| Prosport Gauges | 10-20-2008 12:07 AM |
Glad to hear we are doing our job. Thank you all for your feedback.
| JDMbyBlood | 11-09-2008 08:22 PM |
When using the prosport oil pressure gauge, is it better going with the oil filter adapter plate. (I think that's what its called.) or the oil galley plug? Cons and pros to both? I know the plate is like $40.00 while the plug is like $12.00. Where does the oil galley plug install at? I think I read it goes somewhere under the Alternator?
Thanks....
Thanks....
| ohxietviet | 11-09-2008 09:21 PM |
oil filter adapter plate will not fit on the 06-07's :[
| joeyd02 | 11-09-2008 10:53 PM |
[QUOTE=ohxietviet;24401707]oil filter adapter plate will not fit on the 06-07's :[[/QUOTE]
I got a sadwich adapter plate from their site and it worked on MY07 STI
I got a sadwich adapter plate from their site and it worked on MY07 STI
| JDMbyBlood | 11-09-2008 11:08 PM |
How hard is it to install the oil galley plug if I go that route?
| DanWRX | 11-10-2008 12:15 AM |
Anyone else have the LEDs start to die in their gauges? My boost gauge had two corners (180 degrees apart) go out about 2 weeks before the 1 year mark since I bought mine and didn't bother with it since it wasn't too bad.. now 3 months later (1 year + 2 1/2 months after buying them) all four of my gauges have dead LEDs. So far only the white ones have gone out, the green ones are still all there but I do have them set to white in the daytime so they're on white 90% of the time when I drive. Makes it hard to read the gauges in the daytime :sadbanana:
Ryan - can anything be done to fix this short of buying all new gauges?
Ryan - can anything be done to fix this short of buying all new gauges?
| ryan_west06 | 11-10-2008 09:57 AM |
Dan- this is very strange, and a first for me. Can you send the gauges into me so i can test them for you. I know your past your 1 year mark but ill be happy to work with you :)
| AlxSti | 11-10-2008 10:02 AM |
just a quick question for those of you who mounted a premium series single gauge on your sterring column. where specifically did you wire the orange wire??
from what i remember (i installed mine over a year ago) i have wires going to the headlight switch and one to the clock. the way i wired it.. my gauge shuts down if i turn off the headlights or when i flick on the highs. i wanted it red with the lights on and white with the lights off. i leave my hids on all the time so its not a big deal.. but id still like to have it wired correctly.
from what i remember (i installed mine over a year ago) i have wires going to the headlight switch and one to the clock. the way i wired it.. my gauge shuts down if i turn off the headlights or when i flick on the highs. i wanted it red with the lights on and white with the lights off. i leave my hids on all the time so its not a big deal.. but id still like to have it wired correctly.
| ryan_west06 | 11-10-2008 02:22 PM |
here is a little video i made for you guys :) on installing
[url]http://www.youtube.com/watch?v=DB1rX0eksdI[/url]
[url]http://www.youtube.com/watch?v=DB1rX0eksdI[/url]
| jmilay | 11-25-2008 04:53 PM |
Pic from phone. Left Oil Pressure Premium. Right Boost Premium.
[IMG]http://www.milay.net/IMG_sm_0078.jpg[/IMG]
[IMG]http://www.milay.net/IMG_sm_0078.jpg[/IMG]
| ryan_west06 | 11-25-2008 04:54 PM |
Lookin Good! :)
| sigurd | 11-25-2008 05:11 PM |
more love for my prosport mechanical boost gauge.
reflashed the car this weekend and datalogged aswell. The gauge was dead nuts with the ecu on boost pressure.
reflashed the car this weekend and datalogged aswell. The gauge was dead nuts with the ecu on boost pressure.
