| Madson26 | 01-31-2007 04:41 PM |
got them ordered!!! thanks!
| G3Red04WRX | 02-01-2007 12:55 PM |
Any word on a green/white color combo for 2" voltage gauge? I miss my voltmeter / exterior temp gauge that i had customed into my clock pod that i had to remove to install my 3 prosport gauges i bought. Im thinking gauge cluster bezel with voltage on left and one more gauge (not sure what yet) on the right. If these are going to be available anytime soon, i dont mind pre-ordering ahead to guarantee one from the first shipment to come in.
| Ziggyrama | 02-04-2007 01:47 PM |
Ok, I promised pics a while ago and I finally got around to taking them. They're the WRX white/green series, EGT and oil pressure:
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges1.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges2.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges3.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges4.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges1.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges2.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges3.JPG[/IMG]
[IMG]http://mysite.verizon.net/ziggyrama1/NASIOC/Gauges/gauges4.JPG[/IMG]
| JiveMasterT | 02-04-2007 02:05 PM |
Any more word on the wideband a/f gauge?
| El Supremo | 02-04-2007 03:07 PM |
60mm stepdown 52mm won't fit Lotek Pillar Pod
�
�
[QUOTE=bajozzy;16872935]Is there any fitment issues with the 60MM prosports being too deep for the defi triple dash pod. Thats my plan...Is it going to fit ??[/QUOTE]
Howdy,
The Prosport 60mm step-down to 52mm gauges won't fit into the 52mm Lotek 3-gauge pillar pod. The faces on the 60mm gauges are too wide to angle into the hole without bumping on the next pod above/below. That coupled with the 2.5" gauge barrel length made it an impossible fitment without doing serious damage to the Lotek pod or the 60mm/52mm Prosport stepdown gauges. I returned the 3-gauge pillar pod to Lotek after two days and got a refund. [COLOR="Red"]It cost me $22.00 in shipping, handling and restocking fees to find out the above (hardway) information .[/COLOR]
I was also thinking about the Autometer ATM-20018 52mm 3-gauge dash pod on e-gauges:
[url]http://www.egauges.com/vdo_acce.asp?Subgroup=WRX_Dash[/url]
but it's someone else's turn to do research :).
Supremo
Howdy,
The Prosport 60mm step-down to 52mm gauges won't fit into the 52mm Lotek 3-gauge pillar pod. The faces on the 60mm gauges are too wide to angle into the hole without bumping on the next pod above/below. That coupled with the 2.5" gauge barrel length made it an impossible fitment without doing serious damage to the Lotek pod or the 60mm/52mm Prosport stepdown gauges. I returned the 3-gauge pillar pod to Lotek after two days and got a refund. [COLOR="Red"]It cost me $22.00 in shipping, handling and restocking fees to find out the above (hardway) information .[/COLOR]
I was also thinking about the Autometer ATM-20018 52mm 3-gauge dash pod on e-gauges:
[url]http://www.egauges.com/vdo_acce.asp?Subgroup=WRX_Dash[/url]
but it's someone else's turn to do research :).
Supremo
| [email�protected] | 02-05-2007 06:49 PM |
I just got my replacement boost sensor, and I still am getting the same thing, pinned at -30 hg, no flashing "fault" mode.
Is it possable the connectors the gauge came with are "pinned" out wrong?
Is it possable the connectors the gauge came with are "pinned" out wrong?
| Trigun001 | 02-05-2007 07:17 PM |
Gauges are great! Cant wait to install them. Fast shipping and nice customer service.
| Mach V Dan | 02-05-2007 08:40 PM |
Trigun, I'm not sure if you're one of our customers, but the dual-gauge bezels just came in from the manufacturer. They'll be shipping tomorrow.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| Trigun001 | 02-05-2007 08:44 PM |
I didnt order from you guys. Im thinking about it though, thanks for the help.
| El Supremo | 02-05-2007 10:30 PM |
Mach V,
How about the Main Oil Gallery Plug for the Prosport Oil Pressure Gauge? I believe that's the right adapter. Cancel my order if your having problems shipping it. I need it by 2/13 and I'm in Cali.
