| pzary3233 | 06-13-2008 07:10 PM |
[QUOTE=angryfist;22538995]Bridgestone RE01R
235/40/17
shaved to 4/32. less than 10 runs
$400 plus shipping.[/QUOTE]
Still have these?
235/40/17
shaved to 4/32. less than 10 runs
$400 plus shipping.[/QUOTE]
Still have these?
| Whiteghost 2.5 | 06-16-2008 07:42 PM |
I have a Subaru GD body Chassis that was being prepped for Speed World Challenge competition, I got it with the intent of building a Time Attack racer out of it. The Chassis has been professionally caged. Chassis comes with F&R crossmembers, control arms (forged), rear lateral links, 5x100 hubs with front ball joint extenders and extended arp wheel studs, front bumper 04-05 or 06, rear trunk, 4 doors gutted and clearanced for cage, dash, steering column, Fuse panel, switch panel with brake bias knob.
$3500 + shipping
Just back from sandblasting and sealer priming
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis047.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis050.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis049.jpg[/IMG]
Painted Satin Black
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3099.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
05 sti steering rack $200 + shipping
05 sti crossmember $100 + shipping
Hotchkis Competition sway bars ( bars only) $300 + shipping
Add 3% for paypal.
email me with all questions.
Thanks
Josh
$3500 + shipping
Just back from sandblasting and sealer priming
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis047.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis050.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis049.jpg[/IMG]
Painted Satin Black
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3099.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
05 sti steering rack $200 + shipping
05 sti crossmember $100 + shipping
Hotchkis Competition sway bars ( bars only) $300 + shipping
Add 3% for paypal.
email me with all questions.
Thanks
Josh
| pzary3233 | 06-16-2008 07:47 PM |
Wow that would be awesome if I had the extra cash!
| MattNJ2.8 | 06-16-2008 09:52 PM |
FREE / Pickup Race Tires, Street Tires, Central NJ
�
�
Free to pickup here in Central NJ. Great for test fitting, etc. Send PM if you want to come over and see them or take them. Did I mention they're FREE?
I will "hold" them for you for a day or two in exchange for a 6 or 12 pack of my favorite beer.
4 Kumho MX's, about 40% tread left, good condition. 245/45/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008012.jpg[/IMG]
2 Kumho Victoracers, 30% life left 255/40/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008013.jpg[/IMG]
2 Bridgestone Potenza RE050's, great condition 245/40/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008014.jpg[/IMG]
2 ContiSport Contact Tires 235/45/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008015.jpg[/IMG]
I will "hold" them for you for a day or two in exchange for a 6 or 12 pack of my favorite beer.
4 Kumho MX's, about 40% tread left, good condition. 245/45/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008012.jpg[/IMG]
2 Kumho Victoracers, 30% life left 255/40/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008013.jpg[/IMG]
2 Bridgestone Potenza RE050's, great condition 245/40/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008014.jpg[/IMG]
2 ContiSport Contact Tires 235/45/17
[IMG]http://i153.photobucket.com/albums/s236/Matt28NJ/June2008015.jpg[/IMG]
| gregr01 | 06-16-2008 10:35 PM |
SSR Comp 17x8.5 +48 w/255/40/17 Toyo RA-1
�
�
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537374"]SSR Comp 17x8.5 +48 w/255/40/17 Toyo RA-1[/URL]
Wheels in excellent condition.
Tires have no heat cycles, no autox runs.
$1750, in Phoenix AZ
See above link for full description and images.
Also available:
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537366"]Sparco driver's suit (ex-CART)[/URL]
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537356"]G-Force 5-point camlock harnesses (pair)[/URL]
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537352"]Speedware harness bar, STi or WRX[/URL]
[IMG]http://www.randomelement.com/ebay/toyo-ra1-ssr-3.jpg[/IMG]
Wheels in excellent condition.
Tires have no heat cycles, no autox runs.
$1750, in Phoenix AZ
See above link for full description and images.
Also available:
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537366"]Sparco driver's suit (ex-CART)[/URL]
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537356"]G-Force 5-point camlock harnesses (pair)[/URL]
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537352"]Speedware harness bar, STi or WRX[/URL]
[IMG]http://www.randomelement.com/ebay/toyo-ra1-ssr-3.jpg[/IMG]
| Pacobeagle | 06-18-2008 06:36 PM |
[QUOTE=Pacobeagle;21845635]CCW's still for sale!!!! MAKE OFFER!!!!!!!!![/QUOTE]
Still sitting in my garage.......hopefully in yours soon.
Let me know or call me at 561-628-2765.
Jose
Still sitting in my garage.......hopefully in yours soon.
Let me know or call me at 561-628-2765.
Jose
| Homemade WRX | 06-18-2008 07:18 PM |
holy cow...those are still for sale!! I still want them but still don't have the money :lol:
bump for a nice set of wheels!
bump for a nice set of wheels!
| gregr01 | 06-19-2008 11:10 PM |
[URL="http://forums.nasioc.com/forums/showthread.php?t=1537352"]Speedware harness bar and pair of G-Force 5-point cam-lock harnesses[/URL]
[B]$400 shipped anywhere in the continental U.S.![/B]
[IMG]http://www.randomelement.com/ebay/harness-bar-2.jpg[/IMG]
[IMG]http://www.randomelement.com/ebay/harness-1.jpg[/IMG]
[B]$400 shipped anywhere in the continental U.S.![/B]
[IMG]http://www.randomelement.com/ebay/harness-bar-2.jpg[/IMG]
[IMG]http://www.randomelement.com/ebay/harness-1.jpg[/IMG]
| akuhner | 06-21-2008 10:37 PM |
[URL="http://forums.nasioc.com/forums/showthread.php?t=1541643"]FS (NYC) - Project 1.8L Impreza Rally Car[/URL]
$2,500
See my other post for details
[IMG]http://i.pbase.com/g6/71/480571/2/81748576.jKZva2eS.jpg[/IMG]
$2,500
See my other post for details
[IMG]http://i.pbase.com/g6/71/480571/2/81748576.jKZva2eS.jpg[/IMG]
| randallhsmith | 06-23-2008 10:22 PM |
selling an STi
�
�
selling a 2006 sti
| BIGSKYWRX | 06-23-2008 10:29 PM |
[QUOTE=randallhsmith;22744885]selling a 2006 sti[/QUOTE]
and ...........??????
