| downsti | 04-29-2007 01:43 PM |
i have the premium gauge
and i had to replace my egt probe twice , it jus burns out
is there anyway i can get like a after market EGT probe?
and if thats the case
then can i jus use any other brand of gauge EGT probe
thanks
and i had to replace my egt probe twice , it jus burns out
is there anyway i can get like a after market EGT probe?
and if thats the case
then can i jus use any other brand of gauge EGT probe
thanks
| Ultimate Collision Center | 04-29-2007 04:31 PM |
i believe we spoke on the phone let me know if that works out for you...
| downsti | 04-29-2007 07:14 PM |
[QUOTE=ULTIMATE CC;17896917]i believe we spoke on the phone let me know if that works out for you...[/QUOTE]
yea i reply to the other post i made on the other prosport thread
sorry for posting it up too much
jus kinda frustrated
but now i know whats goin on
""yup dan thats me that talked to you over the phone
i posted it up before we talked
now i understand the situation and why it gets damage
cuz i love my prosport gauges proll best gauges out right now
price and quality wise i have no problem with my boost or my oil pressure gauge
im goin to contact glen over at prosport about the probe switch
when my EGT is working right, its def very accurate it help me out alot on tuning and keeping an eye on bad gas or leaning out
thanks dan for the help
i highly recogmend ULITIMATE CC for your prosport needs
very very good service ""
thanks again
yea i reply to the other post i made on the other prosport thread
sorry for posting it up too much
jus kinda frustrated
but now i know whats goin on
""yup dan thats me that talked to you over the phone
i posted it up before we talked
now i understand the situation and why it gets damage
cuz i love my prosport gauges proll best gauges out right now
price and quality wise i have no problem with my boost or my oil pressure gauge
im goin to contact glen over at prosport about the probe switch
when my EGT is working right, its def very accurate it help me out alot on tuning and keeping an eye on bad gas or leaning out
thanks dan for the help
i highly recogmend ULITIMATE CC for your prosport needs
very very good service ""
thanks again
| MrSlowbaru | 04-29-2007 07:27 PM |
i got the green/white electrical boost and egt from ultimate CC and they kick ass for the price. they are mad bright and they match my oem cluster. and if you wire them differently they will light up red like the sti clusters (incase you decide to change your cluster colors)
my advice to you above who have trouble deciding between mec boost and elec boost. get the electrical boost. it is way more responsive than my autometer gauges that i used to have, and its dead silent. not to mention it is possibly the cheapest elec boost gauge ever.
my advice to you above who have trouble deciding between mec boost and elec boost. get the electrical boost. it is way more responsive than my autometer gauges that i used to have, and its dead silent. not to mention it is possibly the cheapest elec boost gauge ever.
| Ultimate Collision Center | 04-29-2007 08:53 PM |
thanks for the kind words...
| ptirmal | 04-30-2007 10:53 AM |
Do the premium gauges only come in electrical? I assume it only does the starting sweep in an electrical gauge, right?
| Ultimate Collision Center | 04-30-2007 10:55 AM |
all gauges do the sweep, and yes premium only come in electric...
| Unlikely Hero | 04-30-2007 12:22 PM |
[quote=Unlikely Hero;17803845]I've been having trouble with my electric boost gauge. When the car is off, but keyed on, the needle doesn't stop at 0 but a little below. Also when idleing, I'm getting 22in sometimes and 20 other times. Also if I switch the lights on and off, it makes the boost needle jump. Lastly how do you get all three gauges to sweep at the same time. mine do all at different times during startup.
=Jason-[/quote]
bump, anyone else have problems like this???
=J-
=Jason-[/quote]
bump, anyone else have problems like this???
=J-
| flimflamman | 04-30-2007 12:47 PM |
Subscribing...
| ZACKARU | 05-01-2007 02:28 AM |
I can't figure out how to wire my gauges so they are different durring the day/night. I have the white/green gauges in the clock pod location, thought I could use the illumination from the clock to change colors, but doesn't work. I currently can only get one color at a time. Any help is greatly appreciated.
| hella_sti | 05-01-2007 11:58 AM |
<---still waiting for the 60mm green/white to come out...
| Mechie3 | 05-01-2007 12:03 PM |
:cough: blue 60mm :cough:
(I know, no plans for them......)