Supremo
How about the Main Oil Gallery Plug for the Prosport Oil Pressure Gauge? I believe that's the right adapter. Cancel my order if your having problems shipping it. I need it by 2/13 and I'm in Cali.
Supremo
| Mechie3 | 02-06-2007 10:09 AM |
El Supremo...should have just listed them in the personals and made back your money, or at least not lost $22.
| El Supremo | 02-06-2007 12:34 PM |
I had to pay Lotek $11.00 for shipping and handling just to ship it to me (non-refundable right from the get) just to see if the gauges would fit (they don't). I had to pay a $6.00 charge to ship it back plus a 10% restocking fee ($5.00). By the time I reduce the price of the pillar pod to less than what Lotek sells it (for quick sale) and ship it to someone else, it would be cheaper money and timewise just to return it.
Econ 101, brought to you by...... Supremo
Econ 101, brought to you by...... Supremo
| Mach V Dan | 02-06-2007 02:48 PM |
El,
You're in Chico, right? That shipped today. UPS tracking number in your email inbox.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
[QUOTE=El Supremo;16944720]Mach V,
How about the Main Oil Gallery Plug for the Prosport Oil Pressure Gauge? I believe that's the right adapter. Cancel my order if your having problems shipping it. I need it by 2/13 and I'm in Cali.
Supremo[/QUOTE]
You're in Chico, right? That shipped today. UPS tracking number in your email inbox.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
[QUOTE=El Supremo;16944720]Mach V,
How about the Main Oil Gallery Plug for the Prosport Oil Pressure Gauge? I believe that's the right adapter. Cancel my order if your having problems shipping it. I need it by 2/13 and I'm in Cali.
Supremo[/QUOTE]
| Mach V Dan | 02-06-2007 02:50 PM |
[QUOTE=Trigun001;16943543]I just want my pod.[/QUOTE]
1. Cancel order with other vendor.
2. Order from us (pod in stock!)
3. Get tracking number
4. Profit! (?)
;)
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
1. Cancel order with other vendor.
2. Order from us (pod in stock!)
3. Get tracking number
4. Profit! (?)
;)
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| Mach V Dan | 02-06-2007 02:51 PM |
[[email�protected];16942176]I just got my replacement boost sensor, and I still am getting the same thing, pinned at -30 hg, no flashing "fault" mode.[/QUOTE]
xerox, sounds like you'll need to return the gauge. If you bought it from us, give me a call for a return auth.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
xerox, sounds like you'll need to return the gauge. If you bought it from us, give me a call for a return auth.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| Mach V Dan | 02-06-2007 02:53 PM |
By the way, the majority of customer service calls we get -- on ALL gauges -- are related to user installation problems. Sometimes people wire up power to the wrong wire (constant on vs. switched, for example). Other times people don't hook the sensor to the gauge. Some people mis-understand the way the Subaru dimming circuit works (variable GROUND instead of variable power).
The moral of the story is, check EVERYTHING carefully, using your most objective, scientific eye, before you assume the gauge doesn't work. In most cases, the gauge is just fine, but the install is not...
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
The moral of the story is, check EVERYTHING carefully, using your most objective, scientific eye, before you assume the gauge doesn't work. In most cases, the gauge is just fine, but the install is not...
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| El Supremo | 02-06-2007 03:20 PM |
edit 2/7/07
| [email�protected] | 02-06-2007 05:39 PM |
is the black wire for the clock a variable ground then? would that cause the issue? I may have also gotten a sensor wire that was pinned out wrong...thats the only thing i can think of, everything else is 100% right, ive checked and checked and checked. I bought it right from prosport.
| derekok | 02-06-2007 07:28 PM |
Prosport...do you guys have that sandwich adapter for oil pressure gauge? I just ordered 3 gauges from you guys but forgot to ask about that.