I'm thinking about selling my toaster :lol:
and ...........??????
I'm thinking about selling my toaster :lol:
| metros | 06-23-2008 10:51 PM |
[QUOTE=randallhsmith;22744885]selling a 2006 sti[/QUOTE]
His other thread said 2007 STi
Scammer?
His other thread said 2007 STi
Scammer?
| growling_boxer | 06-24-2008 11:21 AM |
[quote=BIGSKYWRX;22744977]and ...........??????
I'm thinking about selling my toaster :lol:[/quote]
how much for the toaster? and does it come with a dyno sheet?
I'm thinking about selling my toaster :lol:[/quote]
how much for the toaster? and does it come with a dyno sheet?
| S1MPSONS | 06-24-2008 01:22 PM |
For Sale: NYC: Enkei RPF-1 17x8 45mm Offset with New Bridgestone Potenza RE01R Tires 245/45/17. $1300 picked up. Tires have <1000 miles and ~10 autox runs. Lots of tire tread/life!!!
| dunk | 06-24-2008 01:25 PM |
For Sale.
CCW Wheels spacers, one pair of 4mm and one pair of 10mm. The 10mm are 5x100, but the 4mm are dual drilled for 5x114.3 as well.
Six Gun Ball Joint Extenders.
250 obo. One of the threaded tie rod adapters will need to be replaced as it's stripped. The part will cost 75 dollars shipped to fix.
[img]http://www.ellisfamilyalbum.com/Car%20stuff/For%20Sale/six%20gun/slides/IMG_2652.JPG[/img]
[img]http://www.ellisfamilyalbum.com/Car%20stuff/For%20Sale/six%20gun/slides/IMG_2649.JPG[/img]
Duncan
CCW Wheels spacers, one pair of 4mm and one pair of 10mm. The 10mm are 5x100, but the 4mm are dual drilled for 5x114.3 as well.
Six Gun Ball Joint Extenders.
250 obo. One of the threaded tie rod adapters will need to be replaced as it's stripped. The part will cost 75 dollars shipped to fix.
[img]http://www.ellisfamilyalbum.com/Car%20stuff/For%20Sale/six%20gun/slides/IMG_2652.JPG[/img]
[img]http://www.ellisfamilyalbum.com/Car%20stuff/For%20Sale/six%20gun/slides/IMG_2649.JPG[/img]
Duncan
| Pacobeagle | 06-25-2008 09:08 AM |
bumpy
| dunk | 06-25-2008 05:03 PM |
I'll take 200 shipped for the ball joint extenders
Duncan
Duncan
| Homemade WRX | 06-25-2008 06:23 PM |
how about picked up?... :p
guess not logging on yesterday was a good thing ;)
I had completely forgotten about these at the perry meet.
guess not logging on yesterday was a good thing ;)
I had completely forgotten about these at the perry meet.
| dunk | 06-25-2008 06:46 PM |
Send me your best offer via pm.
Duncan
Duncan
| mpj_becks | 07-02-2008 12:16 AM |
Prodrive Ohlins tarmac aditions coilovers
�
�
I have a set of freshly revalved Prodrive Ohlins tarmac addition triple adjustable coilovers for sale, they have had droop limiters installed and have been reshimed and valved for road racing. The come with 8 different spring rates and the shock dyno graphs from the recent revalve.
The rear top hats have been modified for a GC8 but most camber plates can be adapted to work with them.
Here is a picture of them when they were new
[img]http://i11.tinypic.com/5yd9xe0.jpg[/img]
Anyone who knows about these coilovers knows they are as good as they get and cost in the region of $14-$16k new.
Looking to get $6500 shipped anywhere in the US including all the springs I have.
The rear top hats have been modified for a GC8 but most camber plates can be adapted to work with them.
Here is a picture of them when they were new
[img]http://i11.tinypic.com/5yd9xe0.jpg[/img]
Anyone who knows about these coilovers knows they are as good as they get and cost in the region of $14-$16k new.
Looking to get $6500 shipped anywhere in the US including all the springs I have.
| mpj_becks | 07-02-2008 01:13 AM |
Sorry I should mention the Ohlins is the coilover on the right compared against a KW V3.
| Patrick Olsen | 07-02-2008 02:44 AM |
[QUOTE=Pacobeagle;18902361]Possibly considring the sale of my 17X10 CCW Classics......Currently they are running a set of 295/35R17 Hoosier A6's.
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose[/QUOTE]
Jose - What's the offset on the wheels, and what are you looking to get? I may be interested for my Mustang, but it would depend on what the offset is now and whether I'd be able to have the shells swapped to get the offset I need.
Pat Olsen
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose[/QUOTE]
Jose - What's the offset on the wheels, and what are you looking to get? I may be interested for my Mustang, but it would depend on what the offset is now and whether I'd be able to have the shells swapped to get the offset I need.
Pat Olsen
| Patrick Olsen | 07-02-2008 02:45 AM |
I'm cleaning out the garage of old stuff that I don't need anymore. I'm on my 4th spring combination with Koni/GC setup, and I don't need all the old springs that I've used in the past. So, they're up for grabs.
All springs are Eibach ERS, and all are 2.5" diameter.