(I know, no plans for them......)
| Ultimate Collision Center | 05-01-2007 12:05 PM |
Im still waiting to get them :)
| hella_sti | 05-01-2007 12:13 PM |
[quote=ULTIMATE CC;17919275]Im still waiting to get them :)[/quote]
how about a preorder? Do you have an initial price on them as of yet?
how about a preorder? Do you have an initial price on them as of yet?
| Ultimate Collision Center | 05-01-2007 03:22 PM |
im not doing a preorder yet till i get a firm date...
| Ultimate Collision Center | 05-01-2007 03:28 PM |
Heres pics of the digital tach and shiftlight...its a pretty sweet unit...
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach001.jpg[/IMG]
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach002.jpg[/IMG]
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach003.jpg[/IMG]
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach001.jpg[/IMG]
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach002.jpg[/IMG]
[IMG]http://www.ultimate-cc.com/images/Prosport/prosportshiftlighttach003.jpg[/IMG]
| roccer | 05-01-2007 06:03 PM |
im still debating between mech and electric boost gauge.... wont have money for them either way for a week or so (need to buy several books for school and they aint cheap...) which one is "easier" to install for a relative green DIY'er like myself?
the prices are only like ~$20 different so it will probably come down to a coin flip once i have the money on hand.
the prices are only like ~$20 different so it will probably come down to a coin flip once i have the money on hand.
| Ultimate Collision Center | 05-01-2007 06:11 PM |
mech is always easier to install...let me know got both instock, do you go to RIT, if so i go to SUNY geneseo...I will be going to the track this wednesday and friday over at NYIRP.com
| ptirmal | 05-01-2007 09:23 PM |
What exactly are the peak and hold functions of the premiums, I couldn't find much info on the website
| Ultimate Collision Center | 05-02-2007 12:12 PM |
they give you the ability to set a limit say for boost, if it goes over it will beep and flash a different color to warn you and it also gives you the ability to play back what you just ran, so if your tuning you can see what your peak boost was or egt...
| JLwrx06 | 05-03-2007 09:11 AM |
does anyone know where I can get a pod for just 2 gauges. I am interested in the 52mm prosport egt along with oil temp or pressure. I was looking on the prosport site and they didn't have a pod. thanks. help would be appreciated.
| Fred Fredburger | 05-03-2007 09:40 AM |
What about the Autometer dash bezel?
[url=http://www.flat-four.com/gallery/other_images-gauges/Lights_Off?full=1][img]http://www.flat-four.com/gallery/albums/other_images-gauges/Lights_Off.thumb.jpg[/img][/url]
I got mine from Oakos (link [url=http://www.oakos.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=355&Product_Code=AUT20015&Category_Code=3400][u]here[/u][/url]).
[url=http://www.flat-four.com/gallery/other_images-gauges/Lights_Off?full=1][img]http://www.flat-four.com/gallery/albums/other_images-gauges/Lights_Off.thumb.jpg[/img][/url]
I got mine from Oakos (link [url=http://www.oakos.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=355&Product_Code=AUT20015&Category_Code=3400][u]here[/u][/url]).
| vikingRS | 05-03-2007 09:59 AM |
How is the fit of the gauges in the dash bezel? I'm disappointed with the fit in the prosport gauge cup, it flops around in there, even with additional rubber bands on it.
| Fred Fredburger | 05-03-2007 10:10 AM |
[quote=vikingRS;17945699]How is the fit of the gauges in the dash bezel? I'm disappointed with the fit in the prosport gauge cup, it flops around in there, even with additional rubber bands on it.[/quote]
The fit isn't bad, but it's not factory. The top of the bezel seems to be a little shinier than the factory bezel, so you get some reflection from the gauges (you can see it in the image). It stuck out like a sore thumb when I first installed the bezel, but after a little while I completely forgot about it. I think it would be pretty simple to spray some flat black on the inside top of the bezel if you never forget about it.
The other problem with that bezel is that if you're planning on keeping the gaueges mounted straight (with the top of the gauge at 12 o'clock) you will need to use an extra piece of metal to mount the prosport u-bracket. The bracket mounts on the gauges between 3 and 9 o'clock and there wasn't room for it with the bezel. I didn't want to dremel my u-bracket, but I believe you can mount the u-bracket between 1 and 7 o'clock, but you'll need to get a little piece of metal to go between the mounting posts.
