| WagonMonster | 03-31-2007 11:23 PM |
SSR's added :)
| Homemade WRX | 04-06-2007 09:50 AM |
looks like I need to find some 17's now...
| scotthle | 04-16-2007 08:28 PM |
............coooooool..
| thechickencow | 04-22-2007 11:11 PM |
just reduced the price on my suspension
| Legacy | 04-24-2007 12:51 PM |
[QUOTE=MattNJ2.8;17293988]4 Toyo RA-1 70-80% Tread left 255/40/17 Excellent Shape $340
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/TiresforSale004.jpg[/IMG]
[/QUOTE]
Are you selling the FN01R's with the Toyo's ? Wheel size ?
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/TiresforSale004.jpg[/IMG]
[/QUOTE]
Are you selling the FN01R's with the Toyo's ? Wheel size ?
| AndrewSS | 04-27-2007 04:53 PM |
FS: (OH) - 05 Stock BBS Gold Wheels & Yoko Advan Neova AD07 Tires *PIX*
�
�
Hey guys, I am making the switch to 9" wide wheels... I am lookin to get rid of my current autox/summer setup.
-New Yokohama advan AD07's in 245/40/17 cost: $209.00 each, plus $40-$50 for shipping making the total new to generally: [B]$875.00[/B] shipped.
-Marginal condition/dist pitted WITH some lip damage (could paint over it EASY): 05 STi BBS gold wheels usually (from what I have seen) go for about [B]$550.00[/B] or so a set.
My goldies have a decent amount of brake dust pitting (unfortunately) but the price will be reduced appropriately. You will see their condition in the pictures to judge this.
My Neova tires have about 3,000 miles of street driving and most of a season of racing on them. You can see their condition in the pictures, they have decent depth and I would expect a good bit of life left in them.
[B]Bottom line: [/B] I would PREFER to sell these as a set, so I don't have to mess with dismounting, etc.
Pricing:
As a set: [B]$1,100.00 [I]shipped[/I][/B] +1.5% paypal fee (fee is 3%, we would split the cost).
Seperate: Wheels: [B]$575.00 [I]shipped[/I][/B]
Seperate: Tires: [B]$575.00 [I]shipped[/I][/B]
****************************
I am willing to paint the goldies any spray paint color you would like, I have done my other set of stockers and it turned out really good, and I am quite happy with the condition... for painting, add in $215.00 for a custom color
****************************
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1821.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1827.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1825.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1824.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1823.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1831.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1829.jpg[/IMG]
-New Yokohama advan AD07's in 245/40/17 cost: $209.00 each, plus $40-$50 for shipping making the total new to generally: [B]$875.00[/B] shipped.
-Marginal condition/dist pitted WITH some lip damage (could paint over it EASY): 05 STi BBS gold wheels usually (from what I have seen) go for about [B]$550.00[/B] or so a set.
My goldies have a decent amount of brake dust pitting (unfortunately) but the price will be reduced appropriately. You will see their condition in the pictures to judge this.
My Neova tires have about 3,000 miles of street driving and most of a season of racing on them. You can see their condition in the pictures, they have decent depth and I would expect a good bit of life left in them.
[B]Bottom line: [/B] I would PREFER to sell these as a set, so I don't have to mess with dismounting, etc.
Pricing:
As a set: [B]$1,100.00 [I]shipped[/I][/B] +1.5% paypal fee (fee is 3%, we would split the cost).
Seperate: Wheels: [B]$575.00 [I]shipped[/I][/B]
Seperate: Tires: [B]$575.00 [I]shipped[/I][/B]
****************************
I am willing to paint the goldies any spray paint color you would like, I have done my other set of stockers and it turned out really good, and I am quite happy with the condition... for painting, add in $215.00 for a custom color
****************************
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1821.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1827.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1825.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1824.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1823.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1831.jpg[/IMG]
[IMG]http://i173.photobucket.com/albums/w56/bulletshell13/DSCN1829.jpg[/IMG]
| scobaru | 04-30-2007 12:52 AM |
Anyone have slide on wheel spacers?
| JamesWilson | 05-07-2007 09:24 PM |
FS-
Hankook Ventus R202 Rallye Tyres 160/640R15 size, G70 compound. Used only one rallycross event, ~9 laps on a dry lakebed. Top Time Of Day! Almost zero wear, completely sharp corners. Mounted on a set of 15x6" Subaru alloy wheels, one is slightly out of round on the balancer but otherwise unnoticable.
I will take photos in a few minutes. Need gas $$ to get to the SCCA National Tour in Houston.
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010066.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010060.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010061.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r2022.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r2021.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r202.jpg[/IMG]
Price is $500.00 FIRM for all, plus the paypal fee if you choose to pay that way. Otherwise, they go on eBay. I prefer local pickup in SoCal, shipping is a bear but can be done. Possibly deliver to a SoCal rallycross event.
Thanks!
[EMAIL="[email�protected]"][email�protected][/EMAIL]
Hankook Ventus R202 Rallye Tyres 160/640R15 size, G70 compound. Used only one rallycross event, ~9 laps on a dry lakebed. Top Time Of Day! Almost zero wear, completely sharp corners. Mounted on a set of 15x6" Subaru alloy wheels, one is slightly out of round on the balancer but otherwise unnoticable.
I will take photos in a few minutes. Need gas $$ to get to the SCCA National Tour in Houston.
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010066.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010060.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/P1010061.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r2022.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r2021.jpg[/IMG]
[IMG]http://i170.photobucket.com/albums/u265/jamesnwilson1982/r202.jpg[/IMG]
Price is $500.00 FIRM for all, plus the paypal fee if you choose to pay that way. Otherwise, they go on eBay. I prefer local pickup in SoCal, shipping is a bear but can be done. Possibly deliver to a SoCal rallycross event.
Thanks!
[EMAIL="[email�protected]"][email�protected][/EMAIL]
| sti752 | 05-12-2007 10:18 PM |
I have for sale a set of Advanced Design Dampers with Ground control housings. They are for a 2005 STi and are double adjustable for compression and rebound and are valved for 500-800 lb springs. They were originally purchased for Stompy out of Atlanta and Joel and Tommy won several National Tours on these. I purchased them almost a year ago from Joel and this setup again won a National Tour on my car at this year's Dixie National Tour. Joel finished first in my car and I finished fourth in BSP at this event.
The rear dampers will need a rebuild as they have leaked some fluid out so the asking price is considering this.
Asking for $1200 shipped for this setup (which includes 4 dampers and 2 sets of Ground Control housings). If interested please email me @ [email][email�protected][/email] for pics and further questions.
The rear dampers will need a rebuild as they have leaked some fluid out so the asking price is considering this.
Asking for $1200 shipped for this setup (which includes 4 dampers and 2 sets of Ground Control housings). If interested please email me @ [email][email�protected][/email] for pics and further questions.
| nhsilversti | 05-14-2007 11:51 PM |
up for sale is my freshly rebuilt set of tein flex coilovers. they have 10/8k springs. they were NOT bad before the rebuild! i did it for the sake of it over the winter. i have 650+ tied up into having them rebuilt. they were on the car for 3 weeks after the rebuild.
i am looking to get 1100 OBO plus shipping and paypal fees.
i NEED to move these NOW, need to get 06 flex for the new car.
ted
ps. need to mention on one of the front struts one of the brackests for the brake line is missing, the brake line can tied to the abs or the strut without a problem.
