| biknman | 03-23-2009 06:50 PM |
[quote=Ottawagon;26057679]Selling some race specific kind of stuff:
Sparco EvoL Race seat with base mount, slider, and aluminum side mounts
Schroth harnesses (driver and passenger) - these mount to the stock belt location so can be run without cage or harness bar.
Whiteline ALK.
Search under my posts for these.
I also have (just haven't posted it yet) Homemade Aero: front splitter and rear wing for a wrx wagon. Will post this and put pics up soon - pm in the meantime if interested. It is a little ghetto, but totally effective, and good for literally seconds per lap on the track.[/quote]
I'd be interested in see pics.
Thanks
Dave
Sparco EvoL Race seat with base mount, slider, and aluminum side mounts
Schroth harnesses (driver and passenger) - these mount to the stock belt location so can be run without cage or harness bar.
Whiteline ALK.
Search under my posts for these.
I also have (just haven't posted it yet) Homemade Aero: front splitter and rear wing for a wrx wagon. Will post this and put pics up soon - pm in the meantime if interested. It is a little ghetto, but totally effective, and good for literally seconds per lap on the track.[/quote]
I'd be interested in see pics.
Thanks
Dave
| Ottawagon | 03-23-2009 07:15 PM |
[QUOTE=biknman;26060341]I'd be interested in see pics.
Thanks
Dave[/QUOTE]
Hey Dave,
See all my posts and pics here: [url]http://forums.nasioc.com/forums/search.php?searchid=5320480[/url]
ALK: [url]http://forums.nasioc.com/forums/showthread.php?t=1723557[/url]
Harnesses: [url]http://forums.nasioc.com/forums/showthread.php?t=1723563[/url]
EvoL seat: [url]http://forums.nasioc.com/forums/showthread.php?t=1723562[/url]
16x8 Rays wheels with Hoosier R6: [url]http://forums.nasioc.com/forums/showthread.php?t=1723559[/url]
Sti pedals (with dead pedal): [url]http://forums.nasioc.com/forums/showthread.php?t=1723560[/url]
Thanks,
S
Thanks
Dave[/QUOTE]
Hey Dave,
See all my posts and pics here: [url]http://forums.nasioc.com/forums/search.php?searchid=5320480[/url]
ALK: [url]http://forums.nasioc.com/forums/showthread.php?t=1723557[/url]
Harnesses: [url]http://forums.nasioc.com/forums/showthread.php?t=1723563[/url]
EvoL seat: [url]http://forums.nasioc.com/forums/showthread.php?t=1723562[/url]
16x8 Rays wheels with Hoosier R6: [url]http://forums.nasioc.com/forums/showthread.php?t=1723559[/url]
Sti pedals (with dead pedal): [url]http://forums.nasioc.com/forums/showthread.php?t=1723560[/url]
Thanks,
S
| rjrutzky | 03-24-2009 01:43 PM |
Hankook Z214 C50 225/45/17
[url]http://forums.nasioc.com/forums/showthread.php?t=1726782[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1726782[/url]
| aceking66 | 03-25-2009 04:55 PM |
I have a brand new fivestar wide angle rear view mirror curved that been sittting in the garge i paid $49.99 + shipping for it will let it go for $45 shipped it comes with roll bar mount ready to go.
Please PM if interested. thank you for looking
[IMG]http://i60.photobucket.com/albums/h24/aceking66/viewmirror.jpg?t=1237908888[/IMG]
Please PM if interested. thank you for looking
[IMG]http://i60.photobucket.com/albums/h24/aceking66/viewmirror.jpg?t=1237908888[/IMG]
| digitalseance | 03-25-2009 10:38 PM |
Testing waters for "Black Betty" -
[url]http://forums.nasioc.com/forums/showthread.php?t=1728581[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1728581[/url]
| Wild999 | 03-28-2009 06:15 PM |
The ultimate brake package for a Subaru.
[url]http://forums.nasioc.com/forums/showthread.php?t=1679634[/url]
PM me for more info.
[url]http://forums.nasioc.com/forums/showthread.php?t=1679634[/url]
PM me for more info.
| Whiteghost 2.5 | 03-30-2009 01:40 PM |
Bumping this up
Getting transferred out of state so up for sale is my GD Chassis that was being prepped for Speed World Challenge competition.