The fit isn't bad, but it's not factory. The top of the bezel seems to be a little shinier than the factory bezel, so you get some reflection from the gauges (you can see it in the image). It stuck out like a sore thumb when I first installed the bezel, but after a little while I completely forgot about it. I think it would be pretty simple to spray some flat black on the inside top of the bezel if you never forget about it.
The other problem with that bezel is that if you're planning on keeping the gaueges mounted straight (with the top of the gauge at 12 o'clock) you will need to use an extra piece of metal to mount the prosport u-bracket. The bracket mounts on the gauges between 3 and 9 o'clock and there wasn't room for it with the bezel. I didn't want to dremel my u-bracket, but I believe you can mount the u-bracket between 1 and 7 o'clock, but you'll need to get a little piece of metal to go between the mounting posts.
| RexisMe | 05-03-2007 11:32 AM |
I dont want to read every single post. So, what is the general consensus about these gauges? worth the money? or would the maddads be a better decision.
| Ultimate Collision Center | 05-03-2007 02:22 PM |
theres people that have issues with them, but its 99.9% from either shipping or install errors and either way they are always warranteed, I have sold over a thousand gauges this spring so far and have had 3 warrantee claims, one shipping and two install...i started selling them after I bought a set for my personal car, couldn't believe the quality for the money...
| AllAWD | 05-03-2007 03:35 PM |
[QUOTE=RexisMe;17946990]I dont want to read every single post. So, what is the general consensus about these gauges? worth the money? or would the maddads be a better decision.[/QUOTE]
I was in the same boat as you. For the price difference it's hard not to take a shot at prosport. I saved over $100 buying my 2 prosport gauges over Maddad.
I haven't got mine yet, but my thinking is when things are bad, people complain a lot. Lots of people run these gauges and the problems reported seem few and the flaws (original EGT probe burning out) were corrected/upgraded by Prosport.
I was in the same boat as you. For the price difference it's hard not to take a shot at prosport. I saved over $100 buying my 2 prosport gauges over Maddad.
I haven't got mine yet, but my thinking is when things are bad, people complain a lot. Lots of people run these gauges and the problems reported seem few and the flaws (original EGT probe burning out) were corrected/upgraded by Prosport.
| RexisMe | 05-04-2007 08:42 AM |
[QUOTE=AllAWD;17950149]I was in the same boat as you. For the price difference it's hard not to take a shot at prosport. I saved over $100 buying my 2 prosport gauges over Maddad.
I haven't got mine yet, but my thinking is when things are bad, people complain a lot. Lots of people run these gauges and the problems reported seem few and the flaws (original EGT probe burning out) were corrected/upgraded by Prosport.[/QUOTE]
ya, well, i guess maybe i will give them a try. I dont know, i always believed in you get what you pay for. I would rather pay more money and not have any headaches than well.. ya know.
I haven't got mine yet, but my thinking is when things are bad, people complain a lot. Lots of people run these gauges and the problems reported seem few and the flaws (original EGT probe burning out) were corrected/upgraded by Prosport.[/QUOTE]
ya, well, i guess maybe i will give them a try. I dont know, i always believed in you get what you pay for. I would rather pay more money and not have any headaches than well.. ya know.
| 4sevens | 05-04-2007 09:34 AM |
[quote=o2sys;17470162]ok mine is busted and i have no idea how. One day i turn it on, it does the sweep, the the needle pegs to 26PSI and keeps flashing different colors....had it for about 1 week....[/quote]
Mine does this after a 40 minute drive (highway)
any suggetions?
Mine does this after a 40 minute drive (highway)
any suggetions?
| Ultimate Collision Center | 05-04-2007 10:22 AM |
the only issues with these gauges are the installers...yes there are a few dead sensors but I haven't had 2 of those in the hundreds of gauges I have sold...if its pegging to 26psi then its likely a bad wire connection as thats a default setting typically...
| 4sevens | 05-04-2007 10:26 AM |
[quote=ULTIMATE CC;17958753]the only issues with these gauges are the installers...yes there are a few dead sensors but I haven't had 2 of those in the hundreds of gauges I have sold...if its pegging to 26psi then its likely a bad wire connection as thats a default setting typically...[/quote]
Heres the strange thing. This ONLY happens after driving for 40 minutes
or more. It gets stuck there as long as the engine is running. I've
tried jiggling the sensor and the connectors.
