| ejicon | 11-18-2000 12:23 AM |
I'd be in, but you live in Texas... me in LA.. sux.. =P
| Bankheist | 11-18-2000 12:26 AM |
Ejicon,
what does you living in LA have to do with it??? The stuff and detailed instructions will be mailed to you...
*confused now*
Are you clear on this now
-Kevin
what does you living in LA have to do with it??? The stuff and detailed instructions will be mailed to you...
*confused now*
Are you clear on this now
-Kevin
| 8Complex | 11-18-2000 12:31 AM |
I think you should post the instructions up here. Personally I wouldn't want to go tearing into my dash cluster unless I knew exactly what I was doing...
| Bankheist | 11-18-2000 12:45 AM |
This is from Matthew Nelson (thanks for the PM man!)
[quote]Hey, Kevin -
First, I'd like to congratulate you on your effort. I've been praying somebody would figure this modification out sooner or later.
I do have a couple of questions, though.
1) How much time is required for the install? Usually, the difficulty of the install can be translated into an amount of time. Are we talking about a half-hour to accomplish this, or two hours, or more? [/quote]
30 minutes to 45 minutes....its not hard... you just have to be gentle, and carefull..take your time...its very delicate behind that glass!
[quote]
2) Why is it not possible to change the illumination color of the clock? Is the clock a separate unit with its own display? Is it possible to replace the clock (or just remove it altogether) so that the display isn't almost all blue with a green clock display?
[/quote] the clock's led IS green wheras the ODO and the gauges are white light with a green filter over it... you can remove the clock... I wouldnt advise it unless you could cover up the hole without noticing... im sure if you took you dash to the right store..they might no of someone who makes a different colored clock... but i cant change the color using filter alone [img]http://www.i-club.com/ubb-files/smile.gif[/img]
[quote]
3) How did you accomplish the blue lighting? I've been following some of your previous posts, and it seems that there is a filter mounted to the back of the display that "cleans" all of the wavelengths of light except for green. Would it not be possible, with further experimentation, to find a way to change the illumination to colors such as red, etc?[/quote]
well the color is hard enough to get... I have to use 2 sheets of blue per gauge to get it that blue... one sheet looks like aqua...cool, but not cool enough for me. you have to remember... no matter what.. you are still dealing with that green filter... no way to fight it... if someone came up with a way to make red...it would be cool...but i don't if i would like red to go with the red gauges... might be overkill you know?
[quote]
4) Finally, what's the cost of this entire setup going to be? When I say "entire setup," I'm referring to the blue gauge display behind the steering wheel, blue climate controls, blue everything! Does this include such things as the hazard lamps button, foglamp button, etc.? Is there a way to do this?[/quote]
it will be $15 for speedometer, tach, odo, gas/temp and A/C.... I really don't like my A/c design... I really and honestly dont want to sell it... I think it's gettho... but it turns out to look really good!!! but the premise behind it is very simple!!!
The buttons... well I was thinking about doing that... It will probably not be much of a problem, its just now that I have about 50 orders to deal with here... its gonna be a pain to do those buttons... if demand is high enough... I'll research whether or not you can do it...
Well, if you guys have anymore questions... try and PM me if you can..
Thanks you very much for all the interest you have shown here.
-Kevin
[quote]Hey, Kevin -
First, I'd like to congratulate you on your effort. I've been praying somebody would figure this modification out sooner or later.
I do have a couple of questions, though.
1) How much time is required for the install? Usually, the difficulty of the install can be translated into an amount of time. Are we talking about a half-hour to accomplish this, or two hours, or more? [/quote]
30 minutes to 45 minutes....its not hard... you just have to be gentle, and carefull..take your time...its very delicate behind that glass!
[quote]
2) Why is it not possible to change the illumination color of the clock? Is the clock a separate unit with its own display? Is it possible to replace the clock (or just remove it altogether) so that the display isn't almost all blue with a green clock display?