Thanks
Thanks
| G3Red04WRX | 02-06-2007 07:36 PM |
[QUOTE=derekok;16956442]Prosport...do you guys have that sandwich adapter for oil pressure gauge? I just ordered 3 gauges from you guys but forgot to ask about that.
Thanks[/QUOTE]
Ill save you the time of waiting for an answer from them.
Yes, Prosport sells a sandwich adaptor, and its probably the most affordable one on the market.
You can order direct from them, or from MachV.
Thanks[/QUOTE]
Ill save you the time of waiting for an answer from them.
Yes, Prosport sells a sandwich adaptor, and its probably the most affordable one on the market.
You can order direct from them, or from MachV.
| MERRELL | 02-06-2007 11:05 PM |
is there pictures of the monting brackets that come with the gauges on fastwrx? was just wondering because i want to mount it on the A pillar and wasnt sure if i should order the autometer triple pillar...
| Mach V Dan | 02-07-2007 11:10 AM |
[QUOTE=MERRELL;16959049]is there pictures of the monting brackets that come with the gauges on fastwrx? [/QUOTE]
Can you be more specific? Which gauges/mounting brackets are you referring to?
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
Can you be more specific? Which gauges/mounting brackets are you referring to?
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| killaho | 02-07-2007 01:03 PM |
[QUOTE=Trigun001;16942516]My stupid gauge pod hasnt come in a month. Anoying people, and bad shippinig are so frustrating.[/QUOTE]
+1 I ordered from machV back on the 19th and still no package... took Dan forever to even tell me the bezel was backordered too. Since suposivly they are in stock now send my stuff please Dan!
+1 I ordered from machV back on the 19th and still no package... took Dan forever to even tell me the bezel was backordered too. Since suposivly they are in stock now send my stuff please Dan!
| MERRELL | 02-07-2007 01:26 PM |
[QUOTE=Mach V Dan;16963707]Can you be more specific? Which gauges/mounting brackets are you referring to?
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url][/QUOTE]
the green/white, 52mm, prosport electric boost gauge and EGT gauge.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url][/QUOTE]
the green/white, 52mm, prosport electric boost gauge and EGT gauge.
| Trigun001 | 02-07-2007 09:49 PM |
Ordering some other things prosport gauge related right now!
| Mach V Dan | 02-07-2007 10:04 PM |
Green EGT gauges are on backorder for another 7-8 days.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| Mach V Dan | 02-07-2007 10:11 PM |
[QUOTE=MERRELL;16965666]the green/white, 52mm, prosport electric boost gauge and EGT gauge.[/QUOTE]
I meant, which mounting.
Here's a pic of three of the [url=http://www.fastwrx.com/pr52gacup.html]Prosport gauge cups[/url] with Prosport gauges.
[IMG]http://i6.photobucket.com/albums/y249/danhurwitz/Products/Gauges/Prosportdisplay.jpg[/IMG]
Sorry the color is a little off. The blue gauge looks too purple; the white gauge looks too pink.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
I meant, which mounting.
Here's a pic of three of the [url=http://www.fastwrx.com/pr52gacup.html]Prosport gauge cups[/url] with Prosport gauges.
[IMG]http://i6.photobucket.com/albums/y249/danhurwitz/Products/Gauges/Prosportdisplay.jpg[/IMG]
Sorry the color is a little off. The blue gauge looks too purple; the white gauge looks too pink.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| MERRELL | 02-08-2007 12:39 PM |
im lost here... are you saying that you can pick which mounting brackets you want? [url]http://www.fastwrx.com/prelboga.html[/url]
"Comes complete with vacuum hose, vacuum tee, gauge hood and[B] mounting bracket[/B]. 52mm or 60mm gauge size. And yes, since this gauge is electric and not mechanical, it DOES have the "opening ceremony" behavior when it powers on!
what i was wanting to know is what the brackets look like that come with the gauges...