| SubieWReX | 11-25-2008 10:31 PM |
Great boost gauge, but the high pitched beep in the opening ceremony is a bit much
| ryan_west06 | 11-26-2008 09:23 AM |
you know you can turn the beeping off :)
| Jncominco2 | 11-26-2008 10:14 AM |
i have a q ryan
im thinking of buying a little combo pack from import image on here that includes 3 gauges and an ATI pod
since its going through another vendor, do you guys still warranty it?
im thinking of buying a little combo pack from import image on here that includes 3 gauges and an ATI pod
since its going through another vendor, do you guys still warranty it?
| Chino Bling | 11-26-2008 10:31 AM |
i've got the 52mm white/green premium boost. and the regular oil psi and oil temp. all of my gages stopped working or are not working properly. my boost gauge reads irratically occasionally(needle jumps around in boost even if i'm in vaccum), as well as being way off. it'll say i'm at 29psi when it should really read 21psi. the oil pressure NEVER reads below 50psi. and the oil temp gage stopped lighting up and reading anything altogether. all of this in less than 1 year. needless to say, i'm shopping around for some new gages that i can depend on.
and before anyone says it...yes, i installed them properly.
just my .02
and before anyone says it...yes, i installed them properly.
just my .02
| joeyd02 | 11-26-2008 10:47 AM |
+ 1 ^^^ Well only 2 months after installing the only one that worked right is the boost. The boost still works though nd the only one I worry about. My EGT probe fell apart and my oil pressure just quit on me.
| Gray Ghost | 11-26-2008 10:50 AM |
my boost gauge reads irratically occasionally(needle jumps around in boost even if i'm in vaccum), as well as being way off. it'll say i'm at 29psi when it should really read 21psi.
My new premium boost gauge does this too. Under light or no load it will bounce around over 20 psi. Any ideas Ryan?
My new premium boost gauge does this too. Under light or no load it will bounce around over 20 psi. Any ideas Ryan?
| ryan_west06 | 11-26-2008 12:04 PM |
[quote=Jncominco2;24613002]i have a q ryan
im thinking of buying a little combo pack from import image on here that includes 3 gauges and an ATI pod
since its going through another vendor, do you guys still warranty it?[/quote]
Yes we still warranty them. Import image is one of our vendors. :)
im thinking of buying a little combo pack from import image on here that includes 3 gauges and an ATI pod
since its going through another vendor, do you guys still warranty it?[/quote]
Yes we still warranty them. Import image is one of our vendors. :)
| ryan_west06 | 11-26-2008 12:06 PM |
joeyd02 and gray ghost. Email me at [email][email�protected][/email] so i can help you and fix this problem please.
| joeyd02 | 11-26-2008 12:58 PM |
[QUOTE=ryan_west06;24614302]joeyd02 and gray ghost. Email me at [email][email�protected][/email] so i can help you and fix this problem please.[/QUOTE]
Well Ryan they were bought and installed over a year ago so no more warranty. I didnt have the time, due to me deploying shortly after, to deal with warranty so I had to rig the EGT probe to stay for the time being. It will be a few months untl I see my car again. The Oil pressure gauge stopped working so I replaced the sending unit and it worked for a week then quit again. I know alot of people have had success with these and my friend has yet to install his gauges in his RS.
Well Ryan they were bought and installed over a year ago so no more warranty. I didnt have the time, due to me deploying shortly after, to deal with warranty so I had to rig the EGT probe to stay for the time being. It will be a few months untl I see my car again. The Oil pressure gauge stopped working so I replaced the sending unit and it worked for a week then quit again. I know alot of people have had success with these and my friend has yet to install his gauges in his RS.