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3105.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3094.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3098.jpg[/IMG]
the Chassis is now a roller. It has been caged to Speed World Challenge Specs with 1.75x.095 DOM
by BSI in Ormond Beach FL. It is a 02-03 chassis.
the chassis will come with
4 doors
trunk
Dash pad
05 sti front crossmember/w 05 sti steering rack
Front Sti control arms
JDM hubs 5x100 with arp extended studs
Ball joint extenders up front
Rear diff t-brace with aluminum mounts
06 front bumper
06-07 front headlights
turn down exhaust
Switch panel w wiring
Fuse panel with wiring and tilton brake bias adjuster
Hotchkis competition 25mm sways front and back.
(sway bars only no mounting hardware or bushings)
Plus there are various otehr parts in the garage that will be included.
Heres a link to alot of pics
[url]http://s276.photobucket.com/albums/kk33/SubaruSpecialist/[/url]
$4500 + I will split the shipping cost for the chassis with the buyer + add 3% if using paypal
the additional parts will need to be shipped via UPS
Thanks
Josh
Getting transferred out of state so up for sale is my GD Chassis that was being prepped for Speed World Challenge competition.
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3105.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3094.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3098.jpg[/IMG]
the Chassis is now a roller. It has been caged to Speed World Challenge Specs with 1.75x.095 DOM
by BSI in Ormond Beach FL. It is a 02-03 chassis.
the chassis will come with
4 doors
trunk
Dash pad
05 sti front crossmember/w 05 sti steering rack
Front Sti control arms
JDM hubs 5x100 with arp extended studs
Ball joint extenders up front
Rear diff t-brace with aluminum mounts
06 front bumper
06-07 front headlights
turn down exhaust
Switch panel w wiring
Fuse panel with wiring and tilton brake bias adjuster
Hotchkis competition 25mm sways front and back.
(sway bars only no mounting hardware or bushings)
Plus there are various otehr parts in the garage that will be included.
Heres a link to alot of pics
[url]http://s276.photobucket.com/albums/kk33/SubaruSpecialist/[/url]
$4500 + I will split the shipping cost for the chassis with the buyer + add 3% if using paypal
the additional parts will need to be shipped via UPS
Thanks
Josh
| red911sc83 | 03-30-2009 09:12 PM |
Moton Club Sport coilovers, DMS camber plates
�
�
Looking to see if anyone is interested in a set of Moton CLub Sport coilovers with DMS camber plates.
PM me if you have any questions.
I posted an ad on the "for sale" classifieds but with little luck.
Thanks,
Kenny
PM me if you have any questions.
I posted an ad on the "for sale" classifieds but with little luck.
Thanks,
Kenny
| red911sc83 | 03-31-2009 09:13 AM |
photos of the suspension
�
�
Here is a link to a photo page of the coilovers/camber plates.
[url]http://www.flickr.com/photos/conwayautoworkscom/[/url]
They are currently on an 05 STI.
They are located in Hanover MA
PM me with any questions.
Thanks
[url]http://www.flickr.com/photos/conwayautoworkscom/[/url]
They are currently on an 05 STI.
They are located in Hanover MA
PM me with any questions.
Thanks
| Subiemax | 04-01-2009 11:27 AM |
Sold!
| wagonman | 04-01-2009 11:14 PM |
(3) bottles of Motul RBF 600 fluid --- Never got around to switching over, no need for it now.
[COLOR="Red"][B]SOLD[/B][/COLOR]
[COLOR="Red"][B]SOLD[/B][/COLOR]
| Subiemax | 04-12-2009 07:20 PM |
Here is the " catback exhaust " I used on my BSP STI.
Will only mount to aftermarket downpipes. Consists of a flat flange to a resonator then to a turndown. Loud and obnoxious, but great for racing. Could be a good STU or BSP cat back.
$75 shipped OBO.
[IMG]http://img.photobucket.com/albums/v169/subiemax/DSC01980.jpg[/IMG]
Will only mount to aftermarket downpipes. Consists of a flat flange to a resonator then to a turndown. Loud and obnoxious, but great for racing. Could be a good STU or BSP cat back.
$75 shipped OBO.
[IMG]http://img.photobucket.com/albums/v169/subiemax/DSC01980.jpg[/IMG]
| digitalseance | 04-14-2009 09:18 AM |
a set (4) of 18x9.5 Rota Grids et35 (IIRC, will verify tonight) with 285/35/18 v710s with approx 65%-75% life left.
$1,000. Prefer not to ship, but buyer pays shipping if they must be shipped. Will deliver or meet half way within a reasonable distance (ie, Charleston, Orlando, Macon, Pensecola, Gainesville).