[url]http://forums.nasioc.com/forums/showthread.php?t=1264382[/url]
i am looking to get 1100 OBO plus shipping and paypal fees.
i NEED to move these NOW, need to get 06 flex for the new car.
ted
ps. need to mention on one of the front struts one of the brackests for the brake line is missing, the brake line can tied to the abs or the strut without a problem.
[url]http://forums.nasioc.com/forums/showthread.php?t=1264382[/url]
| Warp3 | 05-15-2007 09:57 AM |
Autopower bolt-in "race" rollbar (with crossbar and harness bar; both welded in) with SFI 45.1 padding from my 99RS - $370
[b]Local pickup only (Flat Rock, NC 28731)![/b]
See my FS thread for link to pics:
[url]http://forums.nasioc.com/forums/showthread.php?t=1247924[/url]
[b]Local pickup only (Flat Rock, NC 28731)![/b]
See my FS thread for link to pics:
[url]http://forums.nasioc.com/forums/showthread.php?t=1247924[/url]
| STiShawn | 05-23-2007 01:04 PM |
[IMG]http://img.photobucket.com/albums/v337/drgnrcr101/Audi/Marlas_First_Rally/shawncar0s1.jpg[/IMG]
SOLD SOLD SOLD
SOLD SOLD SOLD
| STiShawn | 06-12-2007 10:46 AM |
sold.
| DILLIGAF Racing | 06-18-2007 10:21 PM |
Tire Trailer for sale in Pittsburgh. $350
[IMG]http://img.photobucket.com/albums/v257/DILLIGAF15243/S2010001.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v257/DILLIGAF15243/S2010002.jpg[/IMG]
Its designed to have 2 sets of tires, or you can have it with just 1 set, and slide the bar over the axle for better weight distribution. Was hauled behind a 944.
[COLOR="Red"][B]SOLD[/B][/COLOR]
[IMG]http://img.photobucket.com/albums/v257/DILLIGAF15243/S2010001.jpg[/IMG]
[IMG]http://img.photobucket.com/albums/v257/DILLIGAF15243/S2010002.jpg[/IMG]
Its designed to have 2 sets of tires, or you can have it with just 1 set, and slide the bar over the axle for better weight distribution. Was hauled behind a 944.
[COLOR="Red"][B]SOLD[/B][/COLOR]
| ein86 | 06-21-2007 02:06 PM |
.............................................
| Whiteghost 2.5 | 06-26-2007 08:01 PM |
FS: 2 Speed World Challenge Subaru Chassis's
�
�
[url]http://forums.nasioc.com/forums/showthread.php?t=1293343[/url]
Thanks
Josh
Thanks
Josh
| MPME | 06-27-2007 12:11 AM |
Motec ADL2 For Sale, Lightly Used
�
�
Lightly used Motec ADL2 dash, 16mb, non-backlit. Used in Subaru SPEED GT car twice. New Cost is almost $7K w/16mb option.
Make reasonable offer. Payments are an option. I'm more interested in parting with the dash than holding out for the last penny.
[IMG]http://www.motec.com/images/products/dash/ADL2%20Drags%20Blk_mid.jpg[/IMG]
Make reasonable offer. Payments are an option. I'm more interested in parting with the dash than holding out for the last penny.
[IMG]http://www.motec.com/images/products/dash/ADL2%20Drags%20Blk_mid.jpg[/IMG]
| Subie Gal | 07-06-2007 09:41 AM |
Piloti driving shoes - mens size 11
�
�
[url]http://forums.nasioc.com/forums/showthread.php?p=18626669#post18626669[/url]
| elirentz | 07-07-2007 10:16 AM |
[URL="http://forums.nasioc.com/forums/showthread.php?t=1297488"]http://forums.nasioc.com/forums/showthread.php?t=1297488[/URL]
need to sell give me some offers
need to sell give me some offers
| Whiteghost 2.5 | 07-08-2007 04:41 PM |
how much would shipping on the hoosiers be to 34653?
Thanks
Thanks
| Storm | 07-13-2007 07:37 AM |
Brand New 285-30-18 V710s
�
�
These are now sold....Thanks!
Jay Storm
Edit...Pictures......
[URL=http://rides.webshots.com/photo/2484443150094569859sqosoG][IMG]http://thumb19.webshots.net/t/63/463/4/43/15/2484443150094569859sqosoG_th.jpg[/IMG][/URL]
[URL=http://rides.webshots.com/photo/2723132350094569859DlBFdY][IMG]http://thumb19.webshots.net/t/30/466/1/32/35/2723132350094569859DlBFdY_th.jpg[/IMG][/URL]
[URL=http://rides.webshots.com/photo/2638409340094569859VSpNnR][IMG]http://thumb19.webshots.net/t/55/455/4/9/34/2638409340094569859VSpNnR_th.jpg[/IMG][/URL]
Jay Storm
Edit...Pictures......
[URL=http://rides.webshots.com/photo/2484443150094569859sqosoG][IMG]http://thumb19.webshots.net/t/63/463/4/43/15/2484443150094569859sqosoG_th.jpg[/IMG][/URL]
[URL=http://rides.webshots.com/photo/2723132350094569859DlBFdY][IMG]http://thumb19.webshots.net/t/30/466/1/32/35/2723132350094569859DlBFdY_th.jpg[/IMG][/URL]
[URL=http://rides.webshots.com/photo/2638409340094569859VSpNnR][IMG]http://thumb19.webshots.net/t/55/455/4/9/34/2638409340094569859VSpNnR_th.jpg[/IMG][/URL]
| RainMaker | 07-14-2007 12:24 AM |
Hi guys,
PDXTuning is replacing the shortblock with another new shortblock, and I've decided to try AutoX'ing a different vehicle. I've asked PDX to return the car to stock so I can sell it. (15k miles, 06 CGM STi, $26,500 firm for now)
I have the following parts for sale (as soon as they remove them... the car is currently under the knife)-
1. Perrin EL Header, coated. No leaks - $600
2. FP Evo3-16g turbo (likely has the WG flapper welded) - (good VF39 + $200) or $550
3. Perrin 25mm rear swaybar with Perrin Endlinks- $200
4. Perrin Rear adjustable Lateral Links- $300 plus stock STi rear lateral links [COLOR="Red"]Dibs to ghostrr[/COLOR]
5. 275/35/18 Hoosier A6 on silver 18x8.5 +45 Gram Light 54Fs (used for 2 AutoXs) 05+ STi only - $1700
6. JECS/Nismo 720cc Injectors (flowtested 1k miles ago right at 719-721cc)- $375
7. New-in-box Wiseco 100mm offset wristpin pistons/rings/etc- $475
8. Shroth Rallye4 Harness (silver, bolts into rear seatbelt fittings) - $100
9. AndrewSS Quick-Connect Camera Mount - $50
10. Innovate LC-1 WBo2/XD-1 Guage- $400
11. TurboXS KnockLite- $100 [COLOR="Red"]SOLD to TraSTi[/COLOR]
12. Apex'i AVC-R Boost Controller- $250
13. 06' STi Cobb Access Port- $425
14. Cobb Catted DP - $275
15. Spec C 12l water tank - $175 [COLOR="Red"]SOLD to TraSTi[/COLOR]
16. Ultimate racing lightweight underdrive pulley - $100
[B]All prices are PLUS shipping and PLUS 3% if you choose to pay with Paypal.[/B]
[email][email�protected][/email] is the best way to get ahold of me. Thanks!