[/quote] the clock's led IS green wheras the ODO and the gauges are white light with a green filter over it... you can remove the clock... I wouldnt advise it unless you could cover up the hole without noticing... im sure if you took you dash to the right store..they might no of someone who makes a different colored clock... but i cant change the color using filter alone [img]http://www.i-club.com/ubb-files/smile.gif[/img]
[quote]
3) How did you accomplish the blue lighting? I've been following some of your previous posts, and it seems that there is a filter mounted to the back of the display that "cleans" all of the wavelengths of light except for green. Would it not be possible, with further experimentation, to find a way to change the illumination to colors such as red, etc?[/quote]
well the color is hard enough to get... I have to use 2 sheets of blue per gauge to get it that blue... one sheet looks like aqua...cool, but not cool enough for me. you have to remember... no matter what.. you are still dealing with that green filter... no way to fight it... if someone came up with a way to make red...it would be cool...but i don't if i would like red to go with the red gauges... might be overkill you know?
[quote]
4) Finally, what's the cost of this entire setup going to be? When I say "entire setup," I'm referring to the blue gauge display behind the steering wheel, blue climate controls, blue everything! Does this include such things as the hazard lamps button, foglamp button, etc.? Is there a way to do this?[/quote]
it will be $15 for speedometer, tach, odo, gas/temp and A/C.... I really don't like my A/c design... I really and honestly dont want to sell it... I think it's gettho... but it turns out to look really good!!! but the premise behind it is very simple!!!
The buttons... well I was thinking about doing that... It will probably not be much of a problem, its just now that I have about 50 orders to deal with here... its gonna be a pain to do those buttons... if demand is high enough... I'll research whether or not you can do it...
Well, if you guys have anymore questions... try and PM me if you can..
Thanks you very much for all the interest you have shown here.
-Kevin
| bender | 11-18-2000 05:50 AM |
i'd like on too. from canada, is that a problem?
| GS116 | 11-18-2000 08:25 AM |
I like to be in too!!!
And I saw that in Vancouver, Canada, we ahve so far 4 people, maybe you can send all 4 to one of us, maybe can save you a bit of shipping!
And I saw that in Vancouver, Canada, we ahve so far 4 people, maybe you can send all 4 to one of us, maybe can save you a bit of shipping!
| Bankheist | 11-18-2000 11:02 AM |
Check this out!
To all who have posted saying "I'M IN" Or the equivilant to that...please check your PM's
-Kevin
To all who have posted saying "I'M IN" Or the equivilant to that...please check your PM's
-Kevin
| Drifter | 11-18-2000 09:18 PM |
I'm in =)
| prezios | 11-19-2000 04:11 AM |
Count me in for $15 I wish I saw this post sooner.
| Bankheist | 11-19-2000 10:15 AM |
CHECK YOUR PM's EVERYONE....
There is good news inside of each and everyone of them [img]http://www.i-club.com/ubb-files/smile.gif[/img]
Maybe even a Scooby Snack too! Ha Ha
-Kevin
There is good news inside of each and everyone of them [img]http://www.i-club.com/ubb-files/smile.gif[/img]
Maybe even a Scooby Snack too! Ha Ha
-Kevin
| hoodwho | 11-19-2000 01:45 PM |
IN
am i too late?
i'm diggin the blue!
am i too late?
i'm diggin the blue!
| LongIsland RS | 11-19-2000 02:53 PM |
I'm in, as long as you can give me everything i need to change the instrument cluster and the heater controls as well, with instructions.
I wouldn't want one set of lights blue and the others green, if you know what i mean.
I wouldn't want one set of lights blue and the others green, if you know what i mean.
| bruno | 11-19-2000 04:43 PM |
im in
how do i get these
how do i get these
| munkis | 11-19-2000 05:53 PM |
Just PayPalled the money to Bankhiest, cant wait for my blue guages and a/c controls. Keep up the good work Kevin. This is a great price. Order them up guys! If your lazy like me I know you dont want to be going out getting supplies and cutting and all that. You cant beat this deal.
Jay McDade
MY00 BRP RS Coupe
Auto Tech
Jay McDade
MY00 BRP RS Coupe
Auto Tech
| Bankheist | 11-19-2000 07:09 PM |
Thanks for the support Jay...
Thats right everyone! I'm taking orders on my paypal account the address is [email protected]
Be sure to send you mailing info as well...If you have further questions, please ask!
If you'd like to send a money order, IM me for my address
thanks everyone!
-Kevin
Thats right everyone! I'm taking orders on my paypal account the address is [email protected]
Be sure to send you mailing info as well...If you have further questions, please ask!