Heres the thing. If I turn off the ignition and wait 1 minute, it
begins to operate normally, but after a little while longer, it does the
same thing.
If I turn it off and back on immediately, sometimes it gets stuck still.
Though opening ceremony works fine.
This tells me that it's not a wiring issue. I suspect maybe a heat
issue affecting the sensor. I've really banged my head over this
and checked all the connections.
Again, this doesn't happen unless I've driving about 40 miles. It's just
really annoying :(
Maybe it's a stressed wire that becomes disconnected when it heats up?
:shrug: Maybe I'll rewire everything again when I have time. :(
Heres the strange thing. This ONLY happens after driving for 40 minutes
or more. It gets stuck there as long as the engine is running. I've
tried jiggling the sensor and the connectors.
Heres the thing. If I turn off the ignition and wait 1 minute, it
begins to operate normally, but after a little while longer, it does the
same thing.
If I turn it off and back on immediately, sometimes it gets stuck still.
Though opening ceremony works fine.
This tells me that it's not a wiring issue. I suspect maybe a heat
issue affecting the sensor. I've really banged my head over this
and checked all the connections.
Again, this doesn't happen unless I've driving about 40 miles. It's just
really annoying :(
Maybe it's a stressed wire that becomes disconnected when it heats up?
:shrug: Maybe I'll rewire everything again when I have time. :(
| Ultimate Collision Center | 05-04-2007 10:41 AM |
Man thats a strange issue, where do you have the sensor located, heat could possibly be affecting it but I doubt it since the car after 10 mins of driving is as hot as its going to get unless you are abusing the snot out of it...keep me updated when you try and rewire it or figure out the issue, this is not normal and should not be happening, I will try to brainstorm a bit and see if I can think of a plausable explanation of this occurence...
| Ultimate Collision Center | 05-06-2007 08:04 PM |
Here is another customers of mine...
[IMG]http://img.photobucket.com/albums/v57/idi0t/DSC00083.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v57/idi0t/DSC00083.jpg[/IMG]
| TK421 | 05-06-2007 08:16 PM |
How do you turn the gauge on mute? i have the premium boost gauge.
I was told by prosport to hold the set button down, turn the ignition on, keep holding it down til the gauge does its opening ceremony/sweep and when its done release the button. But it does nothing
I was told by prosport to hold the set button down, turn the ignition on, keep holding it down til the gauge does its opening ceremony/sweep and when its done release the button. But it does nothing
| SimonJ | 05-06-2007 08:24 PM |
how do these gauges compare to say, DEFI?
| Prosport Gauges | 05-07-2007 06:13 PM |
[QUOTE=iheartscoobys;17978689]How do you turn the gauge on mute? i have the premium boost gauge.
I was told by prosport to hold the set button down, turn the ignition on, keep holding it down til the gauge does its opening ceremony/sweep and when its done release the button. But it does nothing[/QUOTE]
I am guessing that you do not have your red wire connected to constant 12v power. ie the gauge will not retain memory. so it does not remember what your setting is after you turn off your car. So, follow the directions and connect the red wire to constant 12v power and the problem will be fixed. :banana:
I was told by prosport to hold the set button down, turn the ignition on, keep holding it down til the gauge does its opening ceremony/sweep and when its done release the button. But it does nothing[/QUOTE]
I am guessing that you do not have your red wire connected to constant 12v power. ie the gauge will not retain memory. so it does not remember what your setting is after you turn off your car. So, follow the directions and connect the red wire to constant 12v power and the problem will be fixed. :banana:
| roccer | 05-07-2007 06:49 PM |
just ordered a green/white boost gauge :banana: .... now to figure out where I should mount it (also ordered the Prosport gauge cup for mounting..) any suggestions of where to stick it?
this'll actually be my first "mod" so it should be fun
this'll actually be my first "mod" so it should be fun
| Ultimate Collision Center | 05-07-2007 06:51 PM |
woot woot, should have it tomorrow I would assume...
| roccer | 05-07-2007 07:36 PM |
[QUOTE=ULTIMATE CC;17991010]woot woot, should have it tomorrow I would assume...[/QUOTE]
tomorrow?! DAMN that would be fast :banana:
and theres too many dancing bananas now on my screen thanks to my previous post and the other post(s) :)
tomorrow?! DAMN that would be fast :banana:
and theres too many dancing bananas now on my screen thanks to my previous post and the other post(s) :)
| Ultimate Collision Center | 05-07-2007 07:39 PM |
well if your Rochester then you should have it by tomorrow afternoon...
| AllAWD | 05-11-2007 11:55 AM |
Just got my green/white Boost and EGT. Fedex sure is slow, but I can't fault Dan. He had it ready to go.