PDXTuning is replacing the shortblock with another new shortblock, and I've decided to try AutoX'ing a different vehicle. I've asked PDX to return the car to stock so I can sell it. (15k miles, 06 CGM STi, $26,500 firm for now)
I have the following parts for sale (as soon as they remove them... the car is currently under the knife)-
1. Perrin EL Header, coated. No leaks - $600
2. FP Evo3-16g turbo (likely has the WG flapper welded) - (good VF39 + $200) or $550
3. Perrin 25mm rear swaybar with Perrin Endlinks- $200
4. Perrin Rear adjustable Lateral Links- $300 plus stock STi rear lateral links [COLOR="Red"]Dibs to ghostrr[/COLOR]
5. 275/35/18 Hoosier A6 on silver 18x8.5 +45 Gram Light 54Fs (used for 2 AutoXs) 05+ STi only - $1700
6. JECS/Nismo 720cc Injectors (flowtested 1k miles ago right at 719-721cc)- $375
7. New-in-box Wiseco 100mm offset wristpin pistons/rings/etc- $475
8. Shroth Rallye4 Harness (silver, bolts into rear seatbelt fittings) - $100
9. AndrewSS Quick-Connect Camera Mount - $50
10. Innovate LC-1 WBo2/XD-1 Guage- $400
11. TurboXS KnockLite- $100 [COLOR="Red"]SOLD to TraSTi[/COLOR]
12. Apex'i AVC-R Boost Controller- $250
13. 06' STi Cobb Access Port- $425
14. Cobb Catted DP - $275
15. Spec C 12l water tank - $175 [COLOR="Red"]SOLD to TraSTi[/COLOR]
16. Ultimate racing lightweight underdrive pulley - $100
[B]All prices are PLUS shipping and PLUS 3% if you choose to pay with Paypal.[/B]
[email][email�protected][/email] is the best way to get ahold of me. Thanks!
| nater | 07-17-2007 04:38 PM |
G2X GPS based data logger
It is BRAND NEW, never installed, never used. Everything is still sealed inside the bags except for the display which I took out to fondle.
[url]http://www.msdignition.com/g2x/[/url]
I paid 943.00 plus shipping.. I will do 900 shipped. Remember, this is brand new! My loss is your gain!
It is BRAND NEW, never installed, never used. Everything is still sealed inside the bags except for the display which I took out to fondle.
[url]http://www.msdignition.com/g2x/[/url]
I paid 943.00 plus shipping.. I will do 900 shipped. Remember, this is brand new! My loss is your gain!
| BIGSKYWRX | 07-17-2007 11:09 PM |
Nice STS wheel/tire combo
�
�
16x7.5 Volk TE37's wrapped w/ 225 RE01R's
details here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1306430[/url]
details here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1306430[/url]
| jc8587 | 07-17-2007 11:46 PM |
WTB: 17x8 pr 17x8.5 5x100 et 45-48 wheels
�
�
A set of good looking wheels in the size stated above. Just decent wheels, no rays/advans unless price is nice :D
Thanks!
Thanks!
| Weakness | 07-19-2007 04:58 PM |
Can you remove that "Tein Flex Coilovers *Like New*" listing it says it sold last year (damn I wanted that!)
| Craigs | 07-24-2007 08:11 AM |
Hans for sale
�
�
[url]http://forums.nasioc.com/forums/showthread.php?t=1311328[/url]
| sti752 | 07-27-2007 02:25 AM |
[QUOTE=sti752;18052800]I have for sale a set of Advanced Design Dampers with Ground control housings. They are for a 2005 STi and are double adjustable for compression and rebound and are valved for 500-800 lb springs. They were originally purchased for Stompy out of Atlanta and Joel and Tommy won several National Tours on these. I purchased them almost a year ago from Joel and this setup again won a National Tour on my car at this year's Dixie National Tour. Joel finished first in my car and I finished fourth in BSP at this event.
The rear dampers will need a rebuild as they have leaked some fluid out so the asking price is considering this.
Asking for $1200 shipped for this setup (which includes 4 dampers and 2 sets of Ground Control housings). If interested please email me @ [email][email�protected][/email] for pics and further questions.[/QUOTE]
New asking price on the setup is going to be $800 shipped. Would like to move these so if interested make a reasonable offer via email. ([email�protected])
The rear dampers will need a rebuild as they have leaked some fluid out so the asking price is considering this.
Asking for $1200 shipped for this setup (which includes 4 dampers and 2 sets of Ground Control housings). If interested please email me @ [email][email�protected][/email] for pics and further questions.[/QUOTE]
New asking price on the setup is going to be $800 shipped. Would like to move these so if interested make a reasonable offer via email. ([email�protected])
| Whiteghost 2.5 | 07-29-2007 05:11 PM |
I have 1 Subaru Speed World Challenge Chassis for sale. It is in Excellent condition. I comes with a professionally built and installed cage, front crossmember, steering rack, pedal box, master cylinder, brake lines, fire suppression lines. This car is ready for a driveline, and suspension. Perfect car for someone wanting to build up a true racecar. Can send detailed pics on request.
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Canada076.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Canada077.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/josh246.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/josh243.jpg[/IMG]
Josh
Add 3%for paypal.
Can deliver in florida for the cost of gas.
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Canada076.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Canada077.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/josh246.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/josh243.jpg[/IMG]
Josh
Add 3%for paypal.
Can deliver in florida for the cost of gas.
| CamaroFS34 | 07-30-2007 07:38 PM |
275/40R17 Hoosier A6s, brand new, mid-Maryland
�
�
Due to a.... ah.... momentary mental lapse, I have a set (4) of brand new, sticker Hoosier A6 tires, size 275/40R17 for sale.
I'm asking $1000 for all four, though I am slightly flexible on that price. From Tire Rack, these would cost more than $1200. I will also consider selling only two at a time.
I will deliver them within a reasonable distance to mid-Maryland, and I will probably be in Atlanta, Georgia the weekend of 8/18-19 for the AR night autocross.
PM or email me.
Karen
I'm asking $1000 for all four, though I am slightly flexible on that price. From Tire Rack, these would cost more than $1200. I will also consider selling only two at a time.
I will deliver them within a reasonable distance to mid-Maryland, and I will probably be in Atlanta, Georgia the weekend of 8/18-19 for the AR night autocross.
PM or email me.
Karen
| Pacobeagle | 08-01-2007 09:27 AM |
Possibly considring the sale of my 17X10 CCW Classics......Currently they are running a set of 295/35R17 Hoosier A6's.
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose
| spazegun2213 | 08-02-2007 09:11 AM |
Selling the 944... I'll give anyone on nasioc a good price for it :)
[url]http://forums.nasioc.com/forums/showthread.php?t=1317736[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1317736[/url]
| cooleyjb | 08-02-2007 04:57 PM |
sold.
| PhilC | 08-13-2007 06:51 PM |
'03 STX WRX, ESP starter car
�
�
2003 WRX, WRB. Optioned with rear spoiler, security system, factory boost gauge, electrochromatic mirror, extended arm rest. ~60,700 miles.
Prepped for STX competition.
Power:
Blitz SUS intake
GP Moto turbo inlet
PDE ceramic coated up-pipe
PDE catted down-pipe
JIC full titanium cat-back, the non-resonated one
Tuned by Doug at TopSpeed with a STX legal tune at 243WHP
Interior:
Sparco Pro 2000 driver and passenger seats on Sparco mounts and rails. Currently bottom mounted but can be swapped to side mount if you want. Driver's seat shows a bit of wear and has one cut that has been stitched up.