If you'd like to send a money order, IM me for my address
thanks everyone!
-Kevin
| wrxman555 | 11-19-2000 07:57 PM |
Hey Buddy- I want the Gauges and climate Blue Backgrounds. Are you charging more for Both or 15 inc shipping for Both? I am IN either way. PM me! Elliott***
| Bankheist | 11-19-2000 08:15 PM |
Elliot, and everyone
It's $15 for the instrument panel... but since in my opinion the climate gagues are ghetto in design but perfect in what it accomplishes...I'm giving it away for free.
I guess I'm generous. HA HA
-Kevin
It's $15 for the instrument panel... but since in my opinion the climate gagues are ghetto in design but perfect in what it accomplishes...I'm giving it away for free.
I guess I'm generous. HA HA
-Kevin
| Velocity | 11-19-2000 08:39 PM |
I don't suppose the Legacy gauges are the same as the Impreza gauges, are they? I mean, other than the fact that the RS ones are white, and my GT's are black... [img]http://www.i-club.com/ubb-files/frown.gif[/img] Hell, I wonder if I could swap them out?
Anyhow, does anyone forsee any reasons that this wouldn't work on my GT? I mean, I'd probably have to cut out a different design (unless somebody wants me to pay them to do it for me. Heh heh), but otherwise, can I expect similar results?
Thanks
Anyhow, does anyone forsee any reasons that this wouldn't work on my GT? I mean, I'd probably have to cut out a different design (unless somebody wants me to pay them to do it for me. Heh heh), but otherwise, can I expect similar results?
Thanks
| Bankheist | 11-19-2000 08:47 PM |
hey if its made out of that same green stuff. sure you can turn it to blue...no probs... git me apic of the GT's interior and I'll see what i can do with it
-Kevin
-Kevin
| BigElm | 11-19-2000 09:26 PM |
Damn Bank'...you're on fire kid..... [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| LongIsland RS | 11-19-2000 09:29 PM |
I noticed in your pic that the zero on the tach is still green....as well as somewhere around the middle of your gas gauge? Why is that, and do you have some clearer pics and pics of the climate control too?
| Bankheist | 11-19-2000 09:43 PM |
Damn, you got a good eye!!! those pics are of version 1...which failed!
Version two is the same color...but much better!!! Good eye man, you work for the police or something?
-Kevin
Version two is the same color...but much better!!! Good eye man, you work for the police or something?
-Kevin
| BigElm | 11-19-2000 09:55 PM |
Oh Bank' pleasseeee!!!
Since you were emphasizing so much that is was your "Version I" mod...that's why nobody jumped down your throat...hehehehhe [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Since you were emphasizing so much that is was your "Version I" mod...that's why nobody jumped down your throat...hehehehhe [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| Bankheist | 11-19-2000 10:05 PM |
Thanks Elm... i think you were complimenting me [img]http://www.i-club.com/ubb-files/smile.gif[/img] thanks [img]http://www.i-club.com/ubb-files/smile.gif[/img] so how's you're phone buy coming along? I'll still take that battery off of ya... no charge [img]http://www.i-club.com/ubb-files/smile.gif[/img]
Kevin
Kevin
| Reiflex | 11-20-2000 12:12 AM |
Bank,
this is a question about the PM you gave me...
[quote]Reflex!!!!!
[url="http://www.i-club.com/ubb-files/Forum26/HTML/000297.html"]http://www.i-club.com/ubb-files/Forum26/HTML/000297.html[/url]
Don't start selling that ****!!! I'm sure it works, but heres the catch... most likely your gauges are ****ed up! Mine are! Subaru is ordering me a new one...
[/quote]
Your ver 1 or the process Warped you gauge face and caused you needle not to work properly. Do you know what caused it, and or what you did to correct it in ver II.
When I was developing my mod (I'm sure must be simmilar to yours) I never ran into this problem at all and couldn't figure out how it could happen. In the development phase I went as far as removing the needles & gauge face, and my needle still work perfectly.