2 10" long, 200#
2 10" long, 225#
2 10" long, 325# - [COLOR="Red"]SOLD[/COLOR]
2 9" long, 290#
I don't know what the going rate is for used coil-over springs, so I'll say $40 a pair. I think that's about 1/3 what new ones cost, so that seems reasonable. If it's not, let me know. Buyer pays actual shipping cost from 98383.
Pat Olsen
All springs are Eibach ERS, and all are 2.5" diameter.
2 10" long, 200#
2 10" long, 225#
2 10" long, 325# - [COLOR="Red"]SOLD[/COLOR]
2 9" long, 290#
I don't know what the going rate is for used coil-over springs, so I'll say $40 a pair. I think that's about 1/3 what new ones cost, so that seems reasonable. If it's not, let me know. Buyer pays actual shipping cost from 98383.
Pat Olsen
| xcdhridr | 07-02-2008 02:21 PM |
I think I have some 245/40/17/ advan neova's for sale. about 3-4/32nds. One has some shoulder wear but still has tread.
Interested? PM me
Interested? PM me
| crystalhelix | 07-03-2008 10:57 AM |
[url]http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300238792519[/url]
17X10 +25 5X114.3 wheels 5Zigen FNO1R-C, finally on E-bay, figured I'd post it here.
17X10 +25 5X114.3 wheels 5Zigen FNO1R-C, finally on E-bay, figured I'd post it here.
| highdensity | 07-05-2008 02:55 AM |
Pair of BLACK Corbeau GTS-II seats - $500 OBO + SHIPPING. great condition except for a bit of damage to the cover that goes over the reclining lever. i had to patch it together with epoxy, but there's still a bit of damage on the outside surface of the cover. in any case, you should be able to get these new from Corbeau.
CORBEAU PHOTOS HERE: [url]http:[email�protected]/sets/72157605920443200/[/url]
CORBEAU PHOTOS HERE: [url]http:[email�protected]/sets/72157605920443200/[/url]
| pzary3233 | 07-05-2008 11:09 AM |
I have the following polyurethane suspension bushings for sale. Prices are what I paid for them (I never installed them), and the are rather firm. The bushings were used in an Auto X car that was not street driven and have very few miles.
* Trailing arms with the front bushing $80
* rear trailing arm bushing $40
* Front control arm Front Bushings $30
* Whiteline Front Control Arm Offset Bushing (KCA375) $80
* This is an STX LEGAL ALK!
These parts are small so shipping isn't bad at all.
[url]http://forums.nasioc.com/forums/showthread.php?p=22874011#post22874011[/url]
PM me or post with any questions!
* Trailing arms with the front bushing $80
* rear trailing arm bushing $40
* Front control arm Front Bushings $30
* Whiteline Front Control Arm Offset Bushing (KCA375) $80
* This is an STX LEGAL ALK!
These parts are small so shipping isn't bad at all.
[url]http://forums.nasioc.com/forums/showthread.php?p=22874011#post22874011[/url]
PM me or post with any questions!
| Pacobeagle | 07-07-2008 01:52 PM |
[QUOTE=Pacobeagle;22689691]Still sitting in my garage.......hopefully in yours soon.
Let me know or call me at 561-628-2765.
Jose[/QUOTE]
bumpy
Let me know or call me at 561-628-2765.
Jose[/QUOTE]
bumpy
| maengelito | 07-09-2008 10:34 AM |
[QUOTE=maengelito;21782415]anyone need some XP-9's for the STi brembo caliper?
[url]http://forums.nasioc.com/forums/showthread.php?t=1389008[/url][/QUOTE]
new lower price, $90 shipped!
[url]http://forums.nasioc.com/forums/showthread.php?t=1389008[/url][/QUOTE]
new lower price, $90 shipped!
| 409Industries | 07-14-2008 12:45 AM |
FS: Pre-bent Rollcage Kit for a GD (02-07) Impreza (4 Main Bars)
�
�
FS: Pre-bent Rollcage Kit for a GD (02-07) Impreza (4 Main Bars)
This is a �kit� in the sense that all the main roll bars are already pre-bent and will fit in a GD Impreza. It was designed, built, and sold by Placar in southern California, and this is the last kit that I know of still around. The most difficult pieces necessary to build a rollcage are already measured, bent, and ready to go. All you need to do is weld them in. This is NOT a bolt in cage. Auxiliary bars are not included and it is recommended that they be installed with these to further reinforce your cage.
Here are the three bars that go inside the cabin, from left to right there is the windshield visor bar, and two � lateral bars (that connect the main hoop down to the bottom of the A pillar). All the bars are in great condition, they will just need to be sanded a bit to be painted.
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_001.jpg[/IMG]
The main hoop:
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_003.jpg[/IMG]
There was a car at the shop that has this exact kit installed (obviously with more auxiliary bars) so I snapped some shots to illustrate which bars go where.
Windshield bar
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_005.jpg[/IMG]
Main hoop:
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_006.jpg[/IMG]
� lateral bar (x2 identical on the passenger side):
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_011.jpg[/IMG]
This is not currently FIA / Rally America / NASA legal as it was constructed from 1.5� x .095 DOM metal tubing. It is perfect for the weekend track warrior, rallycrosser, autox enthusiast or someone who just wants to step up the safety of their car.
Local pickups are preferred, but I will ship. I will provide you a shipping quote if you are interested. PM me for more details.
$450 obo
This is a �kit� in the sense that all the main roll bars are already pre-bent and will fit in a GD Impreza. It was designed, built, and sold by Placar in southern California, and this is the last kit that I know of still around. The most difficult pieces necessary to build a rollcage are already measured, bent, and ready to go. All you need to do is weld them in. This is NOT a bolt in cage. Auxiliary bars are not included and it is recommended that they be installed with these to further reinforce your cage.
