| kirbwrx | 09-19-2007 12:17 PM |
i just got my gauges in, ordered the performance egt, oil pressure, and electric boost...can i daisy chain these together or do i have to run them all seperate? if i can link them, how do i do that?
| paranoidWRX | 09-19-2007 01:27 PM |
[quote=Prosport Gauges;19416185]We are not allowed to on this site.[/quote]
interesting... did not know that...
Do you offer discounts on combo orders? Like if I were to get 3-6 different gauges or same price?
interesting... did not know that...
Do you offer discounts on combo orders? Like if I were to get 3-6 different gauges or same price?
| Prosport Gauges | 09-19-2007 02:10 PM |
[QUOTE=kirbwrx;19423020]i just got my gauges in, ordered the performance egt, oil pressure, and electric boost...can i daisy chain these together or do i have to run them all seperate? if i can link them, how do i do that?[/QUOTE]
The performance series does not come with the daisy chain option, you can run all red wires together, all black wires together, etc..
The performance series does not come with the daisy chain option, you can run all red wires together, all black wires together, etc..
| Dforce | 09-19-2007 02:17 PM |
Just got my electrical boost gauge exchanged under warranty. Quick service and great communication. Lets see if the gauge will work this time :lol:
| kirbwrx | 09-19-2007 04:14 PM |
[QUOTE=Prosport Gauges;19424449]The performance series does not come with the daisy chain option, you can run all red wires together, all black wires together, etc..[/QUOTE]
so you are saying i only need to run one wire or just that i can run all of them to the same spot? can i twist all the reds together and make one connection with it? same for the black, orange, and white as well?
so you are saying i only need to run one wire or just that i can run all of them to the same spot? can i twist all the reds together and make one connection with it? same for the black, orange, and white as well?
| CyborgX_CZ | 09-20-2007 08:45 AM |
Now what�. My Oil pressure just stops working. Needle is stock in between 30 � 31 psi and jerking. Is that meaning my oil pressure sensor is bad or what? Initial sweep on beginning looks ok and I have no warning what�s so ever. I thing I bought this from Ultimate CC vendor here on NASIOC and I hate to take that sensor off and not driving my car and wait for replacement because I don�t have anything to plug in that hole in my oil sandwich adapter. Any help?
| Prosport Gauges | 09-20-2007 10:51 AM |
[QUOTE=kirbwrx;19426307]so you are saying i only need to run one wire or just that i can run all of them to the same spot? can i twist all the reds together and make one connection with it? same for the black, orange, and white as well?[/QUOTE]
Yes that is correct (twist them all together)-all to the same spot.
Yes that is correct (twist them all together)-all to the same spot.
| Prosport Gauges | 09-20-2007 10:52 AM |
[QUOTE=CyborgX_CZ;19433450]Now what�. My Oil pressure just stops working. Needle is stock in between 30 � 31 psi and jerking. Is that meaning my oil pressure sensor is bad or what? Initial sweep on beginning looks ok and I have no warning what�s so ever. I thing I bought this from Ultimate CC vendor here on NASIOC and I hate to take that sensor off and not driving my car and wait for replacement because I don�t have anything to plug in that hole in my oil sandwich adapter. Any help?[/QUOTE]
I understand.. no problem that you bought from Ultimate. Just give us a call and we will get you taken care of. 727-572-9011
I understand.. no problem that you bought from Ultimate. Just give us a call and we will get you taken care of. 727-572-9011
| Ranyart | 09-20-2007 11:07 AM |
I love my Prosport electric boost gauge! Pretty easy to install if you are comfortable working with the wires.
| kirbwrx | 09-20-2007 02:46 PM |
am i going to need more wires or is the length provided enough? hope this isnt a bumb question, but i know it says black wire to batt ground...can i just ground it anywhere? same for the power, just find somewhere where there is a constant power like the lighter element? also is there any other place to put the egt sensor besides tapping the manifold? can i put it where the uppipe one is since my ap defeated that cel?
| Prosport Gauges | 09-20-2007 03:19 PM |
You did not specify which gauge you had, preformance gauges do NOT go direct to 12v constant. Just follow the directions with the gauges. But if you have premium then yes, any 12v constant source is fine.