The mod I've done is proven and installed on other RS's other than mine with no problems at all. ( and I'm only what I've done only becuase I don't know all the details of your, but I'm sure both our mods are almost totaly identical)
When I've personally shown other how to do and they too just scratch there head trying to figure out why you think it wouldn't work and how you messed up your needle in the 1st place. You've mention that at 1st you use two layers, but it would take up to 5 layers to even get close to displacing the gauge face.
So, What happen with yours is it any differnet from the way I did it? You can check my current post were I've layed out everything I've done or found.
Please don't take this as a flame, I'm all about technical information that I hope helps others [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
[i] hey that's kinda cool that the board automaticaly cleans up the harsh language, i like it.[/i]
[This message has been edited by Reiflex (edited November 20, 2000).]
[This message has been edited by Reiflex (edited November 20, 2000).]
this is a question about the PM you gave me...
[quote]Reflex!!!!!
[url="http://www.i-club.com/ubb-files/Forum26/HTML/000297.html"]http://www.i-club.com/ubb-files/Forum26/HTML/000297.html[/url]
Don't start selling that ****!!! I'm sure it works, but heres the catch... most likely your gauges are ****ed up! Mine are! Subaru is ordering me a new one...
[/quote]
Your ver 1 or the process Warped you gauge face and caused you needle not to work properly. Do you know what caused it, and or what you did to correct it in ver II.
When I was developing my mod (I'm sure must be simmilar to yours) I never ran into this problem at all and couldn't figure out how it could happen. In the development phase I went as far as removing the needles & gauge face, and my needle still work perfectly.
The mod I've done is proven and installed on other RS's other than mine with no problems at all. ( and I'm only what I've done only becuase I don't know all the details of your, but I'm sure both our mods are almost totaly identical)
When I've personally shown other how to do and they too just scratch there head trying to figure out why you think it wouldn't work and how you messed up your needle in the 1st place. You've mention that at 1st you use two layers, but it would take up to 5 layers to even get close to displacing the gauge face.
So, What happen with yours is it any differnet from the way I did it? You can check my current post were I've layed out everything I've done or found.
Please don't take this as a flame, I'm all about technical information that I hope helps others [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
[i] hey that's kinda cool that the board automaticaly cleans up the harsh language, i like it.[/i]
[This message has been edited by Reiflex (edited November 20, 2000).]
[This message has been edited by Reiflex (edited November 20, 2000).]
| Andrew | 11-20-2000 12:14 AM |
Hey guys, quick question..I was showing my friend the blue gauges and he was wondering if its possible to do it to his car as well ('96 MR2). Could he do it to his car with the same method as you guys are doing it? Thanks for the info guys, greatly appreciate it.
| Reiflex | 11-20-2000 12:30 AM |
BTW
Currently I am not 'Selling' the mod.
I'm giving it away free and installing (well actualy I just show them an let them do the install work since it so easy [img]http://www.i-club.com/ubb-files/wink.gif[/img] ) for local folks and for people out side the area or state, I'm just ask they cover shipping (ground,next day air, whatever)
Andrew,
It all depends on how your friend instument panel was designed to have the color it has, Film based, Bulb based, ect. The only way to tell is do like we did, have a go at it.
If anyone else is wanting some tech details about the mod or have additional ideas there's is a post about How to do this mod. ( I'm sure that both mods that Bank & I offer/showing are praticaly the same, but bank can confim how they are different if they are) Soon I'll adding in how to get to the instument panel.
[This message has been edited by Reiflex (edited November 20, 2000).]
Currently I am not 'Selling' the mod.
I'm giving it away free and installing (well actualy I just show them an let them do the install work since it so easy [img]http://www.i-club.com/ubb-files/wink.gif[/img] ) for local folks and for people out side the area or state, I'm just ask they cover shipping (ground,next day air, whatever)
Andrew,
It all depends on how your friend instument panel was designed to have the color it has, Film based, Bulb based, ect. The only way to tell is do like we did, have a go at it.
If anyone else is wanting some tech details about the mod or have additional ideas there's is a post about How to do this mod. ( I'm sure that both mods that Bank & I offer/showing are praticaly the same, but bank can confim how they are different if they are) Soon I'll adding in how to get to the instument panel.
[This message has been edited by Reiflex (edited November 20, 2000).]
| Bankheist | 11-20-2000 05:53 AM |
Reiflex, since I am about to go to class in a second... I really don't have time to go into full discussion about the mod, lets put it this way. The needles arent a problem any longer.
