post up the pics in a couple of days. Look for ut to be under a new topic probably prototype gauge pod images>
KaSpeR
| wonthanhboi | 01-15-2002 11:04 PM |
Hmm... a suggestion?
hows about, interior color and optional carbon fiber trim on the FACE of the pod? ANd of course billet aluminum matching interior trim color also?
Or maybe that'll cost too much? I don't know. ANyone else out there with me on this one? I really think that a factory interior color body of the pod and a billet/brushed or wutever comes standard trim on the car would look EXTREMELY beautiful.
Heck, what do i know? Just a suggestion. I'll certainly match the interior and look stock but still edgy. ANYONE???
BUELLER? ANYONE? BUELLER?
Or maybe that'll cost too much? I don't know. ANyone else out there with me on this one? I really think that a factory interior color body of the pod and a billet/brushed or wutever comes standard trim on the car would look EXTREMELY beautiful.
Heck, what do i know? Just a suggestion. I'll certainly match the interior and look stock but still edgy. ANYONE???
BUELLER? ANYONE? BUELLER?
| bobgrice | 01-16-2002 01:24 AM |
So you can keep up with numbers, I am interested in the factory-colored 60mm triple pod, angled towards the driver.
Looks great.
Looks great.
| sherifx | 01-16-2002 01:28 AM |
[QUOTE][i]Originally posted by bobgrice [/i]
[B]So you can keep up with numbers, I am interested in the factory-colored 60mm triple pod, angled towards the driver.
Looks great. [/B][/QUOTE]
Then just get the Defi unit and cut some sort of rubber support that will make them protrude a lil' at an angle.
[B]So you can keep up with numbers, I am interested in the factory-colored 60mm triple pod, angled towards the driver.
Looks great. [/B][/QUOTE]
Then just get the Defi unit and cut some sort of rubber support that will make them protrude a lil' at an angle.
| saewickson | 01-16-2002 05:06 PM |
We will have the 60's at an angle will do the 52's first and then the 60's for tthose who want them. Also will have the GC8's seeing the light of day here soon. I will see about doing the interior color trim around the gauges no gurantee on this though. I will PM "wonthanhboi", when I know may take a couple of days though.
Thanks again,
kasper
Thanks again,
kasper
| BlueCamel | 01-16-2002 05:48 PM |
Oh please oh please post a picture. I so much want to say that "I'm in" but need to see the pod first :)
From what I gather:
a) It's simmilar to the Defi pod but 0.8" shorter in hieght.
b) holds 3 52mm gauges
c) may or may not be available to match the WRX 02 factory dash color.
Yes, I've seen the picts in this thread but I would prefer to see the actual product (or sample products) :)
From what I gather:
a) It's simmilar to the Defi pod but 0.8" shorter in hieght.
b) holds 3 52mm gauges
c) may or may not be available to match the WRX 02 factory dash color.
Yes, I've seen the picts in this thread but I would prefer to see the actual product (or sample products) :)
| saewickson | 01-16-2002 07:43 PM |
I sent a flat panel sketch to a few people, but did not post it up due to the pic being huge. I also have one that is almost done on CAD. The proto itself is nearing completion. This is the latest news....
the base will use replaceable kevlar clips (true plastic tends to break and be brittle) it will be shipped with 4 extra clips. Plus kevlar tends to be bomb proof.
it may or may not include lexan shift light windows (buyers call).
It will be available in both color match fiberglass and C/F.
BlueCamel or anyone who would like to see the prototype flatpanel image e-mail me at [email][email protected][/email] and I will send it to you (be warned it is about 875k)
thanks
kasper
the base will use replaceable kevlar clips (true plastic tends to break and be brittle) it will be shipped with 4 extra clips. Plus kevlar tends to be bomb proof.
it may or may not include lexan shift light windows (buyers call).
It will be available in both color match fiberglass and C/F.