Yes ground is ground anywhere on the car.
Yes you can put the egt probe in the up pipe.
Yes ground is ground anywhere on the car.
Yes you can put the egt probe in the up pipe.
| kirbwrx | 09-20-2007 04:30 PM |
i have the performance ones...can i run all the wires of the same color into a single wire and connect that instead of having a bunch a wires connected at a single point?
| Prosport Gauges | 09-20-2007 05:07 PM |
yes you can
| stierzy34 | 09-20-2007 05:11 PM |
I just ordered a boost and oil pressure gauge. For my oil pressure gauge I was planning on using the spot under the intercooler. I also ordered the adapter from fastwrx.com. Is the Prosport sender small enough to be able to fit in this spot?
| quadtard | 09-20-2007 05:13 PM |
thanks for helping me out with my connector dilemma. got all three gauges installed, and they look great!
| sphereworkz | 09-20-2007 11:37 PM |
First mod help
�
�
Does any one know how I could install prosport gauges. I have a 08 wrx and this is the first mod I want to do. I check every where and I cant figure out where to put them in my car. Help
| CyborgX_CZ | 09-21-2007 10:03 AM |
What gauges you talking about? You need to specify which one :p
| sphereworkz | 09-22-2007 12:45 AM |
Gauge help
�
�
I want to install the Electrical Boost Gauge, temp gauge and the Electrical Digital Air/Fuel Ratio &Volt Gauge. I dont have a clue where to begin or and Idea of where they should go. Do you think I should get a pro to do this work? And I wonder how much will it cost?
| Prosport Gauges | 09-22-2007 03:25 PM |
They are not hard to install. You will nedd an oil galley plug or oil filter adaptor to install the sender for the oil temp gauge. I know their are a few install tutorials on this forum to help you along with the instructions that come with them.
| Tim Maryak | 09-22-2007 05:39 PM |
Just got the electric premium boost gauge in. I'm planning on installing it alone on the steering column. Is it easiest to just run the wires from the gauges to the four wires coming off of the clock? It seems like it has the four necessary for install easily accessible. Otherwise any threads of interest showing how to get to the necessary wires near the steering column.
| Tim Maryak | 09-23-2007 09:28 PM |
Nevermind I got it all installed today. The gauge works great. Only thing I would recommend is increasing the length of the instrument wire. I had maybe 10" of wire. Definitely had to solder some extra length in. Also, I had a brass colored looking bracket in my kit. I wasn't sure what it was for?
| Prosport Gauges | 09-24-2007 07:16 AM |
Thanks for the tip.
The brass U-Bracket is used to secure the gauge into the dash. It mounts from behind and keep the gauge tight in the dash/pod.
The brass U-Bracket is used to secure the gauge into the dash. It mounts from behind and keep the gauge tight in the dash/pod.
| Tim Maryak | 09-24-2007 09:04 AM |
[quote=Prosport Gauges;19472152]Thanks for the tip.
The brass U-Bracket is used to secure the gauge into the dash. It mounts from behind and keep the gauge tight in the dash/pod.[/quote]
Ahh well it seems fine as is, but I'll keep that in mind. I'm so happy I bought this gauge and didn't spend 2x or 3x more on defi's...