Here are the three bars that go inside the cabin, from left to right there is the windshield visor bar, and two � lateral bars (that connect the main hoop down to the bottom of the A pillar). All the bars are in great condition, they will just need to be sanded a bit to be painted.
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_001.jpg[/IMG]
The main hoop:
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_003.jpg[/IMG]
There was a car at the shop that has this exact kit installed (obviously with more auxiliary bars) so I snapped some shots to illustrate which bars go where.
Windshield bar
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_005.jpg[/IMG]
Main hoop:
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_006.jpg[/IMG]
� lateral bar (x2 identical on the passenger side):
[IMG]http://www.dirtyimpreza.com/hosting/imagehosting/cage_kit/cage_kit_011.jpg[/IMG]
This is not currently FIA / Rally America / NASA legal as it was constructed from 1.5� x .095 DOM metal tubing. It is perfect for the weekend track warrior, rallycrosser, autox enthusiast or someone who just wants to step up the safety of their car.
Local pickups are preferred, but I will ship. I will provide you a shipping quote if you are interested. PM me for more details.
$450 obo
| Mr_Snips | 07-14-2008 12:47 AM |
i have them for you...i have a set of DA coilovers which are comparable to Ksports very top of the line coilovers. these were 2000+ new. I just dont want them anymore, they are too much for me since i drive a forester. They have height adjustability and dampening(12 clicks front and rear)(the shaft isnt in the rears in the pic). Very very very nice and i'll let them go for $700. depending on shipping cost i'll include it in the 700 if its not 100 to ship...but i'll give you a deal.
[IMG]http://i307.photobucket.com/albums/nn312/j1168osh/100_1343.jpg?t=1211847885[/IMG]
[IMG]http://i307.photobucket.com/albums/nn312/j1168osh/100_1343.jpg?t=1211847885[/IMG]
| pzary3233 | 07-14-2008 02:01 AM |
[url]http://forums.nasioc.com/forums/showthread.php?t=1553608[/url]
[quote]
Alright, I've gotta go back to stock for a multitude of reasons... So here is a chance to own a great suspension at a great price! You're not only paying for parts, but the time and research that I went though to come up with these spring rates and parts, getting them to work properly together.
[COLOR="Red"]$1200.00[/COLOR]
Click my sig for the build thread!
[URL="http://www.clubwrx.net/forums/auto-x-track-circuit/134293047-project-stx-sedan-thread.html"]Thread[/URL]
What does it come with you say?
[B]*Koni inserts front and rear.[/B] The fronts have 3k miles on them and the rears have 5k miles. I have an extra set of fronts that are supposedly blown that can be sent out for a rebuild at a fraction of the cost of a new set. They are adjustable and there are shock dynographs in my build thread! Stock through 600# springs can be paired with these strut inserts.
[B]*Wagon strut bodies[/B] - These will give you MORE static camber when used on a sedan. in the rear without going to a camber plate I have -2.1 degrees of camber with cross camber at 0. AWESOME!
[B]*D_Rex Bump Extenders [/B]- you gain back about 3/4" of bump travel when using these extenders on your front struts! I can't imagine Koni inserts without them!
[B]
*Ground Control Adjustable Springs[/B] - 450# front and rear. The car handles great with these but is compliant enough that the girlfriend approves. I've gone on one 1k mile road trip and it was great. It wasn't a harsh ride.
[B]*Race Comp Engineering LOWERING Camber Plates[/B]-You can't get these anymore!!! They are back ordered from RCE! These help with the bump travel even more! by lowering the car another 3/8" without sacrificing bump travel. They are awesome plates and I would use them again in a heart beat if I ever rebuild the WRX for more than DD duty.
This setup if regionally competitive with a decent drive and good tires! I consistently have been finishing in the top 10 in 60 driver events in PAX. I've won a few STX classes as well.
Pic time!
[IMG]http://i39.photobucket.com/albums/e197/Pzary3233/DSC_0130.jpg[/IMG]
[img]http://i39.photobucket.com/albums/e197/Pzary3233/Auto%20X%20May%2019th/DSC_0224.jpg[/img]
^waiting for action
[img]http://i39.photobucket.com/albums/e197/Pzary3233/WRX/DSC_0146.jpg[/img]
Dumped
Paired with my suspension bushings which can be bought here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1550397[/url]
And 22mm swaybars all around or even a 24mm front bar, you would have an AWESOME setup with some sticky tires!
The suspension is currently on the car and once a buyer is found I will take it off of the car. I would rather keep it all together unless someone can work out something so that everything is sold.[/quote]
[quote]
Alright, I've gotta go back to stock for a multitude of reasons... So here is a chance to own a great suspension at a great price! You're not only paying for parts, but the time and research that I went though to come up with these spring rates and parts, getting them to work properly together.
[COLOR="Red"]$1200.00[/COLOR]
Click my sig for the build thread!
[URL="http://www.clubwrx.net/forums/auto-x-track-circuit/134293047-project-stx-sedan-thread.html"]Thread[/URL]
What does it come with you say?
[B]*Koni inserts front and rear.[/B] The fronts have 3k miles on them and the rears have 5k miles. I have an extra set of fronts that are supposedly blown that can be sent out for a rebuild at a fraction of the cost of a new set. They are adjustable and there are shock dynographs in my build thread! Stock through 600# springs can be paired with these strut inserts.
[B]*Wagon strut bodies[/B] - These will give you MORE static camber when used on a sedan. in the rear without going to a camber plate I have -2.1 degrees of camber with cross camber at 0. AWESOME!
[B]*D_Rex Bump Extenders [/B]- you gain back about 3/4" of bump travel when using these extenders on your front struts! I can't imagine Koni inserts without them!
[B]
*Ground Control Adjustable Springs[/B] - 450# front and rear. The car handles great with these but is compliant enough that the girlfriend approves. I've gone on one 1k mile road trip and it was great. It wasn't a harsh ride.