Schroth Rallye 4 harnesses for both passenger and driver. Driver's side got the door lap adjuster shut into the door and it is cracked but still works.
Blitz DTT turbo-timer/electronic boost gauge with peak hold
Suspension:
Custom built DA Koni wet-kit, Koni will not build these anymore but will happily service or rebuild them. Internally I've been told they are essentially 2812s built into the stock housings. Hyperco springs. JIC rear top-hats, modified Cusco camber plates in the front.
Hotchkis front and rear swaybars. Kartboy rear endlinks and Poltec fronts.
Hotchkis adjustable lateral links.
Brakes:
StopTech 328x28 BBK with black calipers up front.
Stock rear calipers.
Stainless lines front and rear.
CarboTech Bobcats front and rear.
Fresh Brembo blank rotors in the rear.
Wheels/Tires:
17x8 silver Enkei RPF-1 with 235/40-17 AD07s, shaved to 4/32nds with ~35 runs on them.
17x8 silver Enkei RPF-1 with 235/40-17 AD07s, pretty much shot but not corded.
17x7 5Zigen FN01-RC in the now discontinued hyperblack color. 225/45-17 AD07s at near full tread. About two dozen rain runs and 8 dry runs on them. These need a 3mm spacer to clear the StopTechs up front.
Misc:
STi motor, transmission and pitch stop mounts.
TiC rear differential bushings.
Whiteline KCA375 offset bushings.
Noltec steering rack bushings.
Odyssey PC680 battery.
The car had it's transmission replaced with a brand new crate transmission ~1500 miles ago. Rear differential was replaced with a used unit that had ~30,000 miles on it ~1300 miles ago.
We have every stock piece for the car except the control arm bushings, the turbo inlet and the stock wheels. Extended arm rest has been replaced by factory standard arm rest but is still available. I also have spare fender liners with minor rub holes in both. Spare transmission with bad 2nd gear, spare rear differential housing, ring and pinion. Stock front calipers with stainless lines will need a rebuild before being used again. Fresh Subaru OEM front wheel bearings and all seals needed to complete the job. Spare rear endlinks. Misc bolts, nuts and clips in OEM bags. Tactrix cable will go with the car as well. Strano front sway never installed will be included. JIC FLT-A2RS coilovers all four blown but could be rebuilt or scavenged for parts. 8k/10k springs with helpers. Ours were the only JICs I've ever driven or ridden on that weren't bouncy.
The car weighed in at 2985 in Seneca with more than 1/4 tank onboard. If you're interested I can tell you where another 40-50 pounds might be found off of that.
Car is capable of trophying with me or Jen driving and is a proven winner with a better driver. This is a great STX car that is now illegal according to the August clarification because the downpipe uses an extended O2 mount and the EGT sensor is bypassed with a resistor. With the extra parts this is a great starting point for any serious ESP build as well. Car is registered and street legal. Title is in hand.
Also available 16' Worthington all aluminum deck trailer. Stowing ramps and swing up driver's side fender. Four wheel electric brakes on dual 5000 lb axels. Weight distributing hitch. Fresh bearings ~1000 miles ago along with brake adjustment. Spare aluminum wheel with fresh tire. Axels were reinforced and modified ~2 years ago.
We'd like to get $23,000 with the trailer or $22,000 without. You'll need a truck to get the spares and parts home with you or we could probably arrange to deliver.
Lowering price to $21,000 with the trailer and $20,000 without. Want a quick sale so I don't have to part it out.
Prepped for STX competition.
Power:
Blitz SUS intake
GP Moto turbo inlet
PDE ceramic coated up-pipe
PDE catted down-pipe
JIC full titanium cat-back, the non-resonated one
Tuned by Doug at TopSpeed with a STX legal tune at 243WHP
Interior:
Sparco Pro 2000 driver and passenger seats on Sparco mounts and rails. Currently bottom mounted but can be swapped to side mount if you want. Driver's seat shows a bit of wear and has one cut that has been stitched up.
Schroth Rallye 4 harnesses for both passenger and driver. Driver's side got the door lap adjuster shut into the door and it is cracked but still works.
Blitz DTT turbo-timer/electronic boost gauge with peak hold
Suspension:
Custom built DA Koni wet-kit, Koni will not build these anymore but will happily service or rebuild them. Internally I've been told they are essentially 2812s built into the stock housings. Hyperco springs. JIC rear top-hats, modified Cusco camber plates in the front.
Hotchkis front and rear swaybars. Kartboy rear endlinks and Poltec fronts.
Hotchkis adjustable lateral links.
Brakes:
StopTech 328x28 BBK with black calipers up front.
Stock rear calipers.
Stainless lines front and rear.
CarboTech Bobcats front and rear.
Fresh Brembo blank rotors in the rear.
Wheels/Tires:
17x8 silver Enkei RPF-1 with 235/40-17 AD07s, shaved to 4/32nds with ~35 runs on them.
17x8 silver Enkei RPF-1 with 235/40-17 AD07s, pretty much shot but not corded.
17x7 5Zigen FN01-RC in the now discontinued hyperblack color. 225/45-17 AD07s at near full tread. About two dozen rain runs and 8 dry runs on them. These need a 3mm spacer to clear the StopTechs up front.
Misc:
STi motor, transmission and pitch stop mounts.
TiC rear differential bushings.
Whiteline KCA375 offset bushings.
Noltec steering rack bushings.
Odyssey PC680 battery.
The car had it's transmission replaced with a brand new crate transmission ~1500 miles ago. Rear differential was replaced with a used unit that had ~30,000 miles on it ~1300 miles ago.
We have every stock piece for the car except the control arm bushings, the turbo inlet and the stock wheels. Extended arm rest has been replaced by factory standard arm rest but is still available. I also have spare fender liners with minor rub holes in both. Spare transmission with bad 2nd gear, spare rear differential housing, ring and pinion. Stock front calipers with stainless lines will need a rebuild before being used again. Fresh Subaru OEM front wheel bearings and all seals needed to complete the job. Spare rear endlinks. Misc bolts, nuts and clips in OEM bags. Tactrix cable will go with the car as well. Strano front sway never installed will be included. JIC FLT-A2RS coilovers all four blown but could be rebuilt or scavenged for parts. 8k/10k springs with helpers. Ours were the only JICs I've ever driven or ridden on that weren't bouncy.
The car weighed in at 2985 in Seneca with more than 1/4 tank onboard. If you're interested I can tell you where another 40-50 pounds might be found off of that.
Car is capable of trophying with me or Jen driving and is a proven winner with a better driver. This is a great STX car that is now illegal according to the August clarification because the downpipe uses an extended O2 mount and the EGT sensor is bypassed with a resistor. With the extra parts this is a great starting point for any serious ESP build as well. Car is registered and street legal. Title is in hand.
Also available 16' Worthington all aluminum deck trailer. Stowing ramps and swing up driver's side fender. Four wheel electric brakes on dual 5000 lb axels. Weight distributing hitch. Fresh bearings ~1000 miles ago along with brake adjustment. Spare aluminum wheel with fresh tire. Axels were reinforced and modified ~2 years ago.
We'd like to get $23,000 with the trailer or $22,000 without. You'll need a truck to get the spares and parts home with you or we could probably arrange to deliver.