Now to figure out which wires to tap. Anyone got a link to install instructions?
I'll be searching.
Now to figure out which wires to tap. Anyone got a link to install instructions?
I'll be searching.
| ptirmal | 05-11-2007 12:38 PM |
[QUOTE=AllAWD;18039232]Just got my green/white Boost and EGT. Fedex sure is slow, but I can't fault Dan. He had it ready to go.
Now to figure out which wires to tap. Anyone got a link to install instructions?
I'll be searching.[/QUOTE]
check out the gauge faq, there are a few writeups linked
Now to figure out which wires to tap. Anyone got a link to install instructions?
I'll be searching.[/QUOTE]
check out the gauge faq, there are a few writeups linked
| roccer | 05-12-2007 10:36 AM |
just got my gauge! time to install :)
| roccer | 05-12-2007 04:43 PM |
install pics (sorry they are a bit big... forgot to resize before uploading. :(
"eye height" view. lose the odomoder from head on, and the far part of the spedo, but i rarely if ever sweep the needle that far :devil: so it works for now....
did the white for day/ green for night wiring.
[IMG]http://i3.tinypic.com/6cg2mtu.jpg[/IMG]
angle shot (sticky tape FTW!) as i didnt want to drill anything for now and the standard mounting bracket made the gauge too tall. so i cut the feet off it :)
[IMG]http://i6.tinypic.com/4ts5d2p.jpg[/IMG]
passenger side shot (obviously)
[IMG]http://i2.tinypic.com/4v81i80.jpg[/IMG]
and my craptastic T-fitting job
[IMG]http://i10.tinypic.com/4qsb1on.jpg[/IMG]
all and all im happy :) :banana:
"eye height" view. lose the odomoder from head on, and the far part of the spedo, but i rarely if ever sweep the needle that far :devil: so it works for now....
did the white for day/ green for night wiring.
[IMG]http://i3.tinypic.com/6cg2mtu.jpg[/IMG]
angle shot (sticky tape FTW!) as i didnt want to drill anything for now and the standard mounting bracket made the gauge too tall. so i cut the feet off it :)
[IMG]http://i6.tinypic.com/4ts5d2p.jpg[/IMG]
passenger side shot (obviously)
[IMG]http://i2.tinypic.com/4v81i80.jpg[/IMG]
and my craptastic T-fitting job
[IMG]http://i10.tinypic.com/4qsb1on.jpg[/IMG]
all and all im happy :) :banana:
| flimflamman | 05-13-2007 10:47 AM |
Nice pics. I don't blame you for the sticky tape mount. Easy clean removal later on.
| G3Red04WRX | 05-13-2007 10:56 AM |
[QUOTE=ULTIMATE CC;17949153]theres people that have issues with them, but its 99.9% from either shipping or install errors and either way they are always warranteed, I have sold over a thousand gauges this spring so far and have had 3 warrantee claims, one shipping and two install...i started selling them after I bought a set for my personal car, couldn't believe the quality for the money...[/QUOTE]
Just to add my .02, I bought mine from Mach V, got elec. boost, egt, op. I ended up with one of the bad EGT sensors. Called Prosport up directly, they took my cc number for reference and sent me out a new probe that day. Had it by the end of the week, look and overall quality of the new probe was night and day to the original one (much beefier connections and wire protection). Took the old one out, wired up the new one and everything worked perfectly. Put the old one back in the same packaging they sent the new one in and shipped it back to them. Never even charged my card thru the whole process cause it was so fast. Prosoprt Gauges definitely has top notch customer service, and once i have a need for another gauge or 2, im definitely putting another order in with them. They really are the best value for the dollar.
