| brandonl | 10-22-2008 08:03 PM |
Hypercoil springs for sale
�
�
Part# 8M03508" free length, 60mm ID, 350lb rate. These came with my RCE tarmac 2's. About 4,000 miles of use. Asking $50obo for the pair.
[IMG]http://i70.photobucket.com/albums/i110/jerseybrandon/stuff%20for%20sale/spring.jpg[/IMG]
[IMG]http://i70.photobucket.com/albums/i110/jerseybrandon/stuff%20for%20sale/spring.jpg[/IMG]
| 04_wrx_platinum | 11-06-2008 07:07 PM |
After 5 seasons, I've decided to sell my autox toy. Just wondering if anyone is interested in the car as it sits before I start parting it out and trade it in. Currently it is prepped for STX class (SCCA Classing).
I'm asking 16k for everything I have for the car.
I have most stock items as well.
-70,000 miles on the car (mostly highway in the first 3 years of owning the car)
-not daily driven since 2005
-oil changed frequently (monthly during Autox Season)
-trans & diff fluids changed yearly
-Title in hand
-one owner, I purchased it new in May of 2003
Suspension/Driveline
RCE Tarmac 2 Coilovers (400/500)
PDE Front Camber Plates
Cucso Rear Camber Plates
Whiteline Caster Bushings
27-29mm Whiteline front swaybar
22mm Perrin rear sway bar
Perrin Rear Endlinks
Stock front endlinks
Whiteline front endlinks (new in package)
Group N Engine Mounts
Transmission
Pitch Stop
Laterlink Bushings
Trailing Link Bushings
TiC Subaru Rear Diff Mount Bushings
Kartboy Tranny Crossmember Bushings
Kartboy Rear Shifter Stay Bushing
Kartboy Shifter Bushings
Whiteline Steering Rack Bushings
Brakes
Carbotech Bobcat Brake Pads/Rotors
H6 Rear Rotors Upgrade
Stainless Brake Lines
Wheels
Enkei RPF1 (17x8, 235/40/17 Dunlop Star Specs (5-6/32nds remaining or Yokohama Neovas(Brand new)
Powder Coated STI BBS (17x7.5 225/45/17 Bridgestone RE070's)
Motor
Perrin Turbo Inlet
Maxim Works Equal Length Header
Random Technology downpipe w/2 hi-flo cats (no cel's)
Custom 1 piece exhaust with Borla Race muffler
Perrin Crank Pulley
Cobb intake
Perrin Afta-Maf Tube
Odessey Battery
Accessport V1 protoned by Jorge @ P&L
Interior
Sparco Pro2000 Drivers seat with Bride seat rails
also have a passenger seat rail
Sabelt 4-point Harness
[IMG]http://i166.photobucket.com/albums/u100/vanders78/WRX/DSC_0072.jpg[/img]
[IMG]http://i166.photobucket.com/albums/u100/vanders78/WRX/DSC_0493.jpg[/img]
I'm asking 16k for everything I have for the car.
I have most stock items as well.
-70,000 miles on the car (mostly highway in the first 3 years of owning the car)
-not daily driven since 2005
-oil changed frequently (monthly during Autox Season)
-trans & diff fluids changed yearly
-Title in hand
-one owner, I purchased it new in May of 2003
Suspension/Driveline
RCE Tarmac 2 Coilovers (400/500)
PDE Front Camber Plates
Cucso Rear Camber Plates
Whiteline Caster Bushings
27-29mm Whiteline front swaybar
22mm Perrin rear sway bar
Perrin Rear Endlinks
Stock front endlinks
Whiteline front endlinks (new in package)
Group N Engine Mounts
Transmission
Pitch Stop
Laterlink Bushings
Trailing Link Bushings
TiC Subaru Rear Diff Mount Bushings
Kartboy Tranny Crossmember Bushings
Kartboy Rear Shifter Stay Bushing
Kartboy Shifter Bushings
Whiteline Steering Rack Bushings
Brakes
Carbotech Bobcat Brake Pads/Rotors
H6 Rear Rotors Upgrade
Stainless Brake Lines
Wheels
Enkei RPF1 (17x8, 235/40/17 Dunlop Star Specs (5-6/32nds remaining or Yokohama Neovas(Brand new)
Powder Coated STI BBS (17x7.5 225/45/17 Bridgestone RE070's)
Motor
Perrin Turbo Inlet
Maxim Works Equal Length Header
Random Technology downpipe w/2 hi-flo cats (no cel's)
Custom 1 piece exhaust with Borla Race muffler
Perrin Crank Pulley
Cobb intake
Perrin Afta-Maf Tube
Odessey Battery
Accessport V1 protoned by Jorge @ P&L
Interior
Sparco Pro2000 Drivers seat with Bride seat rails
also have a passenger seat rail
Sabelt 4-point Harness
[IMG]http://i166.photobucket.com/albums/u100/vanders78/WRX/DSC_0072.jpg[/img]
[IMG]http://i166.photobucket.com/albums/u100/vanders78/WRX/DSC_0493.jpg[/img]
| mav1c | 11-07-2008 08:30 AM |
[b]Flat Black Rota Slipstreams 17x8.5 +48 5x114.3 73mm HB[/b] Used as track wheels. No scrapes or dings. $425
I should have cleaned them first:
[IMG]http://i215.photobucket.com/albums/cc241/liquidsti/Car_Pics/Slipstreams_2.jpg[/IMG]
I should have cleaned them first:
[IMG]http://i215.photobucket.com/albums/cc241/liquidsti/Car_Pics/Slipstreams_2.jpg[/IMG]
| Homemade WRX | 11-07-2008 09:29 AM |
^^^ you never answered my question in MAIC classifieds...I'm a "local" who is very interested :lol:
what's the weight on them though?