[B]*Race Comp Engineering LOWERING Camber Plates[/B]-You can't get these anymore!!! They are back ordered from RCE! These help with the bump travel even more! by lowering the car another 3/8" without sacrificing bump travel. They are awesome plates and I would use them again in a heart beat if I ever rebuild the WRX for more than DD duty.
This setup if regionally competitive with a decent drive and good tires! I consistently have been finishing in the top 10 in 60 driver events in PAX. I've won a few STX classes as well.
Pic time!
[IMG]http://i39.photobucket.com/albums/e197/Pzary3233/DSC_0130.jpg[/IMG]
[img]http://i39.photobucket.com/albums/e197/Pzary3233/Auto%20X%20May%2019th/DSC_0224.jpg[/img]
^waiting for action
[img]http://i39.photobucket.com/albums/e197/Pzary3233/WRX/DSC_0146.jpg[/img]
Dumped
Paired with my suspension bushings which can be bought here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1550397[/url]
And 22mm swaybars all around or even a 24mm front bar, you would have an AWESOME setup with some sticky tires!
The suspension is currently on the car and once a buyer is found I will take it off of the car. I would rather keep it all together unless someone can work out something so that everything is sold.[/quote]
| Crash477 | 07-14-2008 09:36 AM |
Ok, so I am joining the Army OCS in a few months and wont have a need for this car, or the time to race it anymore :( definitely a sad moment. I am *thinking* of selling it.
The car is a 2006 Crystal Grey Metallic Subaru Impreza WRX STi that has been prepared to the SCCA STU rules, and is VERY competitive Nationally. It has 36500 miles which most are highway miles from traveling the country.
[U]
Some of the Championships and successes of the car:[/U]
2008 Atlanta Pro-Solo Champion - STU
2008 Dixie National Tour Champion - STU
2007 Southeast Divisional Champion - STU
2007 Huntsville National Tour Champion - STU
2007 Dixie National Tour Champion - STU
2007 Highlands Sports Car Club - Day Series Champion - STU
2007 Highlands Sports Car Club - Night Series Champion - STU
2007 Central Carolina Region Champion - STU
2008 Many Solo FTD's
2007 Solo National Championships STU - 9th & 16th and 2nd in STUL
2007 SCCA Pro-Solo Double-X - 2nd Round Hawk Challenge
2007 2 Solo FTD's and 3 Solo FTP's
The modifications currently on the car (worth over $6000):
[U]
Power Modifications[/U]
BPM 3" Turbo Back Exhaust
BPM Metallic Substrate Hi-flow Catalytic Converter
COBB Accessport v2 Engine Management
Boxer4Racing Pro-Tune by Dale Teague
[U]
Suspension and Drivetrain Modifications[/U]
KWv3 Coilovers 12kg / 10kg Springs
Cusco Front Camber Plates
Cusco Rear Camber Plates
Whiteline 27mm Front Sway Bar
Whiteline 27mm Rear Sway Bar
Whiteline Heavy Duty Rear Sway Bar Mounts
Whiteline Rear Alloy Endlinks
SuperPro Rear Differential Bushings
Group-N Engine Mounts
Group-N Transmission Mount
KartBoy Short Shifter
Motul 300v Fluids
[U]Brake Modifications[/U]
Russell Speed Bleeders
STi Stainless Steel Lines
HAWK HP Plus Front Pads
HAWP HP Plus Rear Pads
Motul Brake Fluid
Bridgestone Potenza RE-01R's 245/40/17 (shaved)
Bridgestone Potenza RE-01R's 245/45/17
The car makes 322 whp and 316 lb/ft wtq on the COBB OTS Stage 2 map. This was on a Mustang Dyno at Taylors in Charlotte, NC.
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Picture031.jpg[/IMG]
The car is an absolute blast to drive, and the best handling autox car I've driven! So planted, and great power throughout the band. I love this car so much!
I have all the stock parts, which will come with the car. The car will also come with 7kg and 8kg springs for the KWv3 coilovers.
The car has been very well taken care of. I have only used Motul synthetic engine oil, and recently switched to the 15w50 300v competition oil. The 30k service was done at 27k miles. The tranny and rear differential fluids were replaced with Subaru recommend fluids, and changed by Pacobeagle on here.
The bad: Compression on cylinder #4 is 80psi, which is 50psi lower than the rest of the cylinders. I believe it is a cracked ring on the piston, and the block is more than likely scored. So it will definitely need new pistons, and more than likely a new short block all together.
There are some cone marks, which is only natural for an autox car. lol but those will clean up with a good waxing. There is also a scuff mark on the left rear quarter panel where some asshat bumped it while they were backing out of a parking space. But if I don't point it out, people don't recognize it. Its very small.
Overall the car is in great shape, aside from needing a new short block possibly. Great handling car, absolute blast to drive!
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Double-X08-02.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Double-X08.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2007%20Solo%20National%20Championships/IMG_0270.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2007%20Solo%20National%20Championships/IMG_1722.jpg[/IMG]
I have already priced how much it will cost to rebuild the engine, which is about $3500. The car has over $6000 in modifications, that will come installed and proven to be competitive on the car. It also comes with all stock parts, and a few extras.
I am asking [COLOR="Red"]$26,000 OBO[/COLOR]
Feel free to ask any questions about the car.
Steven Kornhaus
The car is a 2006 Crystal Grey Metallic Subaru Impreza WRX STi that has been prepared to the SCCA STU rules, and is VERY competitive Nationally. It has 36500 miles which most are highway miles from traveling the country.