The brass U-Bracket is used to secure the gauge into the dash. It mounts from behind and keep the gauge tight in the dash/pod.[/quote]
Ahh well it seems fine as is, but I'll keep that in mind. I'm so happy I bought this gauge and didn't spend 2x or 3x more on defi's...
| Prosport Gauges | 09-24-2007 09:33 AM |
Me Too !!! lol
| Tim Maryak | 09-24-2007 11:44 AM |
[quote=Prosport Gauges;19472737]Me Too !!! lol[/quote]
So your shop is down in St. Pete, FL? I go down there ever year for Thanksgiving and stay down near the Don CeSar. Maybe I can stop by your shop this year..:cool:
So your shop is down in St. Pete, FL? I go down there ever year for Thanksgiving and stay down near the Don CeSar. Maybe I can stop by your shop this year..:cool:
| Prosport Gauges | 09-24-2007 12:33 PM |
[QUOTE=Tim Maryak;19474106]So your shop is down in St. Pete, FL? I go down there ever year for Thanksgiving and stay down near the Don CeSar. Maybe I can stop by your shop this year..:cool:[/QUOTE]
Well, yes you can but not much to look at here...we [U]do not [/U]have a retail shop. People stop by to buy gauges to save on shipping or to see them working, etc..but we are not a shop.
Well, yes you can but not much to look at here...we [U]do not [/U]have a retail shop. People stop by to buy gauges to save on shipping or to see them working, etc..but we are not a shop.
| CyborgX_CZ | 10-01-2007 03:50 PM |
[FONT=Times New Roman][SIZE=3]Receive new oil pressure sender. Very satisfy with customer service fast shipping. Thanks. :banana: [/SIZE][/FONT]
| baker2gbootleg | 10-01-2007 05:14 PM |
will prosport gauges fit in the defi center gauges pod with some rubber raped around them to fit? or are they just to deep of a gauge?
| designfate | 10-02-2007 12:38 AM |
any word on the green 60mm gauges? My eyes are so bad that i need the bigger gauges... :(
| DanWRX | 10-02-2007 12:46 AM |
Got my gauges from Ultimate CC a month or so ago. Everything works great, except the boost gauge reads 1-1.5psi low. Also one thing I figured out incase it hasn't been posted here, is that if you want to reset the peak on a premium gauge:
Press the peak button so it goes into peak mode
Hold the peak button until it starts flashing
Wait until it stops flashing and goes back into normal mode
Press the peak button so it goes into peak mode
Hold the peak button until it starts flashing
Wait until it stops flashing and goes back into normal mode
| Prosport Gauges | 10-02-2007 03:20 PM |
[QUOTE=baker2gbootleg;19553549]will prosport gauges fit in the defi center gauges pod with some rubber raped around them to fit? or are they just to deep of a gauge?[/QUOTE]
I do not know the dimensions of the defi pod?? If you have them I can tell you. Just email us direct.
I do not know the dimensions of the defi pod?? If you have them I can tell you. Just email us direct.
| Prosport Gauges | 10-02-2007 03:20 PM |
[QUOTE=designfate;19558255]any word on the green 60mm gauges? My eyes are so bad that i need the bigger gauges... :([/QUOTE]
No plans right now for 60mm gauges in Green.
No plans right now for 60mm gauges in Green.
| jscro | 10-02-2007 04:13 PM |
Picked up a Prosport Premium Boost Gauge. Easy install, and a great product.
| designfate | 10-02-2007 08:52 PM |
sweet, i just picked one up last night. Cant wait....now just gotta find a gauge pod for it. Then ill buy the other gauges :lol:
| Prosport Gauges | 10-03-2007 01:37 PM |
[QUOTE=jscro;19565168]Picked up a Prosport Premium Boost Gauge. Easy install, and a great product.[/QUOTE]
Thanks for the feedback !!
Thanks for the feedback !!
| parat75 | 10-03-2007 06:33 PM |
I just ordered a prosport mechanical boost guage...does it read low too??
| Prosport Gauges | 10-05-2007 08:40 AM |
no -they are very accurate
| Hooligan_22 | 10-05-2007 09:17 AM |
[QUOTE=DanWRX;19558319]Got my gauges from Ultimate CC a month or so ago. Everything works great, except the boost gauge reads 1-1.5psi low. Also one thing I figured out incase it hasn't been posted here, is that if you want to reset the peak on a premium gauge:
Press the peak button so it goes into peak mode
Hold the peak button until it starts flashing
Wait until it stops flashing and goes back into normal mode[/QUOTE]
How can you say the gauge works great if it does not read the correct amount? That is the whole point.