Lowering price to $21,000 with the trailer and $20,000 without. Want a quick sale so I don't have to part it out.
| sti752 | 08-27-2007 12:13 PM |
FS: MS
I have 2 315/35/R17 and 2 275/40R17 Hoosier A6's for sale. They all have 4 runs on them. Looking to get $1050 shipped. Will seperate if I have to. Pm or email me at [email][email�protected][/email] with questions or offers.
Thanks,
Brian
I have 2 315/35/R17 and 2 275/40R17 Hoosier A6's for sale. They all have 4 runs on them. Looking to get $1050 shipped. Will seperate if I have to. Pm or email me at [email][email�protected][/email] with questions or offers.
Thanks,
Brian
| Scooby South | 08-29-2007 09:20 AM |
FS: FL DATA AQUISITION
Sold...Sold...Sold
Sold...Sold...Sold
| digitalseance | 09-03-2007 06:22 PM |
Feeler (IL): TurboXS/Cusco Sponsored ESP WRX (02)
�
�
Details in thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1338852[/url]
PM w/ questions or post in OP. [B]Thinking[/B] of switching to open wheels. :confused:
[url]http://forums.nasioc.com/forums/showthread.php?t=1338852[/url]
PM w/ questions or post in OP. [B]Thinking[/B] of switching to open wheels. :confused:
| Scooby South | 09-05-2007 09:44 AM |
FS: FL
done
done
| Scooby South | 09-05-2007 04:31 PM |
Suspension up next $550 Megan Racing coilovers 10k front 6 k rear 05 STi [B]****SOLD****[/B]
TMIC (trade for your stocker STi)[B]****SOLD****[/B]
UTEC for 04/05 STi WITH BSP TUNE..Netted 327 AWHP and 360 AWtorque...Postive manifold pressure @ 1700 RPM ...full Boost 2300.....$650
Exhaust (trade for Stocker STi plus cash)$300
Factory Trailer hitch $125
AUtoX goodies....Tent....Air compressor...Magnet material....
Harness (G-Force Blue 5 point cam-lock)$50 [B]****SOLD****[/B]
Harness Bar$150 [B]****SOLD****[/B]
Whiteline 27-29 FSB$125[B]****SOLD****[/B]
Cusco 20-24 RSB$125
Simpson SA-2000 helmet...Make offer
Digital Camcorder JVC(aheeeem....Karl)...$225
...
Its all going...:)
more=
Radar gun (works awesome) $50[B]****SOLD****[/B]
Pyrometer (Laser) $50
Water tank (Bug sprayer) $10
Misc stuff....Various...
Just ask..I might have it...:)
Bill
TMIC (trade for your stocker STi)[B]****SOLD****[/B]
UTEC for 04/05 STi WITH BSP TUNE..Netted 327 AWHP and 360 AWtorque...Postive manifold pressure @ 1700 RPM ...full Boost 2300.....$650
Exhaust (trade for Stocker STi plus cash)$300
Factory Trailer hitch $125
AUtoX goodies....Tent....Air compressor...Magnet material....
Harness (G-Force Blue 5 point cam-lock)$50 [B]****SOLD****[/B]
Harness Bar$150 [B]****SOLD****[/B]
Whiteline 27-29 FSB$125[B]****SOLD****[/B]
Cusco 20-24 RSB$125
Simpson SA-2000 helmet...Make offer
Digital Camcorder JVC(aheeeem....Karl)...$225
...
Its all going...:)
more=
Radar gun (works awesome) $50[B]****SOLD****[/B]
Pyrometer (Laser) $50
Water tank (Bug sprayer) $10
Misc stuff....Various...
Just ask..I might have it...:)
Bill
| pjhe | 09-05-2007 04:40 PM |
[QUOTE=Scooby South;19277387]
Tent....Magnet material....
Digital Camcorder JVC(aheeeem....Karl)...$225
Bill[/QUOTE]
i'm intersted in what is above if it's not spoken for, tent size? is it an easy up? cam specs (if karl doesn't want it)
and why are you totally getting out of auto-x and any form of racing all together from there being such a massive list :( it's sad to seel such a complete sell off post
(i'm hoping to hear something like there is no place to race on figi)
Tent....Magnet material....
Digital Camcorder JVC(aheeeem....Karl)...$225
Bill[/QUOTE]
i'm intersted in what is above if it's not spoken for, tent size? is it an easy up? cam specs (if karl doesn't want it)
and why are you totally getting out of auto-x and any form of racing all together from there being such a massive list :( it's sad to seel such a complete sell off post
(i'm hoping to hear something like there is no place to race on figi)
| Scooby South | 09-05-2007 04:58 PM |
[QUOTE=pjhe;19277494]i'm intersted in what is above if it's not spoken for, tent size? is it an easy up? cam specs (if karl doesn't want it)
and why are you totally getting out of auto-x and any form of racing all together from there being such a massive list :( it's sad to seel such a complete sell off post
(i'm hoping to hear something like there is no place to race on figi)[/QUOTE]
It is a JVC Mini DV...JVC GR-DF550US ..Bought the wide angle lens also.
[IMG]http://www.camcorderinfo.com/images/upload/JVC%20GR-DF550/JVC-GR-DF550_vanity.jpg[/IMG]
Tent is a 10x10...EZup style...2 canopy's..Blue/Green
You can actually see it in Phils pic...directly in front of his car..
done for the year....taking a year off...Car going back to stock...
then its being put away and driven on weekends...;)...
Hopefully Barrett Jackson will be calling my cars name in oh....say.....20 years down the road...:)...
maybe down the road I will get back into it...(the wife wants a "real" vacation next year also...:rolleyes:
Bill
and why are you totally getting out of auto-x and any form of racing all together from there being such a massive list :( it's sad to seel such a complete sell off post
(i'm hoping to hear something like there is no place to race on figi)[/QUOTE]
It is a JVC Mini DV...JVC GR-DF550US ..Bought the wide angle lens also.
[IMG]http://www.camcorderinfo.com/images/upload/JVC%20GR-DF550/JVC-GR-DF550_vanity.jpg[/IMG]
Tent is a 10x10...EZup style...2 canopy's..Blue/Green
You can actually see it in Phils pic...directly in front of his car..
done for the year....taking a year off...Car going back to stock...
then its being put away and driven on weekends...;)...
Hopefully Barrett Jackson will be calling my cars name in oh....say.....20 years down the road...:)...
maybe down the road I will get back into it...(the wife wants a "real" vacation next year also...:rolleyes:
Bill
| Legacy | 09-05-2007 06:04 PM |
[QUOTE=Scooby South;19277387]
Factory Trailer hitch $125
Magnet material....
Whiteline 27-29 FSB$125
Cusco 20-24 RSB$125
Radar gun (works awesome) $50
Pyrometer (Laser) $50
Misc stuff....Various...
Bill[/QUOTE]
Interested in above, can I get more details on:
model #'s for sways to verify if they will/will not fit
Magnet material - discuss
model # for hitch (pics ?)
what's misc goodies do you have ?
If only your FNO1rC's where 5x100 I'd snatch those too
Factory Trailer hitch $125
Magnet material....
Whiteline 27-29 FSB$125
Cusco 20-24 RSB$125
Radar gun (works awesome) $50
Pyrometer (Laser) $50
Misc stuff....Various...
Bill[/QUOTE]
Interested in above, can I get more details on:
model #'s for sways to verify if they will/will not fit
Magnet material - discuss
model # for hitch (pics ?)
what's misc goodies do you have ?