Also, I would prefer that if you are directly speaking to me in a post, that you simply PM me, thats what the PM function is for. I'll write again in about 3 hours when I get to my desk at work.... what am I supposed to do? WORK? ha ha!
Andrew, I'll respond to your I'm as soon as I get in. Thanks for the business buddy.
Talk to everyone in a couple hours...
-Kevin
Also, I would prefer that if you are directly speaking to me in a post, that you simply PM me, thats what the PM function is for. I'll write again in about 3 hours when I get to my desk at work.... what am I supposed to do? WORK? ha ha!
Andrew, I'll respond to your I'm as soon as I get in. Thanks for the business buddy.
Talk to everyone in a couple hours...
-Kevin
| Bankheist | 11-20-2000 09:25 AM |
I know what caused it... it was the design rubbing on the needles and the fact that my piece was to large to smoothly slide behind the gauges.... your piece is basically the same design as my version one... so how u smoothly get it in there...beats me... thats why I made my version 2, which is a whole lot easier.
Personnally I want this bickering to to stop, im really tired of it.. you can sell your knowledge or people can buy from me... it all depends on what the consumer wants. If the consumer is like me... he/she wont want to go thru the tedious process of getting the cut just right (I know you know what I'm talking about), they wont have to go searching for the right material to use. Just simply recieving everything they need to use in the mail from me.
So can we make an end to this?
-Kevin
Personnally I want this bickering to to stop, im really tired of it.. you can sell your knowledge or people can buy from me... it all depends on what the consumer wants. If the consumer is like me... he/she wont want to go thru the tedious process of getting the cut just right (I know you know what I'm talking about), they wont have to go searching for the right material to use. Just simply recieving everything they need to use in the mail from me.
So can we make an end to this?
-Kevin
| hoodwho | 11-21-2000 12:04 AM |
I agree. Its not that i cant go and figure this out. i dont want to. I have other thing to do with my car besides pretty lights, i do like it though so i'll spend the WHOLE $15 bucks (materials & shipping) to make it that much quicker, so i can finish my stereo!
(much more fun, AND easier for ME.) thats why other people pay for car audio installs, the dont want to do it, or cant. I can, so Ill do THAT myself.
thank you both for the efforts!
Kev watch for my check.
HoodWho?
[This message has been edited by hoodwho (edited November 21, 2000).]
(much more fun, AND easier for ME.) thats why other people pay for car audio installs, the dont want to do it, or cant. I can, so Ill do THAT myself.
thank you both for the efforts!
Kev watch for my check.
HoodWho?
[This message has been edited by hoodwho (edited November 21, 2000).]
| omahasubaru | 11-21-2000 05:12 AM |
Kevin... did you get my money via PayPal.
Thanks
Thanks
| Bankheist | 11-21-2000 06:10 AM |
HoodWho, im watching for it...thanks!!! If its a personal check... I'm gonna sit on it a couple days before cashing it.
-Kevin
[This message has been edited by Bankheist (edited November 21, 2000).]
-Kevin
[This message has been edited by Bankheist (edited November 21, 2000).]
| Bankheist | 11-21-2000 06:21 AM |
Since my announcemnt of my gauges going on sale was on the last page, I feel as though I should re-announce here on page 3 (right here...right now...."love that fat-boy beat")
My blue gauge conversion is being sold for US$15.00 this include shipping, handling, gauge pack, A/C pack, an invoice sheet, and 2 pages of install instructions (very detailed...step by step)
I will accept payment via paypal at [email protected]
Or, I will accept money orders or personal checks (pending clearing of course) at my home address:
Kevin Heist
5017 Blanco Dr.
Haltom City, TX 76137
Canadian resients: if you dont want to get a US money order due to exchange rates and you happen to have US currency lying around.. I'll accept that as a form of payment also.
Please be sure to put your mailing address down when you transfer via paypal or PM me with it.
If you have any futher questions... please, do not hesitate to ask!
Thanks everyone, looking forward to doing business with you!