Is this normal/common for the electrical Prosports? I had another brand of gauge that looked very similar that also read incorrectly. A second gauge and sender showed a similar problem on my car (also off, but the other way). Am I going to have that same problem here?
Press the peak button so it goes into peak mode
Hold the peak button until it starts flashing
Wait until it stops flashing and goes back into normal mode[/QUOTE]
How can you say the gauge works great if it does not read the correct amount? That is the whole point.
Is this normal/common for the electrical Prosports? I had another brand of gauge that looked very similar that also read incorrectly. A second gauge and sender showed a similar problem on my car (also off, but the other way). Am I going to have that same problem here?
| Prosport Gauges | 10-05-2007 10:40 AM |
This has been addressed before...
Also the previous question was regarding Mechanical boost-you quoted a Electrical boost question/comment. Apples and oranges.
Keep in mind the boost gauges reads relative pressure..meaning where you are in the world will affect your reading.
Also the previous question was regarding Mechanical boost-you quoted a Electrical boost question/comment. Apples and oranges.
Keep in mind the boost gauges reads relative pressure..meaning where you are in the world will affect your reading.
| djerickd | 10-06-2007 03:08 AM |
Would you ever consider doing a custom yellow needle for us 02-03 owners? u open today?
| Prosport Gauges | 10-06-2007 07:41 PM |
we will consider..
we are open M-F 9-5 EST.
we are open M-F 9-5 EST.
| djerickd | 10-07-2007 01:54 AM |
I'll call you Monday! :)
| bmw50021 | 10-07-2007 01:58 AM |
Should the gauge usually differ from what my ecu reads? 20.75 psi logged with enginuity shows up as like 22 psig on my 60mm electric peak prosport boost gauge.
| bmw50021 | 10-07-2007 02:00 AM |
oh also, is there a way to stop the opening ceremony beep, but keep the warning beep? it gets a little annoying everytime i start the car.
| djerickd | 10-07-2007 02:03 AM |
this is on the site:
[QUOTE]Q: I have Premium Series Gauges with Warning and Peak recall, how do I silence the warning beep?
A: Simple- Push and hold the button-Turn on the ignition-wait for the ceremony to finish- release button.[/QUOTE]
[QUOTE]Q: I have Premium Series Gauges with Warning and Peak recall, how do I silence the warning beep?
A: Simple- Push and hold the button-Turn on the ignition-wait for the ceremony to finish- release button.[/QUOTE]
| bmw50021 | 10-07-2007 06:09 AM |
[QUOTE=djerickd;19614154]this is on the site:[/QUOTE]
notice how i asked to silence the opening ceremony beep - and NOT the warning beep? reading ftw.
notice how i asked to silence the opening ceremony beep - and NOT the warning beep? reading ftw.
| djerickd | 10-07-2007 09:23 AM |
oopsie :lol:
| quadtard | 10-08-2007 11:32 AM |
My boost gauge is reading about 4psi high. I am going to send the boost sender back, as told by your secretary. I hope a new sender fixes the problem. Other than that, I am very satisfied with these gauges.
| djerickd | 10-08-2007 11:36 AM |
[QUOTE=Prosport Gauges;19612077]we will consider..
we are open M-F 9-5 EST.[/QUOTE]
Hey there, I was wondering how to discuss more about this, I called and they asked me to e-mail you. was this Glenn I assume?
we are open M-F 9-5 EST.[/QUOTE]
Hey there, I was wondering how to discuss more about this, I called and they asked me to e-mail you. was this Glenn I assume?
| java04rexracr | 10-12-2007 01:06 PM |
Ordered three gauges and they were shipped out within 30 minutes of the order. +1
Very nice woman on the phone. +1
Very nice woman on the phone. +1
| djerickd | 10-12-2007 01:22 PM |
I'm driving over there in a bit and checking out the facility :)
| snobrder_ad | 10-12-2007 03:40 PM |
has anyone had any problems with install (such as depth) with the defi clock pod?