If only your FNO1rC's where 5x100 I'd snatch those too
| Scooby South | 09-05-2007 09:16 PM |
another pic
[IMG]http://www.scoobysouth.net/race.jpg[/IMG]
[IMG]http://www.scoobysouth.net/yummy.jpg[/IMG]
sways fit 04-07 STi...mine is 05...
magnet material...probably 15 ft by 2ft...its what left on a industrial roll
OE trailer hitch for Impreza...purchased new june 07
:)
Bill
[IMG]http://www.scoobysouth.net/race.jpg[/IMG]
[IMG]http://www.scoobysouth.net/yummy.jpg[/IMG]
sways fit 04-07 STi...mine is 05...
magnet material...probably 15 ft by 2ft...its what left on a industrial roll
OE trailer hitch for Impreza...purchased new june 07
:)
Bill
| Scooby South | 09-06-2007 01:50 PM |
[QUOTE=Scooby South;19275919]
[B]Suspension up next $550 SOLD[/B]
[B]....along with TMIC (trade for your stocker) Done[/B]
Factory Trailer hitch $125
AUtoX goodies....Tent....Air compressor...Magnet material....
[B]Harness (G-Force Blue 5 point cam-lock)$50 SOLD[/B]
[B]Harness Bar$150 SOLD[/B]
[B]Whiteline 27-29 FSB$125 SOLD[/B]
Cusco 20-24 RSB$125
Simpson SA-2000 helmet
Digital Camcorder(aheeeem....Karl)...$225..Pending
[B]Radar gun (works awesome) $50 SOLD[/B]
Pyrometer (Laser) $50
Water tank (Bug sprayer) $10
Misc stuff....Various...
Just ask..I might have it...:)
Bill[/QUOTE]
This is whats left...:)
come and get it...:)
[B]Suspension up next $550 SOLD[/B]
[B]....along with TMIC (trade for your stocker) Done[/B]
Factory Trailer hitch $125
AUtoX goodies....Tent....Air compressor...Magnet material....
[B]Harness (G-Force Blue 5 point cam-lock)$50 SOLD[/B]
[B]Harness Bar$150 SOLD[/B]
[B]Whiteline 27-29 FSB$125 SOLD[/B]
Cusco 20-24 RSB$125
Simpson SA-2000 helmet
Digital Camcorder(aheeeem....Karl)...$225..Pending
[B]Radar gun (works awesome) $50 SOLD[/B]
Pyrometer (Laser) $50
Water tank (Bug sprayer) $10
Misc stuff....Various...
Just ask..I might have it...:)
Bill[/QUOTE]
This is whats left...:)
come and get it...:)
| Legacy | 09-06-2007 07:12 PM |
Shipping on the Whiteline 27-29 FSB to 13669 ? How many miles on it ?
Any details on that radar gun ?
Any details on that radar gun ?
| Scooby South | 09-07-2007 11:07 AM |
[QUOTE=Legacy;19291651]Shipping on the Whiteline 27-29 FSB to 13669 ? How many miles on it ?
Any details on that radar gun ?[/QUOTE]Both are gone already...sorry..
Any details on that radar gun ?[/QUOTE]Both are gone already...sorry..
| angryfist | 09-13-2007 12:39 PM |
2003 Subaru Impreza WRX � SCCA Solo2/ProSolo, STX Classification
2.0 liter Turbo, 4-cylinder, Horizontally Opposed
World Rally Blue
Optioned with painted side skirts and auto-dimming mirror with compass
~40,000 miles
Engine:
Blitz Intake
Ported Stock Headers with Swaintech Ceramic Coating
Cobb Up-pipe
Cobb Downpipe
Cobb Accessport 2.0 (tuned by AMS)
Unorthodox Racing Underdrive Pulleys
Perrin Turbo Inlet Pipe
STI Engine Mounts
STI Pitch Stop
Custom �Shorty� Exhaust
JIC Magic Titanium Exhaust with resonator
Hawker Odyssey Lightweight Battery installed in trunk
Transmission:
STI Transmission Mount
Kartboy Short Throw Shifter
TiC Shifter Pivot Bushing
TiC Rear Differential Mount Bushings
Exterior:
JDM STI Front Grill
ClearBra on Front, Headlights, and Sideskirts
40% Tint (5 windows)
Interior:
STI Gauge Cluster
Bride Seat Base w/ Rails (driver)
Sparco Seat Base (passenger)
DEFI BF Gauges with Pod
ARC Shift Knob
Boston Acoustic Pro Component Speakers
Suspension/Brakes:
Zzyzx Coilovers
Crazy Monkey Racing Front Camber/Caster Plates
Noltec Rear Camber Plates
STI Titanium Front Strut Bar
Cusco Carbon Fiber Rear Strut Bar
Cusco Rear Sway Bar
Whiteline Heavy Duty Sway Bar Mounts
Kartboy Rear Sway Bar Endlinks
Noltec Steering Rack Bushings
STI Trailing Arm Bushings
Stoptech Big Brake Kit
Endless Brake Pads
Goodridge Stainless Steel Brake Lines
Wheels/Tires:
Bridgestone RE01-R Tires
17x8 Enkei RPF-1
Car History:
2003 Solo National Championships - 3rd Place
2004 Solo National Championships - 4th Place
2005 Solo National Championships - 5th Place
2006 Solo National Championships - 5th Place
2006 ProSolo Series Championship - 1st Place
Yes, the car is up for sale again. With a bunch of new sponsors for the 2007 season, it was impossible to refuse to run this car again. Thanks to Bridgestone Tire, Zzyzx Motorsports, AMS Performance, Turn In Concepts, Hodges Subaru, Cobb Tuning, and Endless USA for their support throughout the various seasons.
Take it home from Nationals. The car will be driven at the SCCA national championships and immediately be up for sale. The car will be parted out soon after nationals, so if interested please act fast.
Asking price is $22k negotiable.
Please contact me for more details at jasonwong (at) comcast (dot) net
I am willing to work with buyer on delivery options.
[img]http://images18.fotki.com/v340/photos/6/61159/260122/jasonwong2-vi.jpg[/img]
[img]http://images18.fotki.com/v329/photos/6/61159/260122/JWong1-vi.jpg[/img]
2.0 liter Turbo, 4-cylinder, Horizontally Opposed
World Rally Blue
Optioned with painted side skirts and auto-dimming mirror with compass
~40,000 miles
Engine:
Blitz Intake
Ported Stock Headers with Swaintech Ceramic Coating
Cobb Up-pipe
Cobb Downpipe
Cobb Accessport 2.0 (tuned by AMS)
Unorthodox Racing Underdrive Pulleys
Perrin Turbo Inlet Pipe
STI Engine Mounts
STI Pitch Stop
Custom �Shorty� Exhaust
JIC Magic Titanium Exhaust with resonator
Hawker Odyssey Lightweight Battery installed in trunk
Transmission:
STI Transmission Mount
Kartboy Short Throw Shifter
TiC Shifter Pivot Bushing
TiC Rear Differential Mount Bushings
Exterior:
JDM STI Front Grill
ClearBra on Front, Headlights, and Sideskirts
40% Tint (5 windows)
Interior:
STI Gauge Cluster
Bride Seat Base w/ Rails (driver)
Sparco Seat Base (passenger)
DEFI BF Gauges with Pod
ARC Shift Knob
Boston Acoustic Pro Component Speakers
Suspension/Brakes:
Zzyzx Coilovers
Crazy Monkey Racing Front Camber/Caster Plates
Noltec Rear Camber Plates
STI Titanium Front Strut Bar
Cusco Carbon Fiber Rear Strut Bar
Cusco Rear Sway Bar
Whiteline Heavy Duty Sway Bar Mounts
Kartboy Rear Sway Bar Endlinks
Noltec Steering Rack Bushings
STI Trailing Arm Bushings
Stoptech Big Brake Kit
Endless Brake Pads
Goodridge Stainless Steel Brake Lines
Wheels/Tires:
Bridgestone RE01-R Tires
17x8 Enkei RPF-1
Car History:
2003 Solo National Championships - 3rd Place
2004 Solo National Championships - 4th Place
2005 Solo National Championships - 5th Place
2006 Solo National Championships - 5th Place
2006 ProSolo Series Championship - 1st Place
Yes, the car is up for sale again. With a bunch of new sponsors for the 2007 season, it was impossible to refuse to run this car again. Thanks to Bridgestone Tire, Zzyzx Motorsports, AMS Performance, Turn In Concepts, Hodges Subaru, Cobb Tuning, and Endless USA for their support throughout the various seasons.