"Comes complete with vacuum hose, vacuum tee, gauge hood and[B] mounting bracket[/B]. 52mm or 60mm gauge size. And yes, since this gauge is electric and not mechanical, it DOES have the "opening ceremony" behavior when it powers on!
what i was wanting to know is what the brackets look like that come with the gauges...
| KDW | 02-08-2007 01:22 PM |
[QUOTE=Nicholas Mouyos;16737444]i want green/white 60mm :([/QUOTE]
I'd also be interested in 60mm green and white gauges.
I'd also be interested in 60mm green and white gauges.
| Mach V Dan | 02-08-2007 02:02 PM |
[QUOTE=MERRELL;16978792]what i was wanting to know is what the brackets look like that come with the gauges...[/QUOTE]
Ah! That's a sort of U-shaped bracket that goes around the back of the gauge and allows you to clamp it to your gauge mount (or cup, or whatever). You still need the gauge mount.
The bracket is inside the little plastic bag in this picture:
[IMG]http://i6.photobucket.com/albums/y249/danhurwitz/Products/Gauges/Contentselectricboostgauge.jpg[/IMG]
--Dan
Mach V
Ah! That's a sort of U-shaped bracket that goes around the back of the gauge and allows you to clamp it to your gauge mount (or cup, or whatever). You still need the gauge mount.
The bracket is inside the little plastic bag in this picture:
[IMG]http://i6.photobucket.com/albums/y249/danhurwitz/Products/Gauges/Contentselectricboostgauge.jpg[/IMG]
--Dan
Mach V
| MERRELL | 02-08-2007 02:39 PM |
oo...do you guys have a 60mm green/white one?
| [email�protected] | 02-08-2007 02:44 PM |
My prosport gauges work + look great, they do the job for less.
| G3Red04WRX | 02-08-2007 07:07 PM |
Still waiting to hear about a 52mm Volt Gauge in Green/White. When and/or if this will ever be available, please let me know. Thanks.
| Cation | 02-08-2007 07:18 PM |
Ordered my set of 5 yesterday. Blue FTW!!!!
| Trigun001 | 02-08-2007 09:30 PM |
[QUOTE=B1RdMaN03;16984862]Since i'm new to this site I cant post a new thread so i thought i would just post in here about a body kit.
can anyone tell me where i can find a body kit fora 1995 Subaru Legacy L Sedan?[/QUOTE]
Dont do that.... Go find five threads, right something useful and interesting, dont be a moron, and dont hijack other peopls threads. Go into the newbies section and read the stickied info there before you do anything else. Dont mean to be harsh just watch out so u dont get kicked off the site before you get started.
can anyone tell me where i can find a body kit fora 1995 Subaru Legacy L Sedan?[/QUOTE]
Dont do that.... Go find five threads, right something useful and interesting, dont be a moron, and dont hijack other peopls threads. Go into the newbies section and read the stickied info there before you do anything else. Dont mean to be harsh just watch out so u dont get kicked off the site before you get started.
| Mach V Dan | 02-12-2007 10:38 AM |
[QUOTE=MERRELL;16980485]oo...do you guys have a 60mm green/white one?[/QUOTE]
Not currently. Planned for the future, but I can't give you a date.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
Not currently. Planned for the future, but I can't give you a date.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| JiveMasterT | 02-12-2007 10:31 PM |
And uh, bump for some word on the wideband a/f gauges.
| russd32 | 02-13-2007 10:15 AM |
I called Prosport yesterday to ask some questions on guages and I asked about the wideband guage. The guy I talked to said that it will be at least two months on the wideband gauge. He also said that it will be digital, similar to the AFR gauge and it would be priced lower than other widebands. Sounds like it would be worth waiting on.
| G3Red04WRX | 02-13-2007 03:25 PM |
[QUOTE=russd32;17034744]I called Prosport yesterday to ask some questions on guages and I asked about the wideband guage. The guy I talked to said that it will be at least two months on the wideband gauge. He also said that it will be digital, similar to the AFR gauge and it would be priced lower than other widebands. Sounds like it would be worth waiting on.[/QUOTE]
You didnt happen to hear anything about a green/white 52mm volt gauge did you? Im wondering if my question is being ignored. Ive asked several times now without any sort of response.
