| stever | 01-11-2008 12:19 AM |
[QUOTE=kaneda3;20668342]im still here too
whats the story on the hood, trunk and rear wing?
also want to know about coating the cf to prevent fading in the sun... i dont know much about but thought you may have a clue(i never planned on painting the parts)[/QUOTE]
The hood is coming. I need to sell some fenders to pay for the hood molds, but it's gong to get done. That will be first. The wing is such a pain in the a$$ to make molds for, but it'll probably happen. No idea when I'll get the wing and trunk done though. Maybe another 7 years :D Glad you're still hanging in there.
If you want to keep it unpainted, we'll have to make a special set. We're experimenting with one layer of really thin fiberglass on the outside and carbon underneath for strength. That way, the surface finish is really nice and there are no voids. Unfortunately it looks like fiberglass. The bumper is the real problem because of the ducts and all. To get the perfect and line the carbon weave up, it would take a lot of time and be more expensive. Probably best to do it with pre-preg (dry carbon), but it would be expensive.
There are some reasonably cheap UV inhibitors out there. Or like silentbob343 said ... paint.
whats the story on the hood, trunk and rear wing?
also want to know about coating the cf to prevent fading in the sun... i dont know much about but thought you may have a clue(i never planned on painting the parts)[/QUOTE]
The hood is coming. I need to sell some fenders to pay for the hood molds, but it's gong to get done. That will be first. The wing is such a pain in the a$$ to make molds for, but it'll probably happen. No idea when I'll get the wing and trunk done though. Maybe another 7 years :D Glad you're still hanging in there.
If you want to keep it unpainted, we'll have to make a special set. We're experimenting with one layer of really thin fiberglass on the outside and carbon underneath for strength. That way, the surface finish is really nice and there are no voids. Unfortunately it looks like fiberglass. The bumper is the real problem because of the ducts and all. To get the perfect and line the carbon weave up, it would take a lot of time and be more expensive. Probably best to do it with pre-preg (dry carbon), but it would be expensive.
There are some reasonably cheap UV inhibitors out there. Or like silentbob343 said ... paint.
| akcel | 01-11-2008 12:53 AM |
dry carbon is nice :)
| stever | 01-12-2008 02:13 AM |
[QUOTE=akcel;20681866]dry carbon is nice :)[/QUOTE]
Cha-ching. I made the molds from carbon assuming that I'd make them out of pre-preg, but the price is just too ridiculous. It used to be around $15/sq ft per ply before the price of carbon went up. I'm sure it's close to $30 or $40/sq ft now. It would probably end up being something close to $8000 just in carbon. Yikes.
Cha-ching. I made the molds from carbon assuming that I'd make them out of pre-preg, but the price is just too ridiculous. It used to be around $15/sq ft per ply before the price of carbon went up. I'm sure it's close to $30 or $40/sq ft now. It would probably end up being something close to $8000 just in carbon. Yikes.
| wrxsnowstyle | 01-12-2008 04:49 AM |
ooh. subscribed to the 7 year thread...22b is always worth it.
| akcel | 01-12-2008 06:44 AM |
[QUOTE=stever;20696357]Cha-ching. I made the molds from carbon assuming that I'd make them out of pre-preg, but the price is just too ridiculous. It used to be around $15/sq ft per ply before the price of carbon went up. I'm sure it's close to $30 or $40/sq ft now. It would probably end up being something close to $8000 just in carbon. Yikes.[/QUOTE]
still nice ;)
still nice ;)
| John2.5RS | 01-12-2008 02:34 PM |
That's what she said. :D
| Spooled | 01-12-2008 07:41 PM |
wow. when this kit comes out, i'm SERIOUSLY going to consider picking up an RS just so i can put it on!
| Kaymin | 01-12-2008 08:06 PM |
will there be a full fiberglass version?
| silentbob343 | 01-13-2008 02:11 AM |
Will there be a kit for the 4dr impreza?
| stever | 01-13-2008 03:14 AM |
More Pics ... all of the bits are here.
[IMG]http://www.aerosim-research.com/images/NASIOC/front_1-1.jpg[/IMG] [IMG]http://www.aerosim-research.com/images/NASIOC/front_1-2.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/front_1-3.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-1.jpg[/IMG] [IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-2.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-3.jpg[/IMG] [IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-4.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/front_1-3.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-1.jpg[/IMG] [IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-2.jpg[/IMG]
[IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-3.jpg[/IMG] [IMG]http://www.aerosim-research.com/images/NASIOC/rear_1-4.jpg[/IMG]
| stever | 01-13-2008 03:22 AM |
[QUOTE=Kaymin;20702432]will there be a full fiberglass version?[/QUOTE]
Yes, fiberglass and carbon.