[U]
Some of the Championships and successes of the car:[/U]
2008 Atlanta Pro-Solo Champion - STU
2008 Dixie National Tour Champion - STU
2007 Southeast Divisional Champion - STU
2007 Huntsville National Tour Champion - STU
2007 Dixie National Tour Champion - STU
2007 Highlands Sports Car Club - Day Series Champion - STU
2007 Highlands Sports Car Club - Night Series Champion - STU
2007 Central Carolina Region Champion - STU
2008 Many Solo FTD's
2007 Solo National Championships STU - 9th & 16th and 2nd in STUL
2007 SCCA Pro-Solo Double-X - 2nd Round Hawk Challenge
2007 2 Solo FTD's and 3 Solo FTP's
The modifications currently on the car (worth over $6000):
[U]
Power Modifications[/U]
BPM 3" Turbo Back Exhaust
BPM Metallic Substrate Hi-flow Catalytic Converter
COBB Accessport v2 Engine Management
Boxer4Racing Pro-Tune by Dale Teague
[U]
Suspension and Drivetrain Modifications[/U]
KWv3 Coilovers 12kg / 10kg Springs
Cusco Front Camber Plates
Cusco Rear Camber Plates
Whiteline 27mm Front Sway Bar
Whiteline 27mm Rear Sway Bar
Whiteline Heavy Duty Rear Sway Bar Mounts
Whiteline Rear Alloy Endlinks
SuperPro Rear Differential Bushings
Group-N Engine Mounts
Group-N Transmission Mount
KartBoy Short Shifter
Motul 300v Fluids
[U]Brake Modifications[/U]
Russell Speed Bleeders
STi Stainless Steel Lines
HAWK HP Plus Front Pads
HAWP HP Plus Rear Pads
Motul Brake Fluid
Bridgestone Potenza RE-01R's 245/40/17 (shaved)
Bridgestone Potenza RE-01R's 245/45/17
The car makes 322 whp and 316 lb/ft wtq on the COBB OTS Stage 2 map. This was on a Mustang Dyno at Taylors in Charlotte, NC.
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Picture031.jpg[/IMG]
The car is an absolute blast to drive, and the best handling autox car I've driven! So planted, and great power throughout the band. I love this car so much!
I have all the stock parts, which will come with the car. The car will also come with 7kg and 8kg springs for the KWv3 coilovers.
The car has been very well taken care of. I have only used Motul synthetic engine oil, and recently switched to the 15w50 300v competition oil. The 30k service was done at 27k miles. The tranny and rear differential fluids were replaced with Subaru recommend fluids, and changed by Pacobeagle on here.
The bad: Compression on cylinder #4 is 80psi, which is 50psi lower than the rest of the cylinders. I believe it is a cracked ring on the piston, and the block is more than likely scored. So it will definitely need new pistons, and more than likely a new short block all together.
There are some cone marks, which is only natural for an autox car. lol but those will clean up with a good waxing. There is also a scuff mark on the left rear quarter panel where some asshat bumped it while they were backing out of a parking space. But if I don't point it out, people don't recognize it. Its very small.
Overall the car is in great shape, aside from needing a new short block possibly. Great handling car, absolute blast to drive!
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Double-X08-02.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2008%20Racing%20Pictures/Double-X08.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2007%20Solo%20National%20Championships/IMG_0270.jpg[/IMG]
[IMG]http://i58.photobucket.com/albums/g259/Crash477/2007%20Solo%20National%20Championships/IMG_1722.jpg[/IMG]
I have already priced how much it will cost to rebuild the engine, which is about $3500. The car has over $6000 in modifications, that will come installed and proven to be competitive on the car. It also comes with all stock parts, and a few extras.
I am asking [COLOR="Red"]$26,000 OBO[/COLOR]
Feel free to ask any questions about the car.
Steven Kornhaus
| Pacobeagle | 07-15-2008 07:22 AM |
CCW's still up for grabs...make an offer
| pzary3233 | 07-15-2008 11:55 AM |
[QUOTE=pzary3233;22874028]I have the following polyurethane suspension bushings for sale. Prices are what I paid for them (I never installed them), and the are rather firm. The bushings were used in an Auto X car that was not street driven and have very few miles.
* Trailing arms with the front bushing $80
* rear trailing arm bushing $40
* Front control arm Front Bushings $30
* Whiteline Front Control Arm Offset Bushing (KCA375) $80
* This is an STX LEGAL ALK!
These parts are small so shipping isn't bad at all.
[url]http://forums.nasioc.com/forums/showthread.php?p=22874011#post22874011[/url]
PM me or post with any questions![/QUOTE]
Still up for grabs!
* Trailing arms with the front bushing $80
* rear trailing arm bushing $40
* Front control arm Front Bushings $30
* Whiteline Front Control Arm Offset Bushing (KCA375) $80
* This is an STX LEGAL ALK!
These parts are small so shipping isn't bad at all.
[url]http://forums.nasioc.com/forums/showthread.php?p=22874011#post22874011[/url]
PM me or post with any questions![/QUOTE]
Still up for grabs!
| Patrick Olsen | 07-15-2008 12:32 PM |
[QUOTE=Patrick Olsen;22840915]I'm cleaning out the garage of old stuff that I don't need anymore. I'm on my 4th spring combination with Koni/GC setup, and I don't need all the old springs that I've used in the past. So, they're up for grabs.
All springs are Eibach ERS, and all are 2.5" diameter.
2 10" long, 200#
2 10" long, 225#
2 10" long, 325# - [COLOR="Red"]SOLD[/COLOR]
2 9" long, 290#
I don't know what the going rate is for used coil-over springs, so I'll say $40 a pair. I think that's about 1/3 what new ones cost, so that seems reasonable. If it's not, let me know. Buyer pays actual shipping cost from 98383.
Pat Olsen[/QUOTE]
Still available. I don't check this thread too often, so please PM me if you're interested.
Price is now $40 SHIPPED per pair.
Pat
All springs are Eibach ERS, and all are 2.5" diameter.