| DanWRX | 11-26-2008 01:24 PM |
[QUOTE=DanWRX;24403639]Anyone else have the LEDs start to die in their gauges? My boost gauge had two corners (180 degrees apart) go out about 2 weeks before the 1 year mark since I bought mine and didn't bother with it since it wasn't too bad.. now 3 months later (1 year + 2 1/2 months after buying them) all four of my gauges have dead LEDs. So far only the white ones have gone out, the green ones are still all there but I do have them set to white in the daytime so they're on white 90% of the time when I drive. Makes it hard to read the gauges in the daytime :sadbanana:
Ryan - can anything be done to fix this short of buying all new gauges?[/QUOTE]
An update on my situation, Ryan went out of his way to get me replacement gauges and now they're good as new! Regardless of what your problem is, let Ryan know because he might surprise you like he did for me :banana:
Ryan - can anything be done to fix this short of buying all new gauges?[/QUOTE]
An update on my situation, Ryan went out of his way to get me replacement gauges and now they're good as new! Regardless of what your problem is, let Ryan know because he might surprise you like he did for me :banana:
| Gray Ghost | 11-26-2008 02:46 PM |
[quote=DanWRX;24615399]An update on my situation, Ryan went out of his way to get me replacement gauges and now they're good as new! Regardless of what your problem is, let Ryan know because he might surprise you like he did for me :banana:[/quote]
+1 Prosport's customer service is truly awesome. The old adage you get what you pay for is partially true, but you can't put a price on excellent customer relations. Keep up the good work guys!
+1 Prosport's customer service is truly awesome. The old adage you get what you pay for is partially true, but you can't put a price on excellent customer relations. Keep up the good work guys!
| ryan_west06 | 11-28-2008 05:14 PM |
Thanks guys. Dan, dont forget u get a discount on our new wideband because of your honesty on the EGT gauge :) i should get it monday i suppose.
| ryan_west06 | 11-28-2008 05:16 PM |
[quote=joeyd02;24615017]Well Ryan they were bought and installed over a year ago so no more warranty. I didnt have the time, due to me deploying shortly after, to deal with warranty so I had to rig the EGT probe to stay for the time being. It will be a few months untl I see my car again. The Oil pressure gauge stopped working so I replaced the sending unit and it worked for a week then quit again. I know alot of people have had success with these and my friend has yet to install his gauges in his RS.[/quote]
Ill still be able to help you. Can you send in the senders to me so i can test them and replace them. since your warranty is up ill need you to cover the shipping to me and back to you.
Ill still be able to help you. Can you send in the senders to me so i can test them and replace them. since your warranty is up ill need you to cover the shipping to me and back to you.
| joeyd02 | 11-29-2008 01:32 AM |
[QUOTE=ryan_west06;24634587]Ill still be able to help you. Can you send in the senders to me so i can test them and replace them. since your warranty is up ill need you to cover the shipping to me and back to you.[/QUOTE]
Ryan,
Cool deal. I will try and get someone to send them in for me, but I can't promise that since my car is in storage. Otherwise I will send them in April once I finish my deployment.
Ryan,
Cool deal. I will try and get someone to send them in for me, but I can't promise that since my car is in storage. Otherwise I will send them in April once I finish my deployment.
| Prosport Gauges | 11-29-2008 08:24 AM |
ok, no problem.. stay safe.
| plmrass | 11-29-2008 09:42 AM |
[QUOTE=ryan_west06;24634578]Thanks guys. Dan, dont forget u get a discount on our new wideband because of your honesty on the EGT gauge :) i should get it monday i suppose.[/QUOTE]
Wheres this new wideband at?? Whats the deal with it?? Is this just as good as the innovative lc-1, or other widebands?? Any pros or cons to getting this wideband compared to others?? Thanks Jeff
Wheres this new wideband at?? Whats the deal with it?? Is this just as good as the innovative lc-1, or other widebands?? Any pros or cons to getting this wideband compared to others?? Thanks Jeff
| CynicX | 11-29-2008 10:36 AM |
My prosport oil pressure gauge doesnt do a full sweep at start up. The EGT and Boost do, but oil pressure goes right to 100ish and monitors without the full sweep....
Its not a big deal for me, and as long as it monitors actual oil pressure I dont plan on replacing it. Just wanted to let you know, maybe this is supposed to be like this or a common problem...