The kit started out being a 22B replica kit and ended up being more of a WRC replica. The bumpers are WRC replicas and the fenders are sort of an amalgam between the 22B and the WRC. The wheel on the front left is an 8x18" speedline tarmac wheel, so there's definitely a ton of room for more.
So far no 4 door. It's a major PITA to extend the door jam properly, but I might do it in the near future if these sell well enough. I'll have these parts posted in the vendors section as soon as my Aerosim Research Ltd. vendors account is renewed.
Oh yeah, the parts in the pics are the test parts. Basically the first parts out of the molds and are just taped in place on my car. They are not fitted or trimmed completely. When fitted and bolted/bonded on they will match perfectly, although they are pretty damn close just held on by tape.
-Steve
Yes, fiberglass and carbon.
The kit started out being a 22B replica kit and ended up being more of a WRC replica. The bumpers are WRC replicas and the fenders are sort of an amalgam between the 22B and the WRC. The wheel on the front left is an 8x18" speedline tarmac wheel, so there's definitely a ton of room for more.
So far no 4 door. It's a major PITA to extend the door jam properly, but I might do it in the near future if these sell well enough. I'll have these parts posted in the vendors section as soon as my Aerosim Research Ltd. vendors account is renewed.
Oh yeah, the parts in the pics are the test parts. Basically the first parts out of the molds and are just taped in place on my car. They are not fitted or trimmed completely. When fitted and bolted/bonded on they will match perfectly, although they are pretty damn close just held on by tape.
-Steve
| Subaruski | 01-13-2008 03:55 AM |
praise baby jesus
do you have a price estimate yet for the two different types?
do you have a price estimate yet for the two different types?
| ony | 01-13-2008 04:57 AM |
[quote=stever;20705498]Yes, fiberglass and carbon.
The kit started out being a 22B replica kit and ended up being more of a WRC replica. The bumpers are WRC replicas and the fenders are sort of an amalgam between the 22B and the WRC. The wheel on the front left is an 8x18" speedline tarmac wheel, so there's definitely a ton of room for more.
So far no 4 door. It's a major PITA to extend the door jam properly, but I might do it in the near future if these sell well enough. I'll have these parts posted in the vendors section as soon as my Aerosim Research Ltd. vendors account is renewed.
Oh yeah, the parts in the pics are the test parts. Basically the first parts out of the molds and are just taped in place on my car. They are not fitted or trimmed completely. When fitted and bolted/bonded on they will match perfectly, although they are pretty damn close just held on by tape.
-Steve[/quote]
dont extend the door jam then. . . there are other ways to make a 4 door widebody. just make this one have a way to access the rear door handles or relocate them into the new door skins so that its legal in my state.
The kit started out being a 22B replica kit and ended up being more of a WRC replica. The bumpers are WRC replicas and the fenders are sort of an amalgam between the 22B and the WRC. The wheel on the front left is an 8x18" speedline tarmac wheel, so there's definitely a ton of room for more.
So far no 4 door. It's a major PITA to extend the door jam properly, but I might do it in the near future if these sell well enough. I'll have these parts posted in the vendors section as soon as my Aerosim Research Ltd. vendors account is renewed.
Oh yeah, the parts in the pics are the test parts. Basically the first parts out of the molds and are just taped in place on my car. They are not fitted or trimmed completely. When fitted and bolted/bonded on they will match perfectly, although they are pretty damn close just held on by tape.
-Steve[/quote]
dont extend the door jam then. . . there are other ways to make a 4 door widebody. just make this one have a way to access the rear door handles or relocate them into the new door skins so that its legal in my state.
| Kaymin | 01-13-2008 05:01 PM |
This is my next mod. Saving up now for the FG version
| stever | 01-14-2008 02:41 AM |
[QUOTE=ony;20705773]dont extend the door jam then. . . there are other ways to make a 4 door widebody. just make this one have a way to access the rear door handles or relocate them into the new door skins so that its legal in my state.[/QUOTE]
Sure thing. That's reasonably easy to do. You really need rear doors???
Sure thing. That's reasonably easy to do. You really need rear doors???
| silentbob343 | 01-14-2008 06:28 PM |
[QUOTE=stever;20714931]Sure thing. That's reasonably easy to do. You really need rear doors???[/QUOTE]
Will never own a two door car, I despise them ;) Plus I heard the 4dr was stiffer.
Will never own a two door car, I despise them ;) Plus I heard the 4dr was stiffer.
| 4wdrift | 01-14-2008 08:14 PM |
[quote=silentbob343;20722897]....Plus I heard the 4dr was stiffer.[/quote]
Lies from all the haters! :lol:
Lies from all the haters! :lol:
| wrxsnowstyle | 01-15-2008 02:56 AM |
steve-nice meeting ya tonight and nice lotus.good luck with the kit, it looks amazing!