[IMG]http://i113.photobucket.com/albums/n230/digitalseance/dsracing/2009/IMG_0293.jpg[/IMG]
[IMG]http://i113.photobucket.com/albums/n230/digitalseance/dsracing/2009/IMG_0287.jpg[/IMG]
$1,000. Prefer not to ship, but buyer pays shipping if they must be shipped. Will deliver or meet half way within a reasonable distance (ie, Charleston, Orlando, Macon, Pensecola, Gainesville).
[IMG]http://i113.photobucket.com/albums/n230/digitalseance/dsracing/2009/IMG_0293.jpg[/IMG]
[IMG]http://i113.photobucket.com/albums/n230/digitalseance/dsracing/2009/IMG_0287.jpg[/IMG]
| b16r1ch | 04-14-2009 10:09 AM |
FS (TX): 07 STi, TT-S Ready
�
�
Sadly, I'm moving to NorCal and can no longer afford this expensive hobby. Given I have three months to move, I'm hoping to move this [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]car[/URL] in half the time.
This car has been campaigned in the NASA Time Trials and has built to suit. Here is a link to car pics on one of my sponsors sites: [URL="http://www.awdtuning.com/sponsored.cfm"][COLOR=#22229c]http://www.awdtuning.com/sponsored.cfm[/COLOR][/URL]# (click on b16r1ch)
Below is the full list of mods to the car are:
APS Turbo-Back 3� [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Exhaust[/URL] (Catless)
Grimmspeed Ported/Polished/Ceramic-Coated Exhaust Manifold/Cross-Over Pipe
Grimmspeed High-Flow Up-Pipe
Grimmspeed Ported/Polished/Ceramic-Coated Throttle Body
Grimmspeed Ported/Polished Intake Manifold
Grimmspeed Ported/Polished TGV Delete
Grimmspeed 8mm Phenolic Spacers
Grimmspeed EWG Up-pipe
[B][I]Deadbolt SZ55 [/I][/B][URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"][B][I]Turbo[/I][/B][/URL]
TiAL 38mm 8lb Spring
KS Tech 73mm Intake
APS Turbo Inlet
APS TMIC
APS Dual BPV
[B][I]AWDTuning 93 Tune [/I][/B]
[B][I]RynoMoto 'Race' Motor [/I][/B]
Walbro 255lph [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Fuel[/URL] Pump
1085cc DW Injectors
Group CA Lightened Crankshaft Pulley
Goodridge Stainless Steel [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Brake[/URL] Lines
Hawk HT10 F/R Pads
AST 4100 Series SA Coilovers (Spring Rates: 400F/350R)
Vorshlag [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Motorsports[/URL] Front/Rear Camber Plates
Whiteline 27mm Front & Rear Sway Bars
Whiteline Spherical Bearing Front & Rear Endlinks
Whiteline Heavy Duty Front & Rear Sway Bar Mounts
Whiteline Roll Center Kit
Whiteline Anti-Lift Kit
Whiteline Toe Lock Kit
Whiteline Camber Bolts Front & Rear
Whiteline Rear Lateral Links
Whiteline Strut Tower Bars Front & Rear
Whiteline Differential Support-Lock Bushings
Whiteline Steering-Rack Bushings
Whiteline Gearbox Mount Bushings
Recaro SRD Seats
Defi Racer Gauges/Gauge Pod
Kartboy Short Shifter/Shifter Busings
Kartboy Exhaust Hangers
GiroDisc Floating Slotted Front Rotors
StopTech Slotted Rear Rotors
5Zigen FN-01RC Track Rims
18x235/40 Dunlop Direzza 03G �R� Compound Tires
Fluids were just changed and have less than 500m on them:
Castrol SRF Brake Fluid
Amsoil 15w-50 Dominator 'Race' Oil
Amsoil Severe Gear 70w-90 Transmission Fluid
OEM Subaru LSD Fluid
Considering this list and the level of effort spent on this car, I would easily estimate this to be valued at or above $50k worth in parts and labor. That all said, I'm asking [B][I]$30k[/I][/B] and am open to reasonable offers.
Please PM if interested...thanks!!!