-Kevin Heist
-Bankheist
My blue gauge conversion is being sold for US$15.00 this include shipping, handling, gauge pack, A/C pack, an invoice sheet, and 2 pages of install instructions (very detailed...step by step)
I will accept payment via paypal at [email protected]
Or, I will accept money orders or personal checks (pending clearing of course) at my home address:
Kevin Heist
5017 Blanco Dr.
Haltom City, TX 76137
Canadian resients: if you dont want to get a US money order due to exchange rates and you happen to have US currency lying around.. I'll accept that as a form of payment also.
Please be sure to put your mailing address down when you transfer via paypal or PM me with it.
If you have any futher questions... please, do not hesitate to ask!
Thanks everyone, looking forward to doing business with you!
-Kevin Heist
-Bankheist
| BigElm | 11-21-2000 08:03 AM |
Yo Bank'...
I PM'd you and I already sold the phone...sorry.
I PM'd you and I already sold the phone...sorry.
| Chris F | 11-21-2000 11:57 AM |
Kevin stopped by today and let me check out the lights. Let me just say they look sooooo much better in person than in the pictures. The mod looks great and all the gauges work-an important feature! Check them out guys, they are very cool!!
Just my 2c
Chris F
Just my 2c
Chris F
| Trey | 11-21-2000 03:18 PM |
Yeah, agreed. I saw them in person and they are very nice. If I hadn't already installed green-lit GReddy gauges throughout my interior, I would have jumped on a kit myself. Gotta stay color-coordinated, right? [img]http://www.i-club.com/ubb-files/wink.gif[/img]
Cheers,
Trey
CobbTuning.com
Cheers,
Trey
CobbTuning.com
| Vitamin-K | 11-21-2000 07:37 PM |
oohh, i know im a little late on this one but,
ININININININININ!!!
IN!
Where in texas are ya? im in San antonio. That is gunna look SOO pimp! Perfect!
Thanks.
lates,
kevin
ININININININININ!!!
IN!
Where in texas are ya? im in San antonio. That is gunna look SOO pimp! Perfect!
Thanks.
lates,
kevin
| PiGi | 11-22-2000 12:07 AM |
I am in too ar!!
If I am paying u by US dollars(I am in
Canada), can I just mail to u or?!
If I am paying u by US dollars(I am in
Canada), can I just mail to u or?!
| Matt | 11-22-2000 12:14 AM |
Wow, talk about alot of replys.
I went today and took a look at Kevin's mod and it looks really good. Doesn't look or sound too hard to do if you are careful and it does change the way the dash looks in the dark.
And when was the last thing you did to your RS that cost only $15 ? Heck, a tank of gas costs more than that.
I went today and took a look at Kevin's mod and it looks really good. Doesn't look or sound too hard to do if you are careful and it does change the way the dash looks in the dark.
And when was the last thing you did to your RS that cost only $15 ? Heck, a tank of gas costs more than that.
| JZ oo7 | 11-22-2000 12:33 AM |
i'm in, but check your PM.
JZ
JZ
| Bankheist | 11-23-2000 07:47 AM |
I have received a number of questions regarding the Automatice shifter's back lit area....
I will be happy to provide everyone with some extra material... but I need to roughly figure out what kinda dimensions I am dealing with... know what I am saying?
Please let me know soon.
-Kevin
I will be happy to provide everyone with some extra material... but I need to roughly figure out what kinda dimensions I am dealing with... know what I am saying?
Please let me know soon.
-Kevin
| 98RS | 11-23-2000 11:31 AM |
hey-i just sent the money to you via paypal, hope to get it soon.
thanks for all the help
Peace-
Ian
98RS
thanks for all the help
Peace-
Ian
98RS
| munkis | 11-23-2000 06:08 PM |
Kevin looks like your doing well. How about a list of the peeps you have recieved money from, this way they dont have to keep asking you....like me, you got mine right ehehe.
Keep it up!
Cant wait for the blue gauges!
Jay McDade
MY00 BRP RS coupe
Keep it up!
Cant wait for the blue gauges!
Jay McDade
MY00 BRP RS coupe
| Bankheist | 11-23-2000 07:04 PM |
here's the list of who's paid: In order of when I received money from the party. Which means thats who will get the orders first.