You didnt happen to hear anything about a green/white 52mm volt gauge did you? Im wondering if my question is being ignored. Ive asked several times now without any sort of response.
| Mach V Dan | 02-13-2007 04:40 PM |
[QUOTE=G3Red04WRX;17039233]You didnt happen to hear anything about a green/white 52mm volt gauge did you? Im wondering if my question is being ignored. Ive asked several times now without any sort of response.[/QUOTE]
Edit: Possible in 2-3 months.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
Edit: Possible in 2-3 months.
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| Matth3w | 02-23-2007 10:23 PM |
[url]http://forums.nasioc.com/forums/showthread.php?p=17160570[/url]
| El Supremo | 03-02-2007 07:15 PM |
The 60mm Prosport Water Temperture Gauge looks and works great. However, not really necessary because the stock, non-numbered, idiot gauge works OK. Plus, a Water Temp. Sender/Radiator Hose Adaptor ($25.00+shipping) is needed to splice into the radiator hose to accommadate the water temp sensing unit (supplied with the kit :)). I bought the 38mm Buddy Club temp. adapter from Evasive Motorsports.
As of this writing, Prosport doesn't sell the adaptors, however they have a "coming soon" ad posted on their webpage.
As of this writing, Prosport doesn't sell the adaptors, however they have a "coming soon" ad posted on their webpage.
| Trigun001 | 03-06-2007 08:14 PM |
Hey prosport I finally got my gauge pod today threw my three gauges in and was pretty upset to find that two of them, my electronic boost, and my electronic oil pressure gauges in white/green were both working but were lighting up both green and white at the same time. I guess this has something to do with the relay in them. All I do is connect the power and ground and they come on a greenish white, opposed to my EGT which comes on red until I tap the color wires. Is there anything I can do or do I just need to send them back to you?
| Mach V Dan | 03-06-2007 08:44 PM |
[QUOTE=Trigun001;17280178]...my electronic oil pressure gauges in white/green were both working but were lighting up both green and white at the same time. [/QUOTE]
I'm not clear on this; you're saying they're lighting up without the lighting wires hooked up? Did you wire them up as the instructions show? What then? The same thing?
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
I'm not clear on this; you're saying they're lighting up without the lighting wires hooked up? Did you wire them up as the instructions show? What then? The same thing?
--Dan
Mach V
[url=www.fastwrx.com]FastWRX.com[/url]
| step down | 03-06-2007 08:51 PM |
Ive had these for about 6 months since I started this thread...still working perfect. Glad to see prosport is coming out new options as well..cheers
| sububu | 03-06-2007 11:43 PM |
nice gauges
| bajozzy | 03-08-2007 10:32 AM |
The sandwich adapter I ordered from prosport with my guages is too big for my 06wrx.
| pasths | 03-08-2007 11:01 AM |
[QUOTE=Trigun001;17280178]Hey prosport I finally got my gauge pod today threw my three gauges in and was pretty upset to find that two of them, my electronic boost, and my electronic oil pressure gauges in white/green were both working but were lighting up both green and white at the same time. I guess this has something to do with the relay in them. All I do is connect the power and ground and they come on a greenish white, opposed to my EGT which comes on red until I tap the color wires. Is there anything I can do or do I just need to send them back to you?[/QUOTE]
I have a similar issue, but I live with it.
I have an on/off/on switch I believe it's called it's been awhile since I put them in.
They default to amber, but during the day it is too dark to see, so I hit the switch then they are white. But, 1 in 3 times one of the 3 gauges sometimes 2 light up with both the white and amber light on causing a more orange look.
Don't know the problem, but it always defaults back to amber on the next start-up. I do have to say for the price I still love them and have worked quite nicely for at least 6 months now.
I have a similar issue, but I live with it.
I have an on/off/on switch I believe it's called it's been awhile since I put them in.
They default to amber, but during the day it is too dark to see, so I hit the switch then they are white. But, 1 in 3 times one of the 3 gauges sometimes 2 light up with both the white and amber light on causing a more orange look.