King
King
| semaj | 01-15-2008 03:20 AM |
Now get that vendor account going, and start selling these things stever! :D
| stever | 01-15-2008 04:34 AM |
[QUOTE=semaj;20728563]Now get that vendor account going, and start selling these things stever! :D[/QUOTE]
I paid my money ... just waiting for the beginning of the month. I figure ... what's another couple of weeks after 7 years. US2JDM, who is surprisingly absent from this thread suggested that I reverse the spelling of Aerosim ... to Misorea. Then it could be [COLOR="Blue"][B]Misorea Loves Co.[/B][/COLOR] Kinda says it all.
[QUOTE=wrxsnowstyle] steve-nice meeting ya tonight and nice lotus.good luck with the kit, it looks amazing!
King[/QUOTE]
Ditto, nice meeting you too. Thanks for the props. Never say never.
Oh, and the 4 door is stiffer, but it doesn't look as good :D
I paid my money ... just waiting for the beginning of the month. I figure ... what's another couple of weeks after 7 years. US2JDM, who is surprisingly absent from this thread suggested that I reverse the spelling of Aerosim ... to Misorea. Then it could be [COLOR="Blue"][B]Misorea Loves Co.[/B][/COLOR] Kinda says it all.
[QUOTE=wrxsnowstyle] steve-nice meeting ya tonight and nice lotus.good luck with the kit, it looks amazing!
King[/QUOTE]
Ditto, nice meeting you too. Thanks for the props. Never say never.
Oh, and the 4 door is stiffer, but it doesn't look as good :D
| akcel | 01-15-2008 05:30 AM |
goto bed steve!
[QUOTE=stever;20728785]I paid my money ... just waiting for the beginning of the month. I figure ... what's another couple of weeks after 7 years. US2JDM, who is surprisingly absent from this thread suggested that I reverse the spelling of Aerosim ... to Misorea. Then it could be [COLOR="Blue"][B]Misorea Loves Co.[/B][/COLOR] Kinda says it all.
Ditto, nice meeting you too. Thanks for the props. Never say never.
Oh, and the 4 door is stiffer, but it doesn't look as good :D[/QUOTE]
[QUOTE=stever;20728785]I paid my money ... just waiting for the beginning of the month. I figure ... what's another couple of weeks after 7 years. US2JDM, who is surprisingly absent from this thread suggested that I reverse the spelling of Aerosim ... to Misorea. Then it could be [COLOR="Blue"][B]Misorea Loves Co.[/B][/COLOR] Kinda says it all.
Ditto, nice meeting you too. Thanks for the props. Never say never.
Oh, and the 4 door is stiffer, but it doesn't look as good :D[/QUOTE]
| 4wdrift | 01-19-2008 01:16 AM |
The coupe still looks better. :lol:
'sides, unless you are circuit racing for 10ths and 100ths off your lap times it doesn't matter.
Take that coupe haters!! :lol:
'sides, unless you are circuit racing for 10ths and 100ths off your lap times it doesn't matter.
Take that coupe haters!! :lol:
| ony | 01-19-2008 01:42 AM |
[quote=stever;20714931]Sure thing. That's reasonably easy to do. You really need rear doors???[/quote]
i actually do most often; and i do as of now like the 4dr but i go back and forth. just make the rear doors swell out but meet in the same place bottom and glassside. it may even make the 1/4 panels look better that way.
HTautos is making a 4 door rear with door handles but yours looks much better and money is just money. besides im sure since it took 7 years for this one; in 3.5 years to finish the back half of another one? whos to say how much money ill have to throw around
hah :p just playing with you. but really id like to see what you do with a 4dr
i actually do most often; and i do as of now like the 4dr but i go back and forth. just make the rear doors swell out but meet in the same place bottom and glassside. it may even make the 1/4 panels look better that way.
HTautos is making a 4 door rear with door handles but yours looks much better and money is just money. besides im sure since it took 7 years for this one; in 3.5 years to finish the back half of another one? whos to say how much money ill have to throw around
hah :p just playing with you. but really id like to see what you do with a 4dr
| Urabus808 | 01-19-2008 01:57 AM |
Thread got my hopes up :sadbanana:
| ony | 01-19-2008 02:17 AM |
[quote=Urabus808;20784897]is this kit still available?[/quote]
i lol'd
i lol'd
| B00st3dWRX | 01-19-2008 02:31 AM |
HAHAHA you obviously havnt read the previous 45 pages ...or have read it post by post day by day waiting....
| pengmao | 01-19-2008 02:32 AM |
does not look very great..
| B00st3dWRX | 01-19-2008 02:33 AM |
its neither finished nor in Carbon yet...