BY I CLUB NAME:
JGard18
Chung
Eric Bibler ... dont have your screenname
brivaken
Fong Her .... i dont have your screenname
Andrew
giulio
prezios
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
thats everyone who has paid via paypal
Money orders sent:
chuckles... u sent a check
Kilalee
jagcars26
Turk
WRX oo7
and I have a group money order coming from 20 people in Vancouver, BC you guys know who u are :P
BY I CLUB NAME:
JGard18
Chung
Eric Bibler ... dont have your screenname
brivaken
Fong Her .... i dont have your screenname
Andrew
giulio
prezios
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
thats everyone who has paid via paypal
Money orders sent:
chuckles... u sent a check
Kilalee
jagcars26
Turk
WRX oo7
and I have a group money order coming from 20 people in Vancouver, BC you guys know who u are :P
| Bankheist | 11-25-2000 12:34 AM |
The following will have their gauges shipped out monday morning!
JGard18
Chung
Eric Bibler ... dont have your screenname
brivaken
Fong Her .... i dont have your screenname
Andrew
giulio
prezios
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
Vancouver...cant wait to finish the "Largest group buy from anyone city" !!! Toronto, keep 'em coming in!
If you have questions... Please dont hesitate to ask!
-Kevin
JGard18
Chung
Eric Bibler ... dont have your screenname
brivaken
Fong Her .... i dont have your screenname
Andrew
giulio
prezios
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
Vancouver...cant wait to finish the "Largest group buy from anyone city" !!! Toronto, keep 'em coming in!
If you have questions... Please dont hesitate to ask!
-Kevin
| BigElm | 11-25-2000 08:28 PM |
HEY....
Ok Bank'...where the h*ll is my name????????
I don't want to start getting postal...
[img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net5/uzi.gif[/img] Bank' [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Ok Bank'...where the h*ll is my name????????
I don't want to start getting postal...
[img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net5/uzi.gif[/img] Bank' [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| Bankheist | 11-25-2000 08:40 PM |
Elm...I'm going postal on your ass! Remember... you're a special order???? "special" did you ride the small school bus when you were little???
HA HA HA!
HA HA HA!
| BigElm | 11-25-2000 09:00 PM |
As a matter of fact...I never got on the damn school bus when I was little. I lived 4 blocks from school.
But just for that comment...it's on...
[img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net7/imulandmine.gif[/img] [img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net6/rocketq3.gif[/img]
[This message has been edited by BigElm (edited November 25, 2000).]
[This message has been edited by BigElm (edited November 25, 2000).]
But just for that comment...it's on...
[img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net7/imulandmine.gif[/img] [img]http://cgi.tripod.com/smilecwm/cgi-bin/s/net6/rocketq3.gif[/img]
[This message has been edited by BigElm (edited November 25, 2000).]
[This message has been edited by BigElm (edited November 25, 2000).]
| EX500R | 11-25-2000 10:15 PM |
I'm in, they look bitchin'
Sebastian
Sebastian
| Bankheist | 11-26-2000 02:10 PM |
EX500R (and anyone else)
If you would like a gauge pack... I am now currently in full production... I'm producing about 10 a night. If you would like to order a pack... please send US$15 to my paypal account at [email protected] of send a check or money order to:
Kevin Heist
5017 Blanco Dr.
Haltom City, TX 76137
on personal checks I will wait until they have cleared the bank.
If you have any questions... ask me [img]http://www.i-club.com/ubb-files/smile.gif[/img] I'll be happy to answer them!
Thank you once again everyone and keep up the contiuning support!
-Kevin
If you would like a gauge pack... I am now currently in full production... I'm producing about 10 a night. If you would like to order a pack... please send US$15 to my paypal account at [email protected] of send a check or money order to:
Kevin Heist
5017 Blanco Dr.
Haltom City, TX 76137
on personal checks I will wait until they have cleared the bank.
If you have any questions... ask me [img]http://www.i-club.com/ubb-files/smile.gif[/img] I'll be happy to answer them!
Thank you once again everyone and keep up the contiuning support!