Its not a big deal for me, and as long as it monitors actual oil pressure I dont plan on replacing it. Just wanted to let you know, maybe this is supposed to be like this or a common problem...
| JDMbyBlood | 11-29-2008 01:36 PM |
[quote=plmrass;24639230]Wheres this new wideband at?? Whats the deal with it?? Is this just as good as the innovative lc-1, or other widebands?? Any pros or cons to getting this wideband compared to others?? Thanks Jeff[/quote]
Click here.>>> [URL="http://prosportgauges.com/wideband-air-fuel-ratio-kit.aspx"]Wideband[/URL]
Click here.>>> [URL="http://prosportgauges.com/wideband-air-fuel-ratio-kit.aspx"]Wideband[/URL]
| ryan_west06 | 11-29-2008 10:47 PM |
[quote=CynicX;24639518]My prosport oil pressure gauge doesnt do a full sweep at start up. The EGT and Boost do, but oil pressure goes right to 100ish and monitors without the full sweep....
Its not a big deal for me, and as long as it monitors actual oil pressure I dont plan on replacing it. Just wanted to let you know, maybe this is supposed to be like this or a common problem...[/quote]
Hmm, id have to test the gauge to see if its defective. did this randomly start? was it like this when you first got it?
Its not a big deal for me, and as long as it monitors actual oil pressure I dont plan on replacing it. Just wanted to let you know, maybe this is supposed to be like this or a common problem...[/quote]
Hmm, id have to test the gauge to see if its defective. did this randomly start? was it like this when you first got it?
| plmrass | 11-30-2008 09:01 AM |
Will the wideband be made only in a blue readout?? Is there a way to change the colors or will you be making others?? Thanks Jeff
| tsispyder97 | 11-30-2008 04:46 PM |
bad juju
went through 3 boost gauges til i settled on one that kinda reads zero
2 boost sensors
3 temp sensors
all in like 6 months
i sold em and bought defis
went through 3 boost gauges til i settled on one that kinda reads zero
2 boost sensors
3 temp sensors
all in like 6 months
i sold em and bought defis
| ryan_west06 | 12-01-2008 09:15 AM |
The wideband will only be in blue digital readout as of right now.
| ryan_west06 | 12-01-2008 09:16 AM |
[quote=tsispyder97;24649943]bad juju
went through 3 boost gauges til i settled on one that kinda reads zero
2 boost sensors
3 temp sensors
all in like 6 months
i sold em and bought defis[/quote]
Sorry you had problems with us. I cant imagine going through this many senders. :eek:
went through 3 boost gauges til i settled on one that kinda reads zero
2 boost sensors
3 temp sensors
all in like 6 months
i sold em and bought defis[/quote]
Sorry you had problems with us. I cant imagine going through this many senders. :eek:
| spaceywilly | 12-02-2008 09:03 PM |
I got a green/white mechanical boost gauge (non premium) and I'm really happy with it so far. One issue though, I think might be because of the way I wired it, but if I have my headlights on when I turn the car on the gauge will be white and it won't turn green unless I shut the car off again and start it with the headlights off, then turn the headlights on once the guage is on. As long as I turn the headlights off every time I turn the car off it works fine... could it be because I wired the gauge into the clock? I noticed the gauge turns on in the ACC position, but the rest of the gauge cluster doesn't come on until it's in the ON position...
| JSA | 12-02-2008 09:28 PM |
if you guys make an analog wideband...i would buy in a heart beat. I've had my prosports for 6 months...and not a single problem :)
| 96accord | 12-02-2008 09:42 PM |
My "T" adapter was bad out of the box. Bought the gauge Summer '07 and installed in Summer '08 (this yr) and when I installed the gauge it sounded like I had a flutter... Come to find out it was a bad "T" adapter.
See in the picture how the toothpick would not go through?
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2028.jpg[/IMG]
BUT other than that; I have had NO PROBLEMS!