| bigboyzben | 01-19-2008 03:49 AM |
[QUOTE=pengmao;20785141]does not look very great..[/QUOTE]
+1
Wow, the widebody kit doesn't even match the color of the car, WTF is up with that? And look at those widebody pieces barely hanging on with the Uline packing tape, you can't even drive over 10mph with that kit or it'll fly off. Good for nothing Misorea Love Co.! :lol:
[COLOR="White"]Awesome job Steve, can't wait to see your finished CF pieces![/COLOR]
+1
Wow, the widebody kit doesn't even match the color of the car, WTF is up with that? And look at those widebody pieces barely hanging on with the Uline packing tape, you can't even drive over 10mph with that kit or it'll fly off. Good for nothing Misorea Love Co.! :lol:
[COLOR="White"]Awesome job Steve, can't wait to see your finished CF pieces![/COLOR]
| stever | 01-20-2008 08:53 PM |
[QUOTE=ony;20784803]i actually do most often; and i do as of now like the 4dr but i go back and forth. just make the rear doors swell out but meet in the same place bottom and glassside. it may even make the 1/4 panels look better that way.
HTautos is making a 4 door rear with door handles but yours looks much better and money is just money. besides im sure since it took 7 years for this one; in 3.5 years to finish the back half of another one? whos to say how much money ill have to throw around
hah :p just playing with you. but really id like to see what you do with a 4dr[/QUOTE]
Yeah, I guess I would use the rear doors if someone put them on my car. It wouldn't be too much hassle to make the kit work for a 4 door. I'd have to mold some extensions to the door jams that would get bonded on to the fenders. I would have to make some inserts that could go into the mold so I could make a front half and a rear half of the rear fender. Let's just hope it doesn't take 3.5 years. I don't want to wait that long either.
[QUOTE=Urabus808]Thread got my hopes up :sadbanana:[/QUOTE]
Am I missing something here? The fenders are done. I'm starting to produce them. My car isn't finished, but the fenders are. I have one fender done in carbon, but I was waiting for a complete carbon kit to post pics.
[QUOTE=pengmao]does not look very great..[/QUOTE]
Any comments on how I should make it better? Maybe make it look like an '08?
[QUOTE=B00st3dWRX]its neither finished nor in Carbon yet...[/QUOTE]
It's finished, but I have not finished the first carbon set. I'm going to be laying up carbon parts over the next couple of weeks. I'll post pics as they go if people want to see them. The first carbon kit is going on my car and I'll post pics of the install as it goes.
[QUOTE=bigboyzben][QUOTE=pengmao]does not look very great..[/QUOTE]
+1
Wow, the widebody kit doesn't even match the color of the car, WTF is up with that? And look at those widebody pieces barely hanging on with the Uline packing tape, you can't even drive over 10mph with that kit or it'll fly off. Good for nothing Misorea Love Co.!
Awesome job Steve, can't wait to see your finished CF pieces![/QUOTE]
Thanks Ben. You're to blame, it was your crappy Uline packing tape. Just so nobody thinks that I'm leaving it like that ... the first set was a test set to get the molds seasoned and to figure out what kind of vacuum and layup schedule to use for the parts. They're not production pieces, but they are dimensionally the same. I just taped them to my car so people could see what the kit looks like on a car. It's only temporary and will be replaced by a carbon kit in the next few weeks.
I'll post pics of that as it happens, including pics of how the rear fenders are modified for clearance, etc.
And for those who are pissed off because this took so long, I'm sorry. There was nothing I could do, but at least I didn't give up. I doubt that many of you would dump as much time and money into this without throwing in the towel.
HTautos is making a 4 door rear with door handles but yours looks much better and money is just money. besides im sure since it took 7 years for this one; in 3.5 years to finish the back half of another one? whos to say how much money ill have to throw around
hah :p just playing with you. but really id like to see what you do with a 4dr[/QUOTE]
Yeah, I guess I would use the rear doors if someone put them on my car. It wouldn't be too much hassle to make the kit work for a 4 door. I'd have to mold some extensions to the door jams that would get bonded on to the fenders. I would have to make some inserts that could go into the mold so I could make a front half and a rear half of the rear fender. Let's just hope it doesn't take 3.5 years. I don't want to wait that long either.
[QUOTE=Urabus808]Thread got my hopes up :sadbanana:[/QUOTE]
Am I missing something here? The fenders are done. I'm starting to produce them. My car isn't finished, but the fenders are. I have one fender done in carbon, but I was waiting for a complete carbon kit to post pics.
[QUOTE=pengmao]does not look very great..[/QUOTE]
Any comments on how I should make it better? Maybe make it look like an '08?
[QUOTE=B00st3dWRX]its neither finished nor in Carbon yet...[/QUOTE]
It's finished, but I have not finished the first carbon set. I'm going to be laying up carbon parts over the next couple of weeks. I'll post pics as they go if people want to see them. The first carbon kit is going on my car and I'll post pics of the install as it goes.