BlueCamel or anyone who would like to see the prototype flatpanel image e-mail me at [email][email protected][/email] and I will send it to you (be warned it is about 875k)
thanks
kasper
| Avedis | 01-16-2002 10:20 PM |
I really want a 52mm tri-gauge pod set in the non-CF that faces the driver... but I [b]really[/b] want to see a picture first. :D
--jeff
--jeff
| monkeytronZ | 01-17-2002 12:01 AM |
yeah! pictures!
| wonthanhboi | 01-17-2002 12:08 AM |
HmM
I hope you're clear on what i meant about the interior trim. You know, that billet aluminum-like trim around the system dash. Something like that would REALLY blend in well. Like, the defi pod is round, maybe the roundtips of the hood had billet aluminum? Agh, i hope you get what i'm saying SAE.
I think that this option would look a WHOLE lot better for the interior of the car. Well, only if you have the billet interior trim instead of the carbon fiber factory option. Makes the pod blend in SOOOO well. I have sucha clear picture of the pod in my head. Man, too bad i don't have the time or resources. :( .
Wellz, hope you can elaborate with pictures and pricing. BYE
I think that this option would look a WHOLE lot better for the interior of the car. Well, only if you have the billet interior trim instead of the carbon fiber factory option. Makes the pod blend in SOOOO well. I have sucha clear picture of the pod in my head. Man, too bad i don't have the time or resources. :( .
Wellz, hope you can elaborate with pictures and pricing. BYE
| Avedis | 01-17-2002 08:24 AM |
Pics posted
The "proto sketch" is on my website now, [URL=http://students.washington.edu/avedis/wrx/proto_sketch.jpg]click here[/URL] to see it.
I'll post the finished pictures on my website, too, once saewickson finishes the product and sends me a picture. :D
--jeff
I'll post the finished pictures on my website, too, once saewickson finishes the product and sends me a picture. :D
--jeff
| saewickson | 01-17-2002 10:24 AM |
this only a proto flat panel image like I said it would be.... I will post up the true image as soon as I feel confident that the proto I have is the one that will see production....
I will post up an explantion of what you are looking at as soon as I get back to my other computer, so I will just simply edit this post....
Thanks Avedis, and to everyon else who has e-mailed me and contributed to this thread,
kasper
I will post up an explantion of what you are looking at as soon as I get back to my other computer, so I will just simply edit this post....
Thanks Avedis, and to everyon else who has e-mailed me and contributed to this thread,
kasper
| ezparts | 01-17-2002 01:36 PM |
any pics of the CF air box?
| Ferg | 01-17-2002 03:29 PM |
This sounds exactly what I'm looking for.
Put me in for a 60mm carbor fibre.
Can't wait. Must have soon!
Put me in for a 60mm carbor fibre.
Can't wait. Must have soon!
| wonthanhboi | 01-23-2002 01:17 AM |
holy son of a mother!!!
good lord, i was searching for this darned thread and couldnt find it. Agh, luckily i remembered saewickson's username. Man, anyways, any updates?
| saewickson | 01-23-2002 12:22 PM |
Wow, just when I thought this post had died it rises from the dead once again.
At this time (12:15PM E.S.T.), I am working on the pod. I will do a couple of final test fits, hopefully Friday or Saturday. From there I will post up the pics of the proto to gather feedback, and will then go to production if it gets the I-Club members seal of approval.
One recent development is, the pod has presented a unique challenge in the C/F version but nothing major. I did a test of dry layed C/F and found the weave likes to become disoriented (nothing major it just makes it look amatuer) as it comes into the gauge location. So I have to options:
1. splice it and run a 2mm seam around the face.
2. simply blackout the gauge face location
Well that is the news as of late, thanks for the check in,
kasper
At this time (12:15PM E.S.T.), I am working on the pod. I will do a couple of final test fits, hopefully Friday or Saturday. From there I will post up the pics of the proto to gather feedback, and will then go to production if it gets the I-Club members seal of approval.
One recent development is, the pod has presented a unique challenge in the C/F version but nothing major. I did a test of dry layed C/F and found the weave likes to become disoriented (nothing major it just makes it look amatuer) as it comes into the gauge location. So I have to options:
1. splice it and run a 2mm seam around the face.
2. simply blackout the gauge face location
Well that is the news as of late, thanks for the check in,
kasper
| DannyGT | 01-23-2002 12:44 PM |
Ya 2mm polished lip would look cool.
| porkchop | 01-23-2002 12:45 PM |
I'm glad the project continues on...I know theres many people waiting on this...including myself! =)
I have my gauges..just no home for it..