Don't know the problem, but it always defaults back to amber on the next start-up. I do have to say for the price I still love them and have worked quite nicely for at least 6 months now.
| Trigun001 | 03-08-2007 04:34 PM |
[QUOTE=Trigun001;17280178]Hey prosport I finally got my gauge pod today threw my three gauges in and was pretty upset to find that two of them, my electronic boost, and my electronic oil pressure gauges in white/green were both working but were lighting up both green and white at the same time. I guess this has something to do with the relay in them. All I do is connect the power and ground and they come on a greenish white, opposed to my EGT which comes on red until I tap the color wires. Is there anything I can do or do I just need to send them back to you?[/QUOTE]
I talked to some prosport guys about this problem and when they mentioned that they had never seen it before and the fact that I had two gauges doing it made me think I was doing something wrong. Sure enough I put a voltmeter than an Ameter to my 12 V source and found it reading at a very low 8.44 volts. Ran down to my car and tested them there and they worked fine. Looks like those relays need a good initial volatage to throw them into the right direction.
Pasths maybe you should check that youve wired them in parallel and check your battery maybe? Gauges work great and I cant wait to put em in this weekend.
I talked to some prosport guys about this problem and when they mentioned that they had never seen it before and the fact that I had two gauges doing it made me think I was doing something wrong. Sure enough I put a voltmeter than an Ameter to my 12 V source and found it reading at a very low 8.44 volts. Ran down to my car and tested them there and they worked fine. Looks like those relays need a good initial volatage to throw them into the right direction.
Pasths maybe you should check that youve wired them in parallel and check your battery maybe? Gauges work great and I cant wait to put em in this weekend.
| JiveMasterT | 03-08-2007 06:38 PM |
My gauge's back light flat out would not go on this morning. Maybe because of the cold or something, but it was not on at all. This afternoon it was working fine though... go figure.
| STi Juice | 03-08-2007 09:19 PM |
Any idea when some 60 mm Green WRX Gauges will come out?
| platinum05 | 03-08-2007 09:25 PM |
[QUOTE=STi Juice;17293371]Any idea when some 60 mm Green WRX Gauges will come out?[/QUOTE]
+1
i don't wanna settle for some 52mm maddads even though everything else they make is great.
+1
i don't wanna settle for some 52mm maddads even though everything else they make is great.
| STi Juice | 03-09-2007 12:58 AM |
Yeah, I have been waiting to get prosport gauges for awhile now but I want them to be 60 mm. And I love the WRX Green ones, so now all I am doing is waiting for the 60mm Green WRX Gauges
| G3Red04WRX | 03-13-2007 08:10 PM |
<--- After less than 2 months of actual use, i now have a defective EGT gauge. Already contacted Prosport directly to make good on their warranty claim. Just wanted to add myself to the "list" of people with a bad EGT gauge. Not sure what the problem is, sensor is in place, theres no nicks or kinks in the sensor wiring, the rest of the wiring is hardwired with the other 2 gauges that are working correctly, but the gauge just refuses to operate properly for the past few days. Up until this, i had very high hopes for these gauges, but knew it would be a crap shoot on the EGT. I guess its up to how well their customer service will take care of me now. On another note, i noticed that the white wire from my EGT gauge harness was loose and when i twisted the harness at just the right angle, the wire came out completely like it was not crimped tight enough. This most likely has nothing to do with the gauge problems, but now it bugs me i cant just leave it lit up in white with the sensor disconnected until i get my replacement. Oh well.
Prosport if your watching, take care of this customer! I have spread nothing but good word of your products to the people I know. Thanks.
Prosport if your watching, take care of this customer! I have spread nothing but good word of your products to the people I know. Thanks.
| G3Red04WRX | 03-15-2007 06:56 PM |
Just wanted to update, yesterday I got a call back from a representative at prosportgauges.com concerning my bad EGT gauge. They called me early in the day, were very friendly and courteous, and got a replacement EGT probe sent out to me right away. VERY easy company to deal with regarding warranty issues. Hopefully it is just the sender which they are pretty sure is the problem from the description of my problem i explained to them, but if it is the gauge itself, they said it was going to be no problem to get a new one shipped out to me as soon as possible if the sensor itself doesnt fix the problem.