2 10" long, 200#
2 10" long, 225#
2 10" long, 325# - [COLOR="Red"]SOLD[/COLOR]
2 9" long, 290#
I don't know what the going rate is for used coil-over springs, so I'll say $40 a pair. I think that's about 1/3 what new ones cost, so that seems reasonable. If it's not, let me know. Buyer pays actual shipping cost from 98383.
Pat Olsen[/QUOTE]
Still available. I don't check this thread too often, so please PM me if you're interested.
Price is now $40 SHIPPED per pair.
Pat
| pzary3233 | 07-15-2008 04:12 PM |
Man, if my suspension doesn't sell soon I'll be interested in the 200 and 225 springs!
| nhat | 07-16-2008 10:14 AM |
[quote=pzary3233;22990735]Man, if my suspension doesn't sell soon I'll be interested in the 200 and 225 springs![/quote]
your suspension would be mine if i had $1200 laying around :(
your suspension would be mine if i had $1200 laying around :(
| sspicollo8 | 07-17-2008 12:48 AM |
[QUOTE=Pacobeagle;22689691]Still sitting in my garage.......hopefully in yours soon.
Let me know or call me at 561-628-2765.
Jose[/QUOTE]
What is the offset on your CCWs and how much are you looking to get for them? Any pictures of the finish/condition? 5x114 bolt pattern?
Edit: Meant for this to be a PM... my bad.
Let me know or call me at 561-628-2765.
Jose[/QUOTE]
What is the offset on your CCWs and how much are you looking to get for them? Any pictures of the finish/condition? 5x114 bolt pattern?
Edit: Meant for this to be a PM... my bad.
| nhat | 07-17-2008 10:19 AM |
[quote=sspicollo8;23010821]What is the offset on your CCWs and how much are you looking to get for them? Any pictures of the finish/condition? 5x114 bolt pattern?
Edit: Meant for this to be a PM... my bad.[/quote]
[quote=Pacobeagle;18902361]Possibly considring the sale of my 17X10 CCW Classics......Currently they are running a set of 295/35R17 Hoosier A6's.
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose[/quote]
sorry i can't answer the offset question.
Edit: Meant for this to be a PM... my bad.[/quote]
[quote=Pacobeagle;18902361]Possibly considring the sale of my 17X10 CCW Classics......Currently they are running a set of 295/35R17 Hoosier A6's.
These wheels are double drilled so WRX's and Sti's are welcome. Please PM me with offers.
Jose[/quote]
sorry i can't answer the offset question.
| STEALTH-WRX | 07-22-2008 12:56 AM |
17x8 Enkei RPF1 Gold Wheels with Hoosier Tires
�
�
***sold***
| pzary3233 | 07-22-2008 01:57 AM |
Someone should buy those wheels and tires with my suspension and have a fun track day car!!!!
| mav1c | 07-22-2008 06:49 AM |
This is a friggin good deal. Won't fit my car, but a good deal. :)
[QUOTE=STEALTH-WRX;23062852]Enkei RPF1 Gold Wheels
5x100 17" x 8"
Wheels have about 15 miles on them. Used very little. Wheels come with Hoosier Road racing tires on them.
2 of the wheels have R6 Hoosiers, and 2 have R3S04's.
Both tires have less than 20 minutes on them.
$1100.00 OBO
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0399.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0400.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0401.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0405.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0406.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0408.jpg[/IMG][/QUOTE]
[QUOTE=STEALTH-WRX;23062852]Enkei RPF1 Gold Wheels
5x100 17" x 8"
Wheels have about 15 miles on them. Used very little. Wheels come with Hoosier Road racing tires on them.
2 of the wheels have R6 Hoosiers, and 2 have R3S04's.
Both tires have less than 20 minutes on them.
$1100.00 OBO
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0399.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0400.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0401.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0405.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0406.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm240/NickolausD/IMG_0408.jpg[/IMG][/QUOTE]
| bamfwrx | 07-23-2008 10:04 PM |
Good Deal
�
�
THATS A GREAT DEAL butt i'm scared to ask what shipping would be to 29172
| pzary3233 | 07-24-2008 01:23 AM |
I shipped wheels only from Memphis to Colorado at 12 bucks a wheel from FedEx So I would imagine it shouldn't be tooo much.
| BIGSKYWRX | 07-24-2008 09:37 AM |
wheel/tire combo shipping (including insurance) is roughly $35/ wheel/tire
| DILLIGAF Racing | 07-24-2008 02:10 PM |
I have a Hotchkis 25.4 Front sway bar off of a 2002 WRX wagon....best offer
| STEALTH-WRX | 07-24-2008 04:22 PM |
[QUOTE=bamfwrx;23087609]THATS A GREAT DEAL butt i'm scared to ask what shipping would be to 29172[/QUOTE]
The wheels and tires shipped is $100 to your location.
The wheels and tires shipped is $100 to your location.
| FASTRPH | 07-25-2008 12:31 AM |
Got 2 sets of Kumho V710s I need to get rid of:
A used set of 245/35/18s with approximately 26 runs on them: $600 for all 4 tires (over $1200 new)
A new set of 285/30/18s: $1100 for all 4 (I paid about $1300 with shipping; my loss is your gain)
The reason I'm selling the 285s new is I could not find a shop in STL (tried 4 different shops!!) that could mount them onto my wheels and get the beads to pop.
PM me if you are interested in them. I'm also offering free shipping to anywhere in the lower 48 states.
A used set of 245/35/18s with approximately 26 runs on them: $600 for all 4 tires (over $1200 new)
A new set of 285/30/18s: $1100 for all 4 (I paid about $1300 with shipping; my loss is your gain)
The reason I'm selling the 285s new is I could not find a shop in STL (tried 4 different shops!!) that could mount them onto my wheels and get the beads to pop.
PM me if you are interested in them. I'm also offering free shipping to anywhere in the lower 48 states.
| omaha03wrx | 07-27-2008 07:48 PM |
Coilovers SOLD.