A++
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2021.jpg[/IMG]
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2022.jpg[/IMG]
See in the picture how the toothpick would not go through?
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2028.jpg[/IMG]
BUT other than that; I have had NO PROBLEMS!
A++
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2021.jpg[/IMG]
[IMG]http://i25.photobucket.com/albums/c52/accordracin03/Subaru%20Pictures/Buffalo%20Wild%20Wings%20Meets/IMG_2022.jpg[/IMG]
| Turbo Sushi | 12-02-2008 10:33 PM |
i love mine too other then the piece of s auto meter clock pod i bought to bad i sold my clock i want to go to cups on top of the clock but all in all best stuff ever
| bwag | 12-02-2008 10:39 PM |
yup i have these gauges in my 240sx they work great and have never given me a problem
| 05Scooby | 12-02-2008 11:02 PM |
I've got a full set on the a pillar, green to match my gauge cluster,
1 thing I will warn you about with these gauges, they are very bright at night. I even left the lens protective cover on to try and diminish the brightness a little... I have Oil pressure, with the prosport remote mount kit, Boost (Electrical) and egt and I love em...
1 thing I will warn you about with these gauges, they are very bright at night. I even left the lens protective cover on to try and diminish the brightness a little... I have Oil pressure, with the prosport remote mount kit, Boost (Electrical) and egt and I love em...
| tsispyder97 | 12-03-2008 06:50 AM |
[QUOTE=ryan_west06;24656259]Sorry you had problems with us. I cant imagine going through this many senders. :eek:[/QUOTE]
yep really pissed me off. had a sensor go bad in the middle of a track session. thouhght something catastrophic had happened.....
it did, i didnt by my defis the first time
yep really pissed me off. had a sensor go bad in the middle of a track session. thouhght something catastrophic had happened.....
it did, i didnt by my defis the first time
| Jncominco2 | 12-03-2008 09:20 AM |
[quote=tsispyder97;24683780]yep really pissed me off. had a sensor go bad in the middle of a track session. thouhght something catastrophic had happened.....
it did, i didnt by my defis the first time[/quote]
oh SNAP!
uncalled for :unamused:
it did, i didnt by my defis the first time[/quote]
oh SNAP!
uncalled for :unamused:
| ryan_west06 | 12-03-2008 04:51 PM |
Guys we are always here to help. just have to call us :)
727-572-9011
Ryan
727-572-9011
Ryan
| mQumQu | 12-04-2008 07:49 PM |
[COLOR="SeaGreen"][B]Question :
anyone have this warning light on Oil press when u turn on the electronics only and not the engine on the vehicle?
it is annoying the hell out of me.[/B][/COLOR]
anyone have this warning light on Oil press when u turn on the electronics only and not the engine on the vehicle?
it is annoying the hell out of me.[/B][/COLOR]
| mQumQu | 12-04-2008 07:59 PM |
[COLOR="SeaGreen"]Also anyone know how to turn off that beeping sound. it is driving me nuts...
I have the premium series[/COLOR]
I have the premium series[/COLOR]
| DanWRX | 12-04-2008 08:17 PM |
[[email�protected]@u;24709134][COLOR="SeaGreen"][B]Question :
anyone have this warning light on Oil press when u turn on the electronics only and not the engine on the vehicle?
it is annoying the hell out of me.[/B][/COLOR][/QUOTE]
:lol: yes... it's because your car is off, so to the gauge, your oil pressure looks like it's 0psi which is exactly a time when you want the warning to be going off
[[email�protected]@u;24709268][COLOR="SeaGreen"]Also anyone know how to turn off that beeping sound. it is driving me nuts...
I have the premium series[/COLOR][/QUOTE]
[URL="http://letmegooglethatforyou.com/?q=prosport+turn+off+beeping"]Here's a nice tutorial[/URL]
anyone have this warning light on Oil press when u turn on the electronics only and not the engine on the vehicle?
it is annoying the hell out of me.[/B][/COLOR][/QUOTE]
:lol: yes... it's because your car is off, so to the gauge, your oil pressure looks like it's 0psi which is exactly a time when you want the warning to be going off
[[email�protected]@u;24709268][COLOR="SeaGreen"]Also anyone know how to turn off that beeping sound. it is driving me nuts...