[QUOTE=bigboyzben][QUOTE=pengmao]does not look very great..[/QUOTE]
+1
Wow, the widebody kit doesn't even match the color of the car, WTF is up with that? And look at those widebody pieces barely hanging on with the Uline packing tape, you can't even drive over 10mph with that kit or it'll fly off. Good for nothing Misorea Love Co.!
Awesome job Steve, can't wait to see your finished CF pieces![/QUOTE]
Thanks Ben. You're to blame, it was your crappy Uline packing tape. Just so nobody thinks that I'm leaving it like that ... the first set was a test set to get the molds seasoned and to figure out what kind of vacuum and layup schedule to use for the parts. They're not production pieces, but they are dimensionally the same. I just taped them to my car so people could see what the kit looks like on a car. It's only temporary and will be replaced by a carbon kit in the next few weeks.
I'll post pics of that as it happens, including pics of how the rear fenders are modified for clearance, etc.
And for those who are pissed off because this took so long, I'm sorry. There was nothing I could do, but at least I didn't give up. I doubt that many of you would dump as much time and money into this without throwing in the towel.
| John2.5RS | 01-20-2008 09:18 PM |
I've been following this since the beginning, and I'm now on my 3rd RS since this thread started. Big Props for never giving up! :banana:
| US2JDM | 01-22-2008 05:10 PM |
You rang? :D
Yeah, I've been surprisingly absent from NASIOC as a whole for a while. But I think the Misorea Loves Co. fend4r kit should sell like hotcakes! It's the most JDM kit made in America!!1 :lol:
Now I have to find a beater GM-body to put some on. Thanks, SteveR! :p
Yeah, I've been surprisingly absent from NASIOC as a whole for a while. But I think the Misorea Loves Co. fend4r kit should sell like hotcakes! It's the most JDM kit made in America!!1 :lol:
Now I have to find a beater GM-body to put some on. Thanks, SteveR! :p
| RS22b | 01-22-2008 05:23 PM |
Steve you have a PM ;)
| stever | 01-23-2008 06:08 AM |
[QUOTE=John2.5RS;20800872]I've been following this since the beginning, and I'm now on my 3rd RS since this thread started. Big Props for never giving up! :banana:[/QUOTE]
Thanks for hanging in there. Never say die ... I've still got my RS. It's probably one of the lowest mile one owner RS's around. Something like 21K miles ... not that there's much left of it, but what's left is low mileage.
[QUOTE=US2JDM]You rang?
Yeah, I've been surprisingly absent from NASIOC as a whole for a while. But I think the Misorea Loves Co. fend4r kit should sell like hotcakes! It's the most JDM kit made in America!!1
Now I have to find a beater GM-body to put some on. Thanks, SteveR! [/QUOTE]
It's about time you stopped having babies and got back on NASIOC. I think I might know of a black RS. Remember Simon's car? It went for free to a good home. Well, a good driveway to sit in and rust. I'll have to see if it's still around.
[QUOTE=RS22b]Steve you have a PM :)[/QUOTE]
Back at ya ...
Thanks for hanging in there. Never say die ... I've still got my RS. It's probably one of the lowest mile one owner RS's around. Something like 21K miles ... not that there's much left of it, but what's left is low mileage.
[QUOTE=US2JDM]You rang?
Yeah, I've been surprisingly absent from NASIOC as a whole for a while. But I think the Misorea Loves Co. fend4r kit should sell like hotcakes! It's the most JDM kit made in America!!1
Now I have to find a beater GM-body to put some on. Thanks, SteveR! [/QUOTE]
It's about time you stopped having babies and got back on NASIOC. I think I might know of a black RS. Remember Simon's car? It went for free to a good home. Well, a good driveway to sit in and rust. I'll have to see if it's still around.
[QUOTE=RS22b]Steve you have a PM :)[/QUOTE]
Back at ya ...
| jamal | 01-24-2008 04:47 PM |
oooh wow. And there's a new wall in there too. Mind if I stop by and look this weekend or the next?
| stever | 01-25-2008 01:14 AM |
Yeah, the hole in the wall is no more ...
This weekend is going to be busy, but next weekend is cool.
This weekend is going to be busy, but next weekend is cool.
| US2JDM | 01-25-2008 10:52 AM |
[QUOTE=stever;20834012]It's about time you stopped having babies and got back on NASIOC. I think I might know of a black RS. Remember Simon's car? It went for free to a good home. Well, a good driveway to sit in and rust. I'll have to see if it's still around.