-Rich
This car has been campaigned in the NASA Time Trials and has built to suit. Here is a link to car pics on one of my sponsors sites: [URL="http://www.awdtuning.com/sponsored.cfm"][COLOR=#22229c]http://www.awdtuning.com/sponsored.cfm[/COLOR][/URL]# (click on b16r1ch)
Below is the full list of mods to the car are:
APS Turbo-Back 3� [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Exhaust[/URL] (Catless)
Grimmspeed Ported/Polished/Ceramic-Coated Exhaust Manifold/Cross-Over Pipe
Grimmspeed High-Flow Up-Pipe
Grimmspeed Ported/Polished/Ceramic-Coated Throttle Body
Grimmspeed Ported/Polished Intake Manifold
Grimmspeed Ported/Polished TGV Delete
Grimmspeed 8mm Phenolic Spacers
Grimmspeed EWG Up-pipe
[B][I]Deadbolt SZ55 [/I][/B][URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"][B][I]Turbo[/I][/B][/URL]
TiAL 38mm 8lb Spring
KS Tech 73mm Intake
APS Turbo Inlet
APS TMIC
APS Dual BPV
[B][I]AWDTuning 93 Tune [/I][/B]
[B][I]RynoMoto 'Race' Motor [/I][/B]
Walbro 255lph [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Fuel[/URL] Pump
1085cc DW Injectors
Group CA Lightened Crankshaft Pulley
Goodridge Stainless Steel [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Brake[/URL] Lines
Hawk HT10 F/R Pads
AST 4100 Series SA Coilovers (Spring Rates: 400F/350R)
Vorshlag [URL="http://forums.nasioc.com/forums/showthread.php?p=26340997&posted=1#"]Motorsports[/URL] Front/Rear Camber Plates
Whiteline 27mm Front & Rear Sway Bars
Whiteline Spherical Bearing Front & Rear Endlinks
Whiteline Heavy Duty Front & Rear Sway Bar Mounts
Whiteline Roll Center Kit
Whiteline Anti-Lift Kit
Whiteline Toe Lock Kit
Whiteline Camber Bolts Front & Rear
Whiteline Rear Lateral Links
Whiteline Strut Tower Bars Front & Rear
Whiteline Differential Support-Lock Bushings
Whiteline Steering-Rack Bushings
Whiteline Gearbox Mount Bushings
Recaro SRD Seats
Defi Racer Gauges/Gauge Pod
Kartboy Short Shifter/Shifter Busings
Kartboy Exhaust Hangers
GiroDisc Floating Slotted Front Rotors
StopTech Slotted Rear Rotors
5Zigen FN-01RC Track Rims
18x235/40 Dunlop Direzza 03G �R� Compound Tires
Fluids were just changed and have less than 500m on them:
Castrol SRF Brake Fluid
Amsoil 15w-50 Dominator 'Race' Oil
Amsoil Severe Gear 70w-90 Transmission Fluid
OEM Subaru LSD Fluid
Considering this list and the level of effort spent on this car, I would easily estimate this to be valued at or above $50k worth in parts and labor. That all said, I'm asking [B][I]$30k[/I][/B] and am open to reasonable offers.
Please PM if interested...thanks!!!
-Rich
| PossumK | 04-14-2009 10:22 PM |
I have Whiteline adjustable rear lateral links (KTA109) and a Whiteline 22mm rear adjustable sway bar for sale in this thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1741916[/url]
Both were used on my 04 WRX for autocross in STX.
-Greg
[url]http://forums.nasioc.com/forums/showthread.php?t=1741916[/url]
Both were used on my 04 WRX for autocross in STX.
-Greg
| Splash | 04-14-2009 10:36 PM |
FS (OH): Pair of Hypercoil 60mm, 7", 600lb/in coilover springs
�
�
Sold!
| Leonardo | 04-14-2009 11:58 PM |
Phil, check the Jax thread. ;)
| FTD | 04-18-2009 03:31 PM |
Hi all,
I have a set of Hoosier Wets with only one season of use on them. They were bought new at the beginning of 2008.
Size: 225/45-17's
These are the latest compound H-wet. On average there are 5/32+ of measured tread depth remaining on all 4 tires (new is 9/32's). They were well cared for; shrink wrapped and bagged over the winter in my basement.
Asking: $450+shipping
PM me if you are interested, I will be posting on SCCA forums as well. I can bring them to an upcoming Milwaukee event or make other arrangements.
Thanks,
Chris Fenter
I have a set of Hoosier Wets with only one season of use on them. They were bought new at the beginning of 2008.
Size: 225/45-17's
These are the latest compound H-wet. On average there are 5/32+ of measured tread depth remaining on all 4 tires (new is 9/32's). They were well cared for; shrink wrapped and bagged over the winter in my basement.