I had a few questions...
what will the retaining tabs be made out of? Just in case if we need to remove the pod from the car, will the tab stand up to that kind of abuse?
and
the gauge plate(where the gauges fit into the pod) will that be an insert? or a single piece with the pod? I think it'll be neat if you can sell inserts so people can run 52mm or 60mm and can change rather they want the gauges face the driver or straight back.....
just some thoughts..=)
Keep up the good work! and if you need help with anything...you have my email..=)
Thanks again
Tommy
I have my gauges..just no home for it..
I had a few questions...
what will the retaining tabs be made out of? Just in case if we need to remove the pod from the car, will the tab stand up to that kind of abuse?
and
the gauge plate(where the gauges fit into the pod) will that be an insert? or a single piece with the pod? I think it'll be neat if you can sell inserts so people can run 52mm or 60mm and can change rather they want the gauges face the driver or straight back.....
just some thoughts..=)
Keep up the good work! and if you need help with anything...you have my email..=)
Thanks again
Tommy
| Avedis | 01-23-2002 04:38 PM |
I'm still interested in the non-CF one. :D
--jeff
--jeff
| saewickson | 01-23-2002 10:20 PM |
the clips are an issue that I have been beating my head against a wall about. I have 2 possabilities. The one I believe will be present on the finished product will be a Kevlar Clip, it will be replaceable and will be shipped with 4 extra clips (emergency back-up. And for those in the know, Kevlar is probably one of the most durable materials availible on the market.
Another possible option is, a friend owns an factory that produce 8 GM injection molded retainers. I may be able to give him either a CAD image or one of my plugs to manufacture this piece for me. But, I have the feeling it would raise the price of the piece beyond what I would like to see. I will look into this possability later in the week.
Expect to see the kevlar clips though, I believe they will be the most durable and keep the cost low.
Thanks,
kasper
Another possible option is, a friend owns an factory that produce 8 GM injection molded retainers. I may be able to give him either a CAD image or one of my plugs to manufacture this piece for me. But, I have the feeling it would raise the price of the piece beyond what I would like to see. I will look into this possability later in the week.
Expect to see the kevlar clips though, I believe they will be the most durable and keep the cost low.
Thanks,
kasper
| WRXnFX | 01-24-2002 07:21 AM |
Thanks for the update. Can't wait for pics and pricing. Winslow
| porkchop | 01-27-2002 05:24 PM |
bump!!!
| saewickson | 01-27-2002 07:04 PM |
News
Well it has returned again, so here is the latest. The kevlar clips will be on the production piece.
In related news, the pics should be posted up at the end of the week. I will then post them up and see what everyone thinks. The feedback from home area has been exceptionally positve. I am sorry for the delay, but it is a lot easier to copy a piece as opposed to doing an orignal build-up (which is what both pods are).
In unrelated news I have been kicking around this idea.....WhaT about a housing that fits over the steering column, that retains the hazards and house a boost controller slanted towards the driver for optimal viewing. Just an idea, let me know what you think.
Well, I hope everyone has a good week, thank you for your patience, and I will keep all of you updated.
kasper
In related news, the pics should be posted up at the end of the week. I will then post them up and see what everyone thinks. The feedback from home area has been exceptionally positve. I am sorry for the delay, but it is a lot easier to copy a piece as opposed to doing an orignal build-up (which is what both pods are).
In unrelated news I have been kicking around this idea.....WhaT about a housing that fits over the steering column, that retains the hazards and house a boost controller slanted towards the driver for optimal viewing. Just an idea, let me know what you think.
Well, I hope everyone has a good week, thank you for your patience, and I will keep all of you updated.
kasper
| Booster | 01-27-2002 09:05 PM |
I will buy a c/f defi style gauge pod for 52 mm gauges, the boost controller idea is awesome, I will buy one too if it fits the GReedy boost conrroller.
Please let me know when I can get a pod.
G:D
Please let me know when I can get a pod.
G:D
| postr | 01-27-2002 10:02 PM |
No pressure...
I'll probably get flamed for this, but some of us can't wait much longer...gotta have the gages so that we can do some other mods!
Maybe I'll just have to break down and buy a DeFi?