-Kevin
| omahasubaru | 11-26-2000 04:54 PM |
How are you shipping them and what is the ETA for these kits?
| Bankheist | 11-26-2000 06:55 PM |
Jon, I'm sending out 21 orders tomorrow morning. 1st class USPS so I would hope that everyone gets them before this coming weekend [img]http://www.i-club.com/ubb-files/smile.gif[/img] If you want faster shipping.. well I dunno [img]http://www.i-club.com/ubb-files/smile.gif[/img]
-Kevin
Gimme some suggestions [img]http://www.i-club.com/ubb-files/smile.gif[/img]
-Kevin
Gimme some suggestions [img]http://www.i-club.com/ubb-files/smile.gif[/img]
| tomrichardson | 11-26-2000 09:10 PM |
I can't wait! I'll let you know how it goes!
Later,
Tom Richardson, Jr.
Later,
Tom Richardson, Jr.
| jdOgg3355 | 11-26-2000 10:12 PM |
Count me in for all the blue you can get me. This is gonna look sweet on my car. "I'm blue da-ba-dee-da-ba-die. If I send you my payment in the next couple of days, where would I be on your list...(estimation of when you could send them)
Thanks
Jay [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
Thanks
Jay [img]http://www.i-club.com/ubb-files/biggrin.gif[/img]
| Otaku64 | 11-26-2000 10:21 PM |
i am most definitely in...
salvatore
salvatore
| Bankheist | 11-26-2000 11:27 PM |
Hey everyone, I have my first 21 orders ready to head out tomorrow AM... When I originally said 50...I was wrong...dont worry about it! I'll have this stuff in stock!
Also... the turn around usually goes like this... If I get your order before 5PM (Central) on a given day, I can usually have it shipped out the next day. Beware though.... I have a group buy of over 30 orders comming in from Vancouver and at least another 15 from Toronto .... I am stepping up production as we speak!
Once agan if you don't know where to send your money... contact me, or scroll up I have posted the transaction info a couple times.
If you have any further questions... please contact me!
Thank you all for your business!
-Kevin
Onve again please send
Also... the turn around usually goes like this... If I get your order before 5PM (Central) on a given day, I can usually have it shipped out the next day. Beware though.... I have a group buy of over 30 orders comming in from Vancouver and at least another 15 from Toronto .... I am stepping up production as we speak!
Once agan if you don't know where to send your money... contact me, or scroll up I have posted the transaction info a couple times.
If you have any further questions... please contact me!
Thank you all for your business!
-Kevin
Onve again please send
| Bankheist | 11-27-2000 06:22 PM |
Hey everyone!
prezios
giulio
Andrew
brivakn
Chung
JGard18
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
jagcars26
Turk
All were shipped out today.
Jesta C: payment and address received today... will ship tomorrow morning.
hoodwho: check received saturday...will ship wednesday morning.
chuckles: check received today..will ship out thursday morning
Otaku64, jdOgg3355, EX500R, Vitamin-K, are you guys gonna buy?
-Talk to you later everyone, thanx for the biz!!!
-Kevin
prezios
giulio
Andrew
brivakn
Chung
JGard18
omahasubaru
McDade
fellfrosch
PainkillerZ
Boostup
shukes24
GimmeScoobySnacks
RS4DR
tomrichardson
98RS
jagcars26
Turk
All were shipped out today.
Jesta C: payment and address received today... will ship tomorrow morning.
hoodwho: check received saturday...will ship wednesday morning.
chuckles: check received today..will ship out thursday morning
Otaku64, jdOgg3355, EX500R, Vitamin-K, are you guys gonna buy?
-Talk to you later everyone, thanx for the biz!!!
-Kevin
| Bankheist | 11-28-2000 01:44 PM |
Jesta C, kog2kog
-- shipped about 2 hours ago during my lunch break!
Jeremy... ok buddy... just let me know when you send it so i can know when to roughly expect it.
Thanx everyone
-Kevin
-- shipped about 2 hours ago during my lunch break!
Jeremy... ok buddy... just let me know when you send it so i can know when to roughly expect it.
Thanx everyone
-Kevin
| Andrew | 11-28-2000 02:14 PM |
[img]http://www.i-club.com/ubb-files/smile.gif[/img]
| jdOgg3355 | 11-29-2000 12:56 AM |
I'm gonna buy...my payment is gonna come to you by mail.
[img]http://www.i-club.com/ubb-files/cool.gif[/img]
Jeremy
[img]http://www.i-club.com/ubb-files/cool.gif[/img]
Jeremy
Không có nhận xét nào:
Đăng nhận xét