Asking: $450+shipping
PM me if you are interested, I will be posting on SCCA forums as well. I can bring them to an upcoming Milwaukee event or make other arrangements.
Thanks,
Chris Fenter
| triple_s1x | 04-19-2009 12:29 PM |
Selling a comlete set of Rota Boosts 18x10 +35 5X114.3 w/ 285/30/18 R6's (used 50% left)
Asking $1,000 plus shipping..
[img]http://i39.photobucket.com/albums/e168/mhryckie/IMG00091.jpg[/img]
[img]http://i39.photobucket.com/albums/e168/mhryckie/S7300003.jpg[/img]
RacePak Iq3 $1295
[IMG]http://i39.photobucket.com/albums/e168/mhryckie/S7300073.jpg[/IMG]
-Couple 9x12 CF sheets
[IMG]http://i39.photobucket.com/albums/e168/mhryckie/S7300095.jpg[/IMG]
-Recaro, Momo, Schroth racing, etc...
[url]http://www.nasaforums.com/viewtopic.php?f=35&t=27891&p=195997#p195997[/url]
Asking $1,000 plus shipping..
[img]http://i39.photobucket.com/albums/e168/mhryckie/IMG00091.jpg[/img]
[img]http://i39.photobucket.com/albums/e168/mhryckie/S7300003.jpg[/img]
RacePak Iq3 $1295
[IMG]http://i39.photobucket.com/albums/e168/mhryckie/S7300073.jpg[/IMG]
-Couple 9x12 CF sheets
[IMG]http://i39.photobucket.com/albums/e168/mhryckie/S7300095.jpg[/IMG]
-Recaro, Momo, Schroth racing, etc...
[url]http://www.nasaforums.com/viewtopic.php?f=35&t=27891&p=195997#p195997[/url]
| scobaru | 04-19-2009 05:18 PM |
how much for the CF sheets
| triple_s1x | 04-19-2009 08:02 PM |
[quote=scobaru;26409957]how much for the CF sheets[/quote]
$25 a piece.
$25 a piece.
| Homemade WRX | 04-20-2009 07:41 PM |
what are the dimensions on the sheets?
also any close ups of the ply?
thanks,
Micah
also any close ups of the ply?
thanks,
Micah
| scobaru | 04-21-2009 03:07 AM |
is the Schroth Harness 3inch wide? and how many of the wilwood brake bias adjusters would you need for a car?
i might be interested in a few things...
i might be interested in a few things...
| digitalseance | 04-24-2009 08:17 AM |
A set of the Cusco Zero-2Rs with 2 sets of Cusco springs. One set of the defaults (7kg/mm front & 5kg/mm rear I think, could be wrong here) that were never used and still "BNIB" type of condition and one set of 11kg/mm front and 9kg/mm rear. Fronts have built in camber plates.
They've been on the car for approximately 8k miles or so but for just over 2 1/2 years.
I believe they fit 02-07 WRX and 04 STi according to Nukabe:
[url]http://www.napsusa.com/~napsusac/catalog/index.php?main_page=product_info&cPath=17_27_20_43_41&products_id=48[/url]
With these coilovers, I was able to peak over 1.6 lateral g-forces in my bugeye.
Retail for these bad boys is $2,690 plus $300-ish for the second set of springs making it a $2,890 purchase plus sales tax if ordered new.
[I]Asking $1,700 & $200 for the second set of default springs: $1,800 if you want both sets[/I] (in case the 11/9 is too rough for you). Price is [B]OBO[/B].
stock photo:
[IMG]http://www.napsusa.com/~napsusac/catalog/images/cusco/ZERO2R_01.jpg[/IMG]
They've been on the car for approximately 8k miles or so but for just over 2 1/2 years.
I believe they fit 02-07 WRX and 04 STi according to Nukabe:
[url]http://www.napsusa.com/~napsusac/catalog/index.php?main_page=product_info&cPath=17_27_20_43_41&products_id=48[/url]
With these coilovers, I was able to peak over 1.6 lateral g-forces in my bugeye.
Retail for these bad boys is $2,690 plus $300-ish for the second set of springs making it a $2,890 purchase plus sales tax if ordered new.
[I]Asking $1,700 & $200 for the second set of default springs: $1,800 if you want both sets[/I] (in case the 11/9 is too rough for you). Price is [B]OBO[/B].
stock photo:
[IMG]http://www.napsusa.com/~napsusac/catalog/images/cusco/ZERO2R_01.jpg[/IMG]
Không có nhận xét nào:
Đăng nhận xét