-MRT Adjustable Rear Latteral Links. $300
-Whiteline 27/29mm front sway bar for 03 or like WRX Sedan. Used for less than 800 miles. $180
-MRT Adjustable Rear Latteral Links. $300
-Whiteline 27/29mm front sway bar for 03 or like WRX Sedan. Used for less than 800 miles. $180
| CTKAG | 07-27-2008 09:17 PM |
[QUOTE=omaha03wrx;23127868]-
4 Noltec Front and Rear Race Camber/Caster Plates. The fronts have been moded to allow for more caster.
[/QUOTE]
If you'd be interested in selling just the camber plates, I'd be interested. My Noltec street plates are shot.
-Keith-
4 Noltec Front and Rear Race Camber/Caster Plates. The fronts have been moded to allow for more caster.
[/QUOTE]
If you'd be interested in selling just the camber plates, I'd be interested. My Noltec street plates are shot.
-Keith-
| omaha03wrx | 07-28-2008 06:45 AM |
[QUOTE=CTKAG;23128613]If you'd be interested in selling just the camber plates, I'd be interested. My Noltec street plates are shot.
-Keith-[/QUOTE]
Honestly I would just like to sell everything together.
-Keith-[/QUOTE]
Honestly I would just like to sell everything together.
| crystalhelix | 07-28-2008 08:03 PM |
Two 18X10.5 Enkei RPF-1 +25 offset 5X114.3 bolt pattern
Worked fine on the front of my BSP car...asking $450 plus shipping for the pair
PM me if interested.
[IMG]http://www.autoxphotos.com/thumb.asp?size=640&path=gallery/Steel Cities SCCA/2008/2008-04-27/Bob K/20082008-04-27_13-30-12ax1ss.JPG[/IMG]
Worked fine on the front of my BSP car...asking $450 plus shipping for the pair
PM me if interested.
[IMG]http://www.autoxphotos.com/thumb.asp?size=640&path=gallery/Steel Cities SCCA/2008/2008-04-27/Bob K/20082008-04-27_13-30-12ax1ss.JPG[/IMG]
| xcdhridr | 07-29-2008 07:01 PM |
245/40/17 Yoko Advan Neova's. About 4-5 32nds. Good for another season or so. 3 have even wear, one has shoulder wear from alingment.
$380 + shipping.
$380 + shipping.
| akuhner | 08-03-2008 02:32 PM |
[URL="http://forums.nasioc.com/forums/showthread.php?t=1569253"] FS: Rally Stuff! Sparco EVO L, JDM Bumper Beam, Pletor G90 Helmet, Tein HGs, etc![/URL]
| Mauricio | 08-04-2008 11:40 AM |
Kodiak racing wheels:
[url]http://forums.nasioc.com/forums/showthread.php?t=1465820[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1465820[/url]
| bdi | 08-07-2008 08:29 AM |
FS: BNIB MaxQData MQGPS-5Hz with ASUS PDA
�
�
I have a brand new 5Hz MaxQ system for sale. Its never been used. It comes with everything you need...MQGPS-5Hz, ASUS PDA, Instruction manual and all wires to charge and connect to your computer. Also all software is preloaded onto the PDA. This is the exact kit from MaxQ that goes for $489 before shipping. Check the link for more information: [url]http://www.maxqdata.com/MQGPS.htm[/url]
Shoot me (PM me) some offers. I am willing to ship.
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5784.jpg[/IMG]
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5789.jpg[/IMG]
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5790.jpg[/IMG]
Shoot me (PM me) some offers. I am willing to ship.
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5784.jpg[/IMG]
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5789.jpg[/IMG]
[IMG]http://i140.photobucket.com/albums/r27/imancapers/IMG_5790.jpg[/IMG]
| Nate8409 | 08-08-2008 09:57 PM |
Bilstein PSS9 Coilover kit for 04 STI and WRX's pre hatchback. $1250
F4-GM5-A128-H0
Currently have DMS tops on them that you can buy with or without the coils.
400 for the rear set or 400 for the front set. Will give you a deal if you buy the coils and the tops at the same time.
All parts have about 3000 miles on them.
F4-GM5-A128-H0
Currently have DMS tops on them that you can buy with or without the coils.
400 for the rear set or 400 for the front set. Will give you a deal if you buy the coils and the tops at the same time.
All parts have about 3000 miles on them.
| aceking66 | 08-10-2008 10:17 PM |
maxQ data hi-def 10hz
�
�
hi guys i am selling my data logger(cause i am selling my car and wont need it for awhile) is the Maxqdata mqgps HI-DEF i been using maxQ stuff for about a year & half they are awesome i have learn alot from it and ed is awesome with customer services, works great for AutoXing and any motorsport events, just got their high def 10hz system back in march and used it less than 10 times is in EXCELLENT shape still have the box and everything that came with asking $350 shipped does not come with PDA.
here is the website for maxQ's stuff for people who needs more info.
[url]http://www.maxqdata.com/[/url]
here is the website for maxQ's stuff for people who needs more info.
[url]http://www.maxqdata.com/[/url]
| DELTA_Rotary | 08-11-2008 06:24 PM |
[QUOTE=CTKAG;23128613]If you'd be interested in selling just the camber plates, I'd be interested. My Noltec street plates are shot.
-Keith-[/QUOTE]
I have a brand new set of Noltecs for sale still in the box if your interested.
[url]http://forums.nasioc.com/forums/showthread.php?p=23293708&posted=1#post23293708[/url]
-Keith-[/QUOTE]
I have a brand new set of Noltecs for sale still in the box if your interested.
[url]http://forums.nasioc.com/forums/showthread.php?p=23293708&posted=1#post23293708[/url]
Không có nhận xét nào:
Đăng nhận xét