[/QUOTE]
:lol: Man, I dunno about that car...I hear it has a shady history. :lol:
[/QUOTE]
:lol: Man, I dunno about that car...I hear it has a shady history. :lol:
| stever | 01-28-2008 03:34 AM |
[QUOTE=US2JDM;20866136]:lol: Man, I dunno about that car...I hear it has a shady history. :lol:[/QUOTE]
Shady? Nah ... I think there's a title somewhere around. Just cause Simon sort of owned it ...
Shady? Nah ... I think there's a title somewhere around. Just cause Simon sort of owned it ...
| sizzflair | 02-04-2008 01:32 AM |
as long as your kit finishes by sometime in 2 years.... you have a customer lol
| Aerosim Research Ltd | 02-05-2008 04:04 AM |
[QUOTE=sizzflair;20985973]as long as your kit finishes by sometime in 2 years.... you have a customer lol[/QUOTE]
Well, I'm back as a vendor, so I can now sell these things. I'll be posting a for sale thread in the Vendor's section. But until then, here's a teaser ... first carbon fender fresh out of the mold..
[IMG]http://www.aerosim-research.com/images/NASIOC/carbon_1.jpg[/IMG]
I probably won't keep them in stock, so they'll be made to order. Shouldn't take more than a week to make a full set. Hopefully not 2 years. :banana:
Well, I'm back as a vendor, so I can now sell these things. I'll be posting a for sale thread in the Vendor's section. But until then, here's a teaser ... first carbon fender fresh out of the mold..
[IMG]http://www.aerosim-research.com/images/NASIOC/carbon_1.jpg[/IMG]
I probably won't keep them in stock, so they'll be made to order. Shouldn't take more than a week to make a full set. Hopefully not 2 years. :banana:
| US2JDM | 02-05-2008 04:09 AM |
Nice to see them starting to come outta those (very time-, money, and labor-consuming) molds at last, Steve! :D
| akcel | 02-05-2008 04:26 AM |
[QUOTE=Aerosim Research Ltd;21000451]Well, I'm back as a vendor, so I can now sell these things. I'll be posting a for sale thread in the Vendor's section. But until then, here's a teaser ... first carbon fender fresh out of the mold..
[IMG]http://www.aerosim-research.com/images/NASIOC/carbon_1.jpg[/IMG]
I probably won't keep them in stock, so they'll be made to order. Shouldn't take more than a week to make a full set. Hopefully not 2 years. :banana:[/QUOTE]
inbetween making those carbon fenders...feel like lowering my v8 spec c seats...they sit a little high in my gc :)
[IMG]http://www.aerosim-research.com/images/NASIOC/carbon_1.jpg[/IMG]
I probably won't keep them in stock, so they'll be made to order. Shouldn't take more than a week to make a full set. Hopefully not 2 years. :banana:[/QUOTE]
inbetween making those carbon fenders...feel like lowering my v8 spec c seats...they sit a little high in my gc :)
| Aerosim Research Ltd | 02-05-2008 04:27 AM |
Finally available in hard to damage carbon fiber. At great cost to me of course. Woot woot.
You coming to visit the fenders anytime soon?
You coming to visit the fenders anytime soon?
| Aerosim Research Ltd | 02-05-2008 04:30 AM |
[QUOTE=akcel;21000500]inbetween making those carbon fenders...feel like lowering my v8 spec c seats...they sit a little high in my gc :)[/QUOTE]
Well, I've got a grinder and a welder. I can make anything. :D
Well, I've got a grinder and a welder. I can make anything. :D
| mrbell | 02-05-2008 11:37 AM |
Makes me wish I hadn't sold my GC8... ah well, looks fantastic. Good jeorb, steve.
| RS22b | 02-05-2008 11:53 AM |
Steve, sorry havent got back to you things have been quite busy. I will call you later in the week after i get the keys to the new shop ;)
_billy
_billy
| 4wdrift | 02-05-2008 12:38 PM |
Steve, You got PM. ;)
| chulooz | 02-05-2008 01:00 PM |
my god, you sir are creating things of beauty and very unhappy wallets, im going to keep an eye out for them to be released, make sure you bump this thread when you do. thanks.
| John2.5RS | 02-05-2008 02:36 PM |
Quick question, Will the Rear fenders and sideskirts be available? Or is it an all or nothing deal?
| US2JDM | 02-05-2008 08:20 PM |
[QUOTE=Aerosim Research Ltd;21000507]Finally available in hard to damage carbon fiber. At great cost to me of course. Woot woot.
You coming to visit the fenders anytime soon?[/QUOTE]
Indeed.
Dunno ab00t the visit, but you'll be one of the first to know. :) ;)
You coming to visit the fenders anytime soon?[/QUOTE]
Indeed.