Maybe I'll just have to break down and buy a DeFi?
| Booster | 01-27-2002 10:35 PM |
I agree but I need the 52mm pod, Defi is 60mm.
G
G
| aspera | 01-27-2002 10:58 PM |
yep, mods waiting on mods.:)
| BlueCamel | 01-31-2002 04:22 PM |
bump
bump.
picts.. still waiting on picts.. must have picts... Can we get some picts please :)
I still am interested in a non-CF version for 3 gauges...
Did I meantion the though of seeing picts yet? :)
picts.. still waiting on picts.. must have picts... Can we get some picts please :)
I still am interested in a non-CF version for 3 gauges...
Did I meantion the though of seeing picts yet? :)
| saewickson | 01-31-2002 04:36 PM |
Friday or Saturday Pics
i will have the pics up friday or saturday, there has been a huge delay due to some problems that arose both with the pod and personal around here:
1. the clips presented a unique challenge
2. we changed material suppliers
3. we fitted the pod with a wide variation of gauges (to
make sure fit is accurate.
4. my partner's (and best firend) father died so stopped
everything for 4 days.
5 and this morning i dislocated my shoulder, but will go ahead
with regular activity (this is nothing new to me)
***I am not making exscuses for may actions only stating facts***
I am very sorry for the delay and any inconvenience this has created to any and all. I will try to make it up to all of you as best I can. Please feel free to send hate mail after Saturday if I have not posted up the pics yet. Things are just getting crazy, and I hope this has not jaded anyone towards us.
thanks and I am deeply sorry for any inconvinience,
kasper
1. the clips presented a unique challenge
2. we changed material suppliers
3. we fitted the pod with a wide variation of gauges (to
make sure fit is accurate.
4. my partner's (and best firend) father died so stopped
everything for 4 days.
5 and this morning i dislocated my shoulder, but will go ahead
with regular activity (this is nothing new to me)
***I am not making exscuses for may actions only stating facts***
I am very sorry for the delay and any inconvenience this has created to any and all. I will try to make it up to all of you as best I can. Please feel free to send hate mail after Saturday if I have not posted up the pics yet. Things are just getting crazy, and I hope this has not jaded anyone towards us.
thanks and I am deeply sorry for any inconvinience,
kasper
| jersey judge | 01-31-2002 04:48 PM |
Thanks for the work you/ve done so far. I'm very interested, depending on price and looks (isn't that always the case). I'm not going to whine about what's better or I'd like more till I see the product!!!
Ron
Ron
| porkchop | 01-31-2002 06:26 PM |
1 Attachment(s)
I think this will be worth the wait...
I have exchanged several emails with Kasper and he is a nice guy. He's been working hard on this trying to create a quality part. So it'll be worth it...
Keep up the good work Kasper!
Tommy
ps I think this is what it might look like....
I have exchanged several emails with Kasper and he is a nice guy. He's been working hard on this trying to create a quality part. So it'll be worth it...
Keep up the good work Kasper!
Tommy
ps I think this is what it might look like....
| Booster | 01-31-2002 07:41 PM |
Will it fit 52mm gauges? If so I will buy one.
thanks
G
thanks
G
| ExcelonX | 01-31-2002 07:56 PM |
It should face the driver and look like a clover in stead of 3 lumps allowing for 5 gauges!!!:D :D :D
| sherifx | 01-31-2002 08:21 PM |
[QUOTE][i]Originally posted by Booster [/i]
[B]Will it fit 52mm gauges? If so I will buy one.
thanks
G [/B][/QUOTE]
the whole purpose of this guage pod is to accomodate 52mm guages. The Defi' hood only fits 60's and is a whole inch taller then what Kasper is making, that is why there soo much interest in this guage pod.
sherif
[B]Will it fit 52mm gauges? If so I will buy one.
thanks
G [/B][/QUOTE]
the whole purpose of this guage pod is to accomodate 52mm guages. The Defi' hood only fits 60's and is a whole inch taller then what Kasper is making, that is why there soo much interest in this guage pod.
sherif
| Booster | 01-31-2002 08:34 PM |
Cool, I cant wait.:D
G
G
Không có nhận xét nào:
Đăng nhận xét