I have the premium series[/COLOR][/QUOTE]
[URL="http://letmegooglethatforyou.com/?q=prosport+turn+off+beeping"]Here's a nice tutorial[/URL]
| mQumQu | 12-05-2008 07:08 AM |
[SIZE="4"][COLOR="Red"][B]Anyone with the PROSPORT PREMIUM serious have boost levels at 2psi?
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?[/B][/COLOR][/SIZE]
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?[/B][/COLOR][/SIZE]
| Prosport Gauges | 12-05-2008 09:14 AM |
[[email�protected]@u;24713870][SIZE="4"][COLOR="Red"][B]Anyone with the PROSPORT PREMIUM serious have boost levels at 2psi?
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?[/B][/COLOR][/SIZE][/QUOTE]
Are you saying your boost levels are off by 2 pis?
What is your oil pressure showing at a warm idle?
ryan
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?[/B][/COLOR][/SIZE][/QUOTE]
Are you saying your boost levels are off by 2 pis?
What is your oil pressure showing at a warm idle?
ryan
| evoeater8 | 12-05-2008 09:41 AM |
my boost gauge works perfect.... the peak and hold everything.. i'll be buying the oil pressure and egt real soon. My gauge is dead on 19.5 lbs of boost.
my only complaint is the screaching beep when it turns on.... i'd change that.. to a much lower comfirming beep.
but i like how you can just turn it off..LOL
my only complaint is the screaching beep when it turns on.... i'd change that.. to a much lower comfirming beep.
but i like how you can just turn it off..LOL
| Prosport Gauges | 12-05-2008 09:43 AM |
Here is how you turn the beeping off:
With the car off/engine off. Press and hold the button. Turn the car on and continue holding the button untill the opening ceremony is complete. Release button. no more beeping :) Repeat to turn back on.
Ryan
With the car off/engine off. Press and hold the button. Turn the car on and continue holding the button untill the opening ceremony is complete. Release button. no more beeping :) Repeat to turn back on.
Ryan
| mQumQu | 12-05-2008 03:29 PM |
[QUOTE]Originally Posted by [email�protected]@u
Anyone with the PROSPORT PREMIUM serious have boost levels at 2psi?
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?
Are you saying your boost levels are off by 2 pis?
What is your oil pressure showing at a warm idle?
ryan [/QUOTE]
[COLOR="Red"][B]Ya Boost sits at +2 to +3 psi
Oil Pressure idels after car warmed at 14psi-16psi[/B][/COLOR]
Anyone with the PROSPORT PREMIUM serious have boost levels at 2psi?
coz mine does and I have brought them back to the person that installed them and he cant figure out why other then the gauge itself...
everything was brand new.
He also mention to me that the oil Press reading is off by like 5-10psi...
anyone have the problem
or am i the unlucky one only?
Are you saying your boost levels are off by 2 pis?
What is your oil pressure showing at a warm idle?
ryan [/QUOTE]
[COLOR="Red"][B]Ya Boost sits at +2 to +3 psi
Oil Pressure idels after car warmed at 14psi-16psi[/B][/COLOR]
| ryan_west06 | 12-05-2008 03:59 PM |
[[email�protected]@u;24720109][COLOR=red][B]Ya Boost sits at +2 to +3 psi[/B][/COLOR]
[B][COLOR=red]Oil Pressure idels after car warmed at 14psi-16psi[/COLOR][/B][/quote]
Please call me first thing monday about this matter.
Glenn
[B][COLOR=red]Oil Pressure idels after car warmed at 14psi-16psi[/COLOR][/B][/quote]
Please call me first thing monday about this matter.