Dunno ab00t the visit, but you'll be one of the first to know. :) ;)
| akcel | 02-05-2008 09:28 PM |
[QUOTE=Aerosim Research Ltd;21000515]Well, I've got a grinder and a welder. I can make anything. :D[/QUOTE]
when are you normally at the shop? you're not doing that whole til 3am thing again are you? or when are you down here in sd ;)
when are you normally at the shop? you're not doing that whole til 3am thing again are you? or when are you down here in sd ;)
| Aerosim Research Ltd | 02-06-2008 03:39 AM |
[QUOTE=mrbell;21002998]Makes me wish I hadn't sold my GC8... ah well, looks fantastic. Good jeorb, steve.[/QUOTE]
Yeah, if mine still had a drivetrain and an interior, I might have sold it by now. Guess I'm lucky that I dismantled it and sold off the bits I didn't need.
[QUOTE=RS22b]Steve, sorry havent got back to you things have been quite busy. I will call you later in the week after i get the keys to the new shop
_billy[/QUOTE]
No problem. Woo hoo ... new shop keys. I've been a bit busy too. Call me anytime ... the later the better.
[QUOTE=4wdrift]Steve, You got PM.[/QUOTE]
I'll log in as stever and check it in a minute.
[QUOTE=chulooz]my god, you sir are creating things of beauty and very unhappy wallets, im going to keep an eye out for them to be released, make sure you bump this thread when you do. thanks.[/QUOTE]
Thank you. They're released ... I just posted in the Vendor For Sale area last night. I should be able to get one complete set done a week, give or take.
[QUOTE=John2.5RS]Quick question, Will the Rear fenders and sideskirts be available? Or is it an all or nothing deal?[/QUOTE]
Well, the side skirts with the rear fenders and rear bumper might fit the 22B front fenders, but I can't guarantee it. Shouldn't be too hard to do a bit of massaging to the side skirts to make them fit. Hopefully it doesn't look too weird since the wheel well opening is bigger on these fenders than the 22B and stock RS.
Anyway, I don't have a problem selling the rear fenders and skirts. You would need the rear bumper though. Nothing else will fit the fenders.
[QUOTE=US2JDM][QUOTE=Aerosim Research Ltd]Finally available in hard to damage carbon fiber. At great cost to me of course. Woot woot.
You coming to visit the fenders anytime soon?[/QUOTE]
Indeed.
Dunno ab00t the visit, but you'll be one of the first to know.[/QUOTE]
Get your a$$ back here. So Cal misses you.
[QUOTE=akcel][QUOTE=Aerosim Research Ltd]Well, I've got a grinder and a welder. I can make anything.[/QUOTE]
when are you normally at the shop? you're not doing that whole til 3am thing again are you? or when are you down here in sd[/QUOTE]
Trying to keep somewhat normal hours. Sort of 1pm-9pm or so. All depends on how much I get done. At least it's not 5pm-3am. I'm hardly ever in SD ... just the odd trip to visit Kartboy and his segways.
Yeah, if mine still had a drivetrain and an interior, I might have sold it by now. Guess I'm lucky that I dismantled it and sold off the bits I didn't need.
[QUOTE=RS22b]Steve, sorry havent got back to you things have been quite busy. I will call you later in the week after i get the keys to the new shop
_billy[/QUOTE]
No problem. Woo hoo ... new shop keys. I've been a bit busy too. Call me anytime ... the later the better.
[QUOTE=4wdrift]Steve, You got PM.[/QUOTE]
I'll log in as stever and check it in a minute.
[QUOTE=chulooz]my god, you sir are creating things of beauty and very unhappy wallets, im going to keep an eye out for them to be released, make sure you bump this thread when you do. thanks.[/QUOTE]
Thank you. They're released ... I just posted in the Vendor For Sale area last night. I should be able to get one complete set done a week, give or take.
[QUOTE=John2.5RS]Quick question, Will the Rear fenders and sideskirts be available? Or is it an all or nothing deal?[/QUOTE]
Well, the side skirts with the rear fenders and rear bumper might fit the 22B front fenders, but I can't guarantee it. Shouldn't be too hard to do a bit of massaging to the side skirts to make them fit. Hopefully it doesn't look too weird since the wheel well opening is bigger on these fenders than the 22B and stock RS.
Anyway, I don't have a problem selling the rear fenders and skirts. You would need the rear bumper though. Nothing else will fit the fenders.
[QUOTE=US2JDM][QUOTE=Aerosim Research Ltd]Finally available in hard to damage carbon fiber. At great cost to me of course. Woot woot.
You coming to visit the fenders anytime soon?[/QUOTE]
Indeed.
Dunno ab00t the visit, but you'll be one of the first to know.[/QUOTE]
Get your a$$ back here. So Cal misses you.