I know these arent the most expensive gauges out there, but i have to give Prosport an A for effort in taking care of their customers when their product fails to work properly. Its nice to know there are companies out there that stand behind their product and are happy to make things right without any arguing back and forth about it. Thanks Prosport!
I know these arent the most expensive gauges out there, but i have to give Prosport an A for effort in taking care of their customers when their product fails to work properly. Its nice to know there are companies out there that stand behind their product and are happy to make things right without any arguing back and forth about it. Thanks Prosport!
| cbarth3 | 03-15-2007 06:59 PM |
any more info on this? Just installed the amber/white premium elc boost gague and it seems to be reading lower than it should. using datalogging software (enginuity and ecuexplorer) it shows I am getting upto 13-14lbs and the gauge is showing 10. also while in vacum datalogging software shows -10 and gauge shows -20+ also want to figure out if there is a way to disable the warning sound during opening ceremony as that is a little annoying.
| evohuntinwrx | 03-15-2007 10:16 PM |
what you guys think of this?
[URL]http://cgi.ebay.com/ebaymotors/02-03-04-05-SUBARU-WRX-FULL-TRIPLE-GAUGE-A-PILLAR-POD_W0QQcmdZViewItemQQcategoryZ46100QQitemZ250092887936QQrdZ1QQsspagenameZWDVW[/URL]
[URL]http://cgi.ebay.com/ebaymotors/02-03-04-05-SUBARU-WRX-FULL-TRIPLE-GAUGE-A-PILLAR-POD_W0QQcmdZViewItemQQcategoryZ46100QQitemZ250092887936QQrdZ1QQsspagenameZWDVW[/URL]
| bmms8 | 03-15-2007 11:03 PM |
[QUOTE=evohuntinwrx;17372064]what you guys think of this?
[URL]http://cgi.ebay.com/ebaymotors/02-03-04-05-SUBARU-WRX-FULL-TRIPLE-GAUGE-A-PILLAR-POD_W0QQcmdZViewItemQQcategoryZ46100QQitemZ250092887936QQrdZ1QQsspagenameZWDVW[/URL][/QUOTE]
i believe you are going to have to cut it out to the shape of your A pillar. i dont think it will be a direct fit.
[URL]http://cgi.ebay.com/ebaymotors/02-03-04-05-SUBARU-WRX-FULL-TRIPLE-GAUGE-A-PILLAR-POD_W0QQcmdZViewItemQQcategoryZ46100QQitemZ250092887936QQrdZ1QQsspagenameZWDVW[/URL][/QUOTE]
i believe you are going to have to cut it out to the shape of your A pillar. i dont think it will be a direct fit.
| Prosport Gauges | 03-16-2007 08:30 AM |
Just wanted to jump here and let you know we are always here for you guys. We are constantly praised for our customer service and we always stand behind what we sell. With as many gauges as we are selling the reject rate is one of the lowest in the industry. Each gauge is tested before they ship but as all know the USPS & UPS are not the most gentle people and thus damage in shipping can occur. If anyone EVER has a problem just contact us and we will ALWAYS make it right!
On a side note..we just got in 52mm Premium(peak) Series gauges in Green/white and the 60mm Premium in Amber/White are in production as we speak and should be available for purchase in about 35 days.
On a side note..we just got in 52mm Premium(peak) Series gauges in Green/white and the 60mm Premium in Amber/White are in production as we speak and should be available for purchase in about 35 days.
| Mechie3 | 03-16-2007 10:45 AM |
What about 60mm premiums in blue....or even better, switchable blue and white!
I bought a gauge pod ~5 months ago and have been waiting for the blue 60's.
I bought a gauge pod ~5 months ago and have been waiting for the blue 60's.
Không có nhận xét nào:
Đăng nhận xét