Glenn
| SoloSTI | 12-06-2008 01:58 AM |
My oil pressure gauge does the intial sweep and then stay stuck at 60 psi.
What could be wrong?
What could be wrong?
| Zspectrum | 12-06-2008 04:37 AM |
[quote=SoloSTI;24726341]My oil pressure gauge does the intial sweep and then stay stuck at 60 psi.
What could be wrong?[/quote]
I had a defi oil pressure gauge do that. Made me want to kill someone. Warranty ftw though.
What could be wrong?[/quote]
I had a defi oil pressure gauge do that. Made me want to kill someone. Warranty ftw though.
| mQumQu | 12-06-2008 08:39 AM |
[COLOR="Red"][SIZE="3"][B]Today, the Boost gauge is even worst,
It sits at 4psi when the engine is off.
it idels at -16psi.
and Max psi I reached was at 16 or 18 psi[/B][/SIZE][/COLOR]
It sits at 4psi when the engine is off.
it idels at -16psi.
and Max psi I reached was at 16 or 18 psi[/B][/SIZE][/COLOR]
| mQumQu | 12-06-2008 06:13 PM |
[B][COLOR="red"]One question
Is there a way to calibrate these gauges so I can reset the needle to 0 for boost[/COLOR][/B]
Is there a way to calibrate these gauges so I can reset the needle to 0 for boost[/COLOR][/B]
| MicMcKee | 12-06-2008 06:21 PM |
[quote=Prosport Gauges;24714821]Here is how you turn the beeping off:
With the car off/engine off. Press and hold the button. Turn the car on and continue holding the button untill the opening ceremony is complete. Release button. no more beeping :) Repeat to turn back on.
Ryan[/quote]
That turns off the 'beep' on ignition?
Or just the warning beep,
I've tried that and can't get it to stop beeping every time I start my car...
With the car off/engine off. Press and hold the button. Turn the car on and continue holding the button untill the opening ceremony is complete. Release button. no more beeping :) Repeat to turn back on.
Ryan[/quote]
That turns off the 'beep' on ignition?
Or just the warning beep,
I've tried that and can't get it to stop beeping every time I start my car...
| mQumQu | 12-11-2008 03:01 PM |
[COLOR="Red"][B]is there a number i can contact regarding the gauge itself.
My boost is idel at 4psi
and my oil press is at 12 psi now[/B][/COLOR]
My boost is idel at 4psi
and my oil press is at 12 psi now[/B][/COLOR]
| JDMbyBlood | 12-11-2008 06:09 PM |
[[email�protected]@u;24794171][COLOR=red][B]is there a number i can contact regarding the gauge itself.[/B][/COLOR]
[B][COLOR=red]My boost is idel at 4psi [/COLOR][/B]
[B][COLOR=red]and my oil press is at 12 psi now[/COLOR][/B][/quote]
[CENTER]Contact
[B]Prosport Gauges, Inc.[/B]
[B]11930 31st Court North[/B]
[B]St. Petersburg, FL 33716[/B]
[B](727) 572-9011[/B]
[B]M-F 9-5 EST[/B]
[B](727) 572-9012 Fax[/B]
Email
[EMAIL="[email�protected]?subject=Prosport Gauges Question"][email�protected][/EMAIL][/CENTER]
[B][COLOR=red]My boost is idel at 4psi [/COLOR][/B]
[B][COLOR=red]and my oil press is at 12 psi now[/COLOR][/B][/quote]
[CENTER]Contact
[B]Prosport Gauges, Inc.[/B]
[B]11930 31st Court North[/B]
[B]St. Petersburg, FL 33716[/B]
[B](727) 572-9011[/B]
[B]M-F 9-5 EST[/B]
[B](727) 572-9012 Fax[/B]
[EMAIL="[email�protected]?subject=Prosport Gauges Question"][email�protected][/EMAIL][/CENTER]
Không có nhận xét nào:
Đăng nhận xét