(going electrical gauges if that matters...)
(going electrical gauges if that matters...)
| Prosport Gauges | 10-12-2007 06:55 PM |
[QUOTE=djerickd;19624271]Hey there, I was wondering how to discuss more about this, I called and they asked me to e-mail you. was this Glenn I assume?[/QUOTE]
OK, I have looked into this and it can be done. I need a few things. This will be a fully custom order and more than likely I will make only three gauges. Boost, OP, EGT -? (taking suggestions)
I see you are in Tampa?? I am going to need to see-or better yet get a sample of the pointer so I can match the color. Anyone have or can get me one??
OK, I have looked into this and it can be done. I need a few things. This will be a fully custom order and more than likely I will make only three gauges. Boost, OP, EGT -? (taking suggestions)
I see you are in Tampa?? I am going to need to see-or better yet get a sample of the pointer so I can match the color. Anyone have or can get me one??
| Prosport Gauges | 10-12-2007 06:58 PM |
[QUOTE=bmw50021;19614767]notice how i asked to silence the opening ceremony beep - and NOT the warning beep? reading ftw.[/QUOTE]
No it cannot be done. it is either on or off.
No it cannot be done. it is either on or off.
| Prosport Gauges | 10-12-2007 07:00 PM |
[QUOTE=java04rexracr;19677258]Ordered three gauges and they were shipped out within 30 minutes of the order. +1
Very nice woman on the phone. +1[/QUOTE]
Awesome.. Glad you are happy. Our normal fill rate for orders in stock is about 1 hour during business hours.
Very nice woman on the phone. +1[/QUOTE]
Awesome.. Glad you are happy. Our normal fill rate for orders in stock is about 1 hour during business hours.
| djerickd | 10-13-2007 12:43 AM |
[QUOTE=Prosport Gauges;19681560]OK, I have looked into this and it can be done. I need a few things. This will be a fully custom order and more than likely I will make only three gauges. Boost, OP, EGT -? (taking suggestions)
I see you are in Tampa?? I am going to need to see-or better yet get a sample of the pointer so I can match the color. Anyone have or can get me one??[/QUOTE]
Yeah I'm local to you, I was at your offices today.. I met the ladies, and I picked up some header wrap and went ahead and got an EGT and Boost gauges to try out. I'm only looking for boost and EGT myself on the custom 02-03 style set.. I can stop by when you are in and you can take a look at mine. lemme know! I heard u were in Taiwan :cool:
Erick
I see you are in Tampa?? I am going to need to see-or better yet get a sample of the pointer so I can match the color. Anyone have or can get me one??[/QUOTE]
Yeah I'm local to you, I was at your offices today.. I met the ladies, and I picked up some header wrap and went ahead and got an EGT and Boost gauges to try out. I'm only looking for boost and EGT myself on the custom 02-03 style set.. I can stop by when you are in and you can take a look at mine. lemme know! I heard u were in Taiwan :cool:
Erick
| Prosport Gauges | 10-13-2007 12:30 PM |
OK, sounds good. I will be back in town in about 11 days..we will try to arrange something quick before I head off to SEMA.
| JiveMasterT | 10-13-2007 02:09 PM |
Your domain expired...
| djerickd | 10-13-2007 03:10 PM |
[QUOTE=JiveMasterT;19687065]Your domain expired...[/QUOTE]
oh crap it did!!! :eek:
oh crap it did!!! :eek:
| djerickd | 10-15-2007 02:47 PM |
edit: I fixed it!
Không có nhận xét nào:
Đăng nhận xét