[QUOTE=akcel][QUOTE=Aerosim Research Ltd]Well, I've got a grinder and a welder. I can make anything.[/QUOTE]
when are you normally at the shop? you're not doing that whole til 3am thing again are you? or when are you down here in sd[/QUOTE]
Trying to keep somewhat normal hours. Sort of 1pm-9pm or so. All depends on how much I get done. At least it's not 5pm-3am. I'm hardly ever in SD ... just the odd trip to visit Kartboy and his segways.
| [email protected] | 02-06-2008 11:15 AM |
HEY! keep my segways out of it!!! :lol: :diaf:
They probably have more mile on it then that RS in the shop ;)
T
They probably have more mile on it then that RS in the shop ;)
T
| akcel | 02-06-2008 03:06 PM |
:X ha
| John2.5RS | 02-07-2008 03:44 AM |
Any pictures of said rear bumper? Also I got a little confused about the sideskirts. So have you made some, or do you have plans to? :confused:
| HeyChris | 02-07-2008 07:13 PM |
[[email protected];21017680]HEY! keep my segways out of it!!! :lol: :diaf:
They probably have more mile on it then that RS in the shop ;)
T[/QUOTE]
I'd would second that statement. :banana:
They probably have more mile on it then that RS in the shop ;)
T[/QUOTE]
I'd would second that statement. :banana:
| Aerosim Research Ltd | 02-08-2008 06:06 AM |
[[email protected];21017680]HEY! keep my segways out of it!!! :lol: :diaf:
They probably have more mile on it then that RS in the shop ;)
T[/QUOTE]
They have more parts in them too. And a motor ... and wheels ... and ... and. I win the most cars that don't work prize. Go figure that the Lotus is the one that runs.
[QUOTE=John2.5RS]Any pictures of said rear bumper? Also I got a little confused about the sideskirts. So have you made some, or do you have plans to?[/QUOTE]
Ooops ... answered your post on the other thread. The parts that you'll see pics of are solid bondo. I haven't made any of them yet, but the kits have carbon or fiberglass skirts ... not 10 pound bondo skirts.
I didn't even realize that there weren't any decent pics of the whole rear bumper. Sorry about that I'll post some on the other thread as well. Didin't even think of taking pics of the rear bumper for some reason.
[QUOTE=HeyChris][[email protected]]HEY! keep my segways out of it!!!
They probably have more mile on it then that RS in the shop
T[/QUOTE]
I'd would second that statement.[/QUOTE]
Hey Chris ... Sorry I haven't called you back. I've been running around a lot and keep forgetting until it's way late ... like now. I'll call you this weekend.
They probably have more mile on it then that RS in the shop ;)
T[/QUOTE]
They have more parts in them too. And a motor ... and wheels ... and ... and. I win the most cars that don't work prize. Go figure that the Lotus is the one that runs.
[QUOTE=John2.5RS]Any pictures of said rear bumper? Also I got a little confused about the sideskirts. So have you made some, or do you have plans to?[/QUOTE]
Ooops ... answered your post on the other thread. The parts that you'll see pics of are solid bondo. I haven't made any of them yet, but the kits have carbon or fiberglass skirts ... not 10 pound bondo skirts.
I didn't even realize that there weren't any decent pics of the whole rear bumper. Sorry about that I'll post some on the other thread as well. Didin't even think of taking pics of the rear bumper for some reason.
[QUOTE=HeyChris][[email protected]]HEY! keep my segways out of it!!!
They probably have more mile on it then that RS in the shop
T[/QUOTE]
I'd would second that statement.[/QUOTE]
Hey Chris ... Sorry I haven't called you back. I've been running around a lot and keep forgetting until it's way late ... like now. I'll call you this weekend.
| soslow | 02-08-2008 07:04 AM |
PM sent:banana:
| 4wdrift | 02-08-2008 06:13 PM |
[quote=Aerosim Research Ltd;21044877]
Hey Chris ... Sorry I haven't called you back. I've been running around a lot and keep forgetting until it's way late ... like now. I'll call you this weekend.[/quote]
Ring me too! ;)
Hey Chris ... Sorry I haven't called you back. I've been running around a lot and keep forgetting until it's way late ... like now. I'll call you this weekend.[/quote]
Ring me too! ;)
| HeyChris | 02-08-2008 08:14 PM |
[QUOTE=Aerosim Research Ltd;21044877] ... Hey Chris ... Sorry I haven't called you back. I've been running around a lot and keep forgetting until it's way late ... like now. I'll call you this weekend.[/QUOTE]
No worries.. Between poopie diapers :unamused:, and looking for a new gig. :sadbanana: I've been pre-occupied myself.
C.
No worries.. Between poopie diapers :unamused:, and looking for a new gig. :sadbanana: I've been pre-occupied myself.
C.
Không có nhận xét nào:
Đăng nhận xét