Take it home from Nationals. The car will be driven at the SCCA national championships and immediately be up for sale. The car will be parted out soon after nationals, so if interested please act fast.
Asking price is $22k negotiable.
Please contact me for more details at jasonwong (at) comcast (dot) net
I am willing to work with buyer on delivery options.
[img]http://images18.fotki.com/v340/photos/6/61159/260122/jasonwong2-vi.jpg[/img]
[img]http://images18.fotki.com/v329/photos/6/61159/260122/JWong1-vi.jpg[/img]
| kotty | 09-14-2007 03:56 AM |
ah,okey
| jcroy66 | 09-14-2007 09:22 AM |
[URL]http://forums.nasioc.com/forums/showpost.php?p=19033783&postcount=94[/URL]
[quote=PhilC;19033783]2003 WRX, WRB. Optioned with rear spoiler, security system, factory boost gauge, electrochromatic mirror, extended arm rest. ~60,700 miles. Prepped for STX competition [FULL DESCRIPTION CAN BE FOUND IN ORIGINAL POST LINK].[/quote]
Update: Final price drop to $18,000 for the car. If it doesn't sell at that price point, we'll part it out.
[quote=PhilC;19033783]2003 WRX, WRB. Optioned with rear spoiler, security system, factory boost gauge, electrochromatic mirror, extended arm rest. ~60,700 miles. Prepped for STX competition [FULL DESCRIPTION CAN BE FOUND IN ORIGINAL POST LINK].[/quote]
Update: Final price drop to $18,000 for the car. If it doesn't sell at that price point, we'll part it out.
| aus_taz | 09-17-2007 01:50 PM |
WTB Used r-comps 235-255 R17's (new if really cheap...)
�
�
Looking for a set of used r-comps, maybe 2 sets. My seconds set of re070's this season is getting pretty worn and I'm having trouble finding cheap takeoffs.
What type doesn't really matter (A048, Toyo, Pilot sport cup's) use will be HDPE's and auto-x does not have to be DOT approved.
thanks
What type doesn't really matter (A048, Toyo, Pilot sport cup's) use will be HDPE's and auto-x does not have to be DOT approved.
thanks
| onur | 09-17-2007 06:26 PM |
ECUs and more
�
�
We released a new section on our website where we will be selling used or clearance items. For now we have the following: (follow the link to see pricing, pics and item conditions)
[url]http://www.rocketrally.com/website/index.php?option=com_oscommerce&osMod=index&cPath=310[/url]
- AccessPort v1.0 - 02/03 WRX
- AccessPort v2.0 - 05 STI
- Link 02-05 WRX "Plug & Play"Standalone ECU
- Link+ Standalone ECU with Anti-Lag
- Neetronics PDC-01 DCCD Controller 04+ USDM WRX STI
- Stack 81015 "USA" Dash Display Complete Unit with Sensors
- TurboXS UTEC ECU - 03 WRX
[url]http://www.rocketrally.com/website/index.php?option=com_oscommerce&osMod=index&cPath=310[/url]
- AccessPort v1.0 - 02/03 WRX
- AccessPort v2.0 - 05 STI
- Link 02-05 WRX "Plug & Play"Standalone ECU
- Link+ Standalone ECU with Anti-Lag
- Neetronics PDC-01 DCCD Controller 04+ USDM WRX STI
- Stack 81015 "USA" Dash Display Complete Unit with Sensors
- TurboXS UTEC ECU - 03 WRX
| AshyLarry | 09-17-2007 08:11 PM |
[url]http://forums.nasioc.com/forums/showthread.php?t=1345461[/url]
225/50/16 Hankook Z211's on wrx stockers.
225/50/16 Hankook Z211's on wrx stockers.
| Ottawagon | 09-25-2007 11:07 AM |
Anyone know of a sparco evo2 seat for sale somewhere? Thanks.
| shane86 | 09-26-2007 10:25 AM |
[b]1. Corbeau Driver Seat base with Double Locking Sliders for Subaru Impreza - $100[/b]
Ok, Bought this with the Corbeau Side mounts in the plan of installing my FX1. Well, Corbeau failed to mention that their seat base doesn't attach to their sliders at all, anywhere. So this isn't going to work for me, as the seat i'm using is a rigid, so i really need the rake and height adjustment of side mounts, and since i'm not the only one who drives the car in anger, i need the slide to adjust for other people. The double locking slider is a special order option on Corbeau bases, and is an extra $30 if i recall correctly. it yields a much more stable seat base and is personally recommended for aggressive drivers. the base has NEVER been installed.
[b]2. Corbeau Aluminum Side Mount system for Corbeau/Sparco Seats - $100[/b]
This is Corbeau's absurdly adjustable, insanely light side mount setup for most sidemount seats. the whole thing maybe weighs 1-2lbs, and it's excessively sturdy. these are known for their use in many road race vehicles. Installing these will give you full adjust ability over seat position, Seat height, and Seat rake and can be adjusted quite quickly for a side mount setup.
They WILL NOT bolt to a seat base/slider setup. They will require some vehicle modification to fit. They're perfect for anyone building a drag/drift/track car, who's worried about weight.
All Prices are before s/h.
Ok, Bought this with the Corbeau Side mounts in the plan of installing my FX1. Well, Corbeau failed to mention that their seat base doesn't attach to their sliders at all, anywhere. So this isn't going to work for me, as the seat i'm using is a rigid, so i really need the rake and height adjustment of side mounts, and since i'm not the only one who drives the car in anger, i need the slide to adjust for other people. The double locking slider is a special order option on Corbeau bases, and is an extra $30 if i recall correctly. it yields a much more stable seat base and is personally recommended for aggressive drivers. the base has NEVER been installed.
[b]2. Corbeau Aluminum Side Mount system for Corbeau/Sparco Seats - $100[/b]
This is Corbeau's absurdly adjustable, insanely light side mount setup for most sidemount seats. the whole thing maybe weighs 1-2lbs, and it's excessively sturdy. these are known for their use in many road race vehicles. Installing these will give you full adjust ability over seat position, Seat height, and Seat rake and can be adjusted quite quickly for a side mount setup.
They WILL NOT bolt to a seat base/slider setup. They will require some vehicle modification to fit. They're perfect for anyone building a drag/drift/track car, who's worried about weight.