Just to add my .02, I bought mine from Mach V, got elec. boost, egt, op. I ended up with one of the bad EGT sensors. Called Prosport up directly, they took my cc number for reference and sent me out a new probe that day. Had it by the end of the week, look and overall quality of the new probe was night and day to the original one (much beefier connections and wire protection). Took the old one out, wired up the new one and everything worked perfectly. Put the old one back in the same packaging they sent the new one in and shipped it back to them. Never even charged my card thru the whole process cause it was so fast. Prosoprt Gauges definitely has top notch customer service, and once i have a need for another gauge or 2, im definitely putting another order in with them. They really are the best value for the dollar.
| Ultimate Collision Center | 05-13-2007 01:00 PM |
looks great buddy...
| AllAWD | 05-16-2007 10:12 PM |
Thanks to ULTIMATE CC I got some nice gauges. Prosport needs to make a cluster light kit since the OEM cluster is pathetically dim.
[IMG]http://i130.photobucket.com/albums/p271/allawd/PICT0077.jpg[/IMG]
[IMG]http://i130.photobucket.com/albums/p271/allawd/PICT0076.jpg[/IMG]
[IMG]http://i130.photobucket.com/albums/p271/allawd/PICT0077.jpg[/IMG]
[IMG]http://i130.photobucket.com/albums/p271/allawd/PICT0076.jpg[/IMG]
| roccer | 05-16-2007 10:41 PM |
update: remounted my gauge. this time with a little brace i made (seen in the first pic) to hold it against the steering column. from this angle and with the flash it looks a bit more jagged and unprofesional as it does in person. but its in an area almost no one will ever see (wiper arm all the way down so you can see it in pic one. that piece + super sticky 3M double stick tape FTW!)
then some night pics with the gauge lit (OEM dash is so dim in comparison...)
[IMG]http://i9.tinypic.com/4v495s1.jpg[/IMG]
[IMG]http://i5.tinypic.com/4px7fxu.jpg[/IMG]
[IMG]http://i6.tinypic.com/4mjh01h.jpg[/IMG]
and yes, in mid may in Rochester, its 46 out..... global warming my ass.
[IMG]http://i13.tinypic.com/61krvjq.jpg[/IMG]
[IMG]http://i2.tinypic.com/4yrycyw.jpg[/IMG]
then some night pics with the gauge lit (OEM dash is so dim in comparison...)
[IMG]http://i9.tinypic.com/4v495s1.jpg[/IMG]
[IMG]http://i5.tinypic.com/4px7fxu.jpg[/IMG]
[IMG]http://i6.tinypic.com/4mjh01h.jpg[/IMG]
and yes, in mid may in Rochester, its 46 out..... global warming my ass.
[IMG]http://i13.tinypic.com/61krvjq.jpg[/IMG]
[IMG]http://i2.tinypic.com/4yrycyw.jpg[/IMG]
| Ultimate Collision Center | 05-16-2007 10:56 PM |
looks great buddy...
| flimflamman | 05-17-2007 08:09 AM |
[quote=ULTIMATE CC;18099040]looks great buddy...[/quote]
Do you still have these in stock?
Do you still have these in stock?
| Ultimate Collision Center | 05-17-2007 12:41 PM |
pm me what you are looking for and I should have it, only missing a couple gauges here and there that are backordered...
| flimflamman | 05-17-2007 05:46 PM |
[quote=ULTIMATE CC;18104191]pm me what you are looking for and I should have it, only missing a couple gauges here and there that are backordered...[/quote]
PM sent. Thanks.
PM sent. Thanks.
| Ultimate Collision Center | 05-28-2007 01:38 PM |
pm returned ;)
| Dragonbreak | 05-28-2007 04:35 PM |
Any word of 60mm Premium gauges?
| Ultimate Collision Center | 05-28-2007 04:40 PM |
they are arriving at prosport any day now and when they do ill have some shortly...
| DRFTMX5 | 05-28-2007 04:51 PM |
those look sick. I might have to get me some.
| Ultimate Collision Center | 05-28-2007 04:54 PM |
just let me know...
| StiPete | 05-28-2007 04:59 PM |
Is it possible to turn off the loud beep that these gauges make upon start-up?
I'd like to be able to stop them from doing this forever.
Thanks
I'd like to be able to stop them from doing this forever.
Thanks
| Prosport Gauges | 05-29-2007 08:40 AM |
[QUOTE=Dragonbreak;18214865]Any word of 60mm Premium gauges?[/QUOTE]
They just arrived!! Boost, Oil Press., EGT, and Water Temp -Amber/White Premium Series.60mm!!
They just arrived!! Boost, Oil Press., EGT, and Water Temp -Amber/White Premium Series.60mm!!
Không có nhận xét nào:
Đăng nhận xét