All Prices are before s/h.
| 555ideways | 09-26-2007 09:14 PM |
'99 RS STi swap - turn key race car
�
�
[URL=http://imageshack.us][IMG]http://img221.imageshack.us/img221/5957/rk3u1512ug6.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img237.imageshack.us/img237/1746/img1520ao1.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img165.imageshack.us/img165/7766/rk3u2948xi5.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img170.imageshack.us/img170/397/dsc8794na0.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img219.imageshack.us/img219/6143/dsc8913sw4.jpg[/IMG][/URL]
Very sorted RS track car with 2004 US STi swap. This car was put together at the beginning of the 2007 season by my brother, (eastcoastbumps) and I. We've been working out the bugs event by event. The development is 100% finished. It drives amazing, the balance is excellent, the power is a blast and the brakes are super confidence inspiring. There's nothing left to do but drive and have fun. All the hard work has been done.
Specs:
[B]99 RS chassis [/B]
roughly 65k miles
6 point cage from autopower, bolt in, nascar door bars
FIA sanctioned HD roll bar padding - the good stuff
Sparco Pro 2000 driver seat
Sparco Sprint Passenger Seat
Original seats available
Sparco suede steering wheel
Sparco 5 point harnesses FIA date stamped until 2011 (used 1 track day)
EGT and boost gauges mounted in the clock space
04 WRX cluster with tach in the middle
[B]Engine/Driveline[/B]
04 STi US spec
~15k miles
Full catless 3 inch exhaust
2006 5 spd transmission ~15k miles
3.90 final drive
STi rear differential/axles/brembos
OEM 04 US STi engine/bulkhead/chassis wiring harness - (never worry about shady wiring - we've NEVER had a wiring bug EVER)
[B]Brakes[/B]
Stoptech 328x28 Big Brake Kit up front
Pagid yellow race pads (spare street pads included)
OEM Brembos with Pagid Yellow race pads rear (spare street pads included)
Stainless lines
high temp fluid
free bottle of Motul rbf650
[B]Suspension & Tire[/B]
Tein Flex 8k 10k - 3000 miles
Stock sways
Performance alignment - we spent hundreds of dollars getting this setup just right on the alignment rack
Wheel bearings just serviced by DSG
BBS wheels wrapped in 235 RA-1s
Free set of victoracers
This car is a race car, it has dents and scratches. It's not a stellar show piece - it was purpose built to hustle. We've poured a lot of time and effort into this car. It's fast and seriously fun. Car did a 1:55 at Circuit Mont Tremblant, 1:25 at Calabogie Motorsports Park. Will easily click of a 1:01 at Lime Rock. It kills us to sell it but we gotta pay some bills! I'd glady be track support for a day, all i need is a beer and a lounge chair.
$16,500
[URL=http://imageshack.us][IMG]http://img237.imageshack.us/img237/1746/img1520ao1.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img165.imageshack.us/img165/7766/rk3u2948xi5.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img170.imageshack.us/img170/397/dsc8794na0.jpg[/IMG][/URL]
[URL=http://imageshack.us][IMG]http://img219.imageshack.us/img219/6143/dsc8913sw4.jpg[/IMG][/URL]
Very sorted RS track car with 2004 US STi swap. This car was put together at the beginning of the 2007 season by my brother, (eastcoastbumps) and I. We've been working out the bugs event by event. The development is 100% finished. It drives amazing, the balance is excellent, the power is a blast and the brakes are super confidence inspiring. There's nothing left to do but drive and have fun. All the hard work has been done.
Specs:
[B]99 RS chassis [/B]
roughly 65k miles
6 point cage from autopower, bolt in, nascar door bars
FIA sanctioned HD roll bar padding - the good stuff
Sparco Pro 2000 driver seat
Sparco Sprint Passenger Seat
Original seats available
Sparco suede steering wheel
Sparco 5 point harnesses FIA date stamped until 2011 (used 1 track day)
EGT and boost gauges mounted in the clock space
04 WRX cluster with tach in the middle
[B]Engine/Driveline[/B]
04 STi US spec
~15k miles
Full catless 3 inch exhaust
2006 5 spd transmission ~15k miles
3.90 final drive
STi rear differential/axles/brembos
OEM 04 US STi engine/bulkhead/chassis wiring harness - (never worry about shady wiring - we've NEVER had a wiring bug EVER)
[B]Brakes[/B]
Stoptech 328x28 Big Brake Kit up front
Pagid yellow race pads (spare street pads included)
OEM Brembos with Pagid Yellow race pads rear (spare street pads included)
Stainless lines
high temp fluid
free bottle of Motul rbf650
[B]Suspension & Tire[/B]
Tein Flex 8k 10k - 3000 miles
Stock sways
Performance alignment - we spent hundreds of dollars getting this setup just right on the alignment rack
Wheel bearings just serviced by DSG
BBS wheels wrapped in 235 RA-1s
Free set of victoracers
This car is a race car, it has dents and scratches. It's not a stellar show piece - it was purpose built to hustle. We've poured a lot of time and effort into this car. It's fast and seriously fun. Car did a 1:55 at Circuit Mont Tremblant, 1:25 at Calabogie Motorsports Park. Will easily click of a 1:01 at Lime Rock. It kills us to sell it but we gotta pay some bills! I'd glady be track support for a day, all i need is a beer and a lounge chair.
$16,500
| Rzoops | 10-01-2007 02:53 PM |
WTB: 225/50-16 R-comps.. the less tread the better (only need for 2-4 autocrosses)
If they're already mounted on stock 16x6.5 wheels.. even better :)
If they're already mounted on stock 16x6.5 wheels.. even better :)
| FTD | 10-02-2007 08:43 PM |
2007 STX National Champ car for sale
�
�
Please see the following post:
[url]http://forums.nasioc.com/forums/showthread.php?t=1358360[/url]
Thanks!
Chris Fenter
[url]http://forums.nasioc.com/forums/showthread.php?t=1358360[/url]
Thanks!
Chris Fenter
| Modifying | 10-03-2007 01:53 AM |
Can you please add this in?
[url]http://forums.nasioc.com/forums/showthread.php?t=1357032[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1357032[/url]
| ejh25 | 10-12-2007 02:24 PM |
This thread still active?
Can you add something for me?
For some reason I'm having difficult PM'ing.
Here's the thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1345202[/url]
Can you add something for me?
For some reason I'm having difficult PM'ing.
Here's the thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1345202[/url]
| STEALTH-WRX | 10-18-2007 12:24 AM |
FS: Falken Azenis RT-615 255/40/18 Brand New
�
�
Brand New Falken Azenis RT-615 255/40/18
Hey guys, I was going to use these for my Evo but I decided to save my money instead. These are brand new and have been sitting in my garage for under 30 days.
I want $500 for all of these as that Is what I paid for them.
These retail for about $800 and can be found on the cheapest websites for $676 so this is a smoking deal.
Here is the link: [url]http://forums.nasioc.com/forums/showthread.php?t=1359428[/url]
PM me or reply.
__________________
[url]http://drag.nickslife.net[/url]
Check it out. Its my own Blackhole of a car.
Hey guys, I was going to use these for my Evo but I decided to save my money instead. These are brand new and have been sitting in my garage for under 30 days.
I want $500 for all of these as that Is what I paid for them.
These retail for about $800 and can be found on the cheapest websites for $676 so this is a smoking deal.
Here is the link: [url]http://forums.nasioc.com/forums/showthread.php?t=1359428[/url]
PM me or reply.
__________________
[url]http://drag.nickslife.net[/url]
Check it out. Its my own Blackhole of a car.
Không có nhận xét nào:
Đăng nhận xét