I'll be in Fairfax next weekend too, so I'll be driving right past Woodbridge.
what's the weight on them though?
I'll be in Fairfax next weekend too, so I'll be driving right past Woodbridge.
| mav1c | 11-07-2008 10:15 AM |
[QUOTE=Homemade WRX;24376199]^^^ you never answered my question in MAIC classifieds...I'm a "local" who is very interested :lol:
what's the weight on them though?
I'll be in Fairfax next weekend too, so I'll be driving right past Woodbridge.[/QUOTE]
Really? Sorry. I must have totally missed it. Weight's 21 lbs.
what's the weight on them though?
I'll be in Fairfax next weekend too, so I'll be driving right past Woodbridge.[/QUOTE]
Really? Sorry. I must have totally missed it. Weight's 21 lbs.
| Pacobeagle | 11-13-2008 09:42 AM |
My 2002 WRX PSM sedan, $9000!!!!!!
[url]http://forums.nasioc.com/forums/showthread.php?t=1616170[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1616170[/url]
| gregr01 | 11-14-2008 01:23 PM |
WTB: Cusco 8/6 spring set
�
�
I'm looking to buy a set of Cusco 8/6 springs For Zero-2R (from an '04 with 7/5).
If you have these coilovers from '05-'07 they most likely came with 'em.
Can anyone verify for me 60mm diameter?
How about freelength?
thanks!
If you have these coilovers from '05-'07 they most likely came with 'em.
Can anyone verify for me 60mm diameter?
How about freelength?
thanks!
| digitalseance | 11-14-2008 02:10 PM |
^^ I have an extra set of cusco coils, I think they're at my parents house (out of state). I'll call them tonight and verify length etc.
| Scooby South | 11-15-2008 10:41 AM |
[QUOTE=gregr01;24468361]I'm looking to buy a set of Cusco 8/6 springs For Zero-2R (from an '04 with 7/5).
If you have these coilovers from '05-'07 they most likely came with 'em.
Can anyone verify for me 60mm diameter?
How about freelength?
thanks![/QUOTE]
You do realize that Eibach or Hypercoils will work for you application don't You???..2.5 diameter and length is up to you.....most prefer 7 in length some 6 in....and some 8 in...
Bill
If you have these coilovers from '05-'07 they most likely came with 'em.
Can anyone verify for me 60mm diameter?
How about freelength?
thanks![/QUOTE]
You do realize that Eibach or Hypercoils will work for you application don't You???..2.5 diameter and length is up to you.....most prefer 7 in length some 6 in....and some 8 in...
Bill
| Scooby South | 11-15-2008 10:57 AM |
For Sale...Freshly Rebuilt set of LEDA Option C's (Yes the good ones with a remote Reservoirs for GC or GD...Have GC JIC Camber plates or Cusco GD Plates for the front...and Solid GC upper mounts for the rear...Comes with 8 set of springs from 225lb up to 500 lb spring rates...totally adjustable Bump AND Rebound. have about 500 miles on them since the rebuild...Make offer...But just an Idea....looking for around $1600 or so..
[IMG]http://www.scoobysouth.com/leda.jpg[/IMG]
[IMG]http://www.scoobysouth.com/LedaC.jpg[/IMG]
[IMG]http://www.scoobysouth.com/leda.jpg[/IMG]
[IMG]http://www.scoobysouth.com/LedaC.jpg[/IMG]
| gregr01 | 11-15-2008 03:23 PM |
Well, per Cusco specs I'm very hesitant to use 2.5" ID spings.
Zero 2R spring specs:
Inner Diameter: 73mm (~2.875")
Height of Spring: 200mm (~8" rounded to closest inch)
Rear Springs
Inner Diameter: 65mm (~2.5")
Height of Spring: 250mm (~10" rounded to closest inch)
They also have an atypical thin/flat bottom on the rears. Anybody [I]actually[/I] used Eibach or Hypercoils with Cusco Zero 2R coilovers?
[QUOTE=Scooby South;24478364]You do realize that Eibach or Hypercoils will work for you application don't You???..2.5 diameter and length is up to you.....most prefer 7 in length some 6 in....and some 8 in...
Bill[/QUOTE]
Zero 2R spring specs:
Inner Diameter: 73mm (~2.875")
Height of Spring: 200mm (~8" rounded to closest inch)
Rear Springs
Inner Diameter: 65mm (~2.5")
Height of Spring: 250mm (~10" rounded to closest inch)
They also have an atypical thin/flat bottom on the rears. Anybody [I]actually[/I] used Eibach or Hypercoils with Cusco Zero 2R coilovers?
[QUOTE=Scooby South;24478364]You do realize that Eibach or Hypercoils will work for you application don't You???..2.5 diameter and length is up to you.....most prefer 7 in length some 6 in....and some 8 in...
Bill[/QUOTE]
| dunk | 11-17-2008 12:07 PM |
Set of Front Knuckles for WRX/04STI
-Have two track days on the left, new bearing in the right (no street time at all)
-Bearings have been repacked with redline hi-temp grease
-Have ARP 3" studs already pressed in.
Also have a set of rears with factory studs
Asking 225 dollars for the fronts.
150 dollars for the rears.
300 for both.
Duncan
-Have two track days on the left, new bearing in the right (no street time at all)
-Bearings have been repacked with redline hi-temp grease
-Have ARP 3" studs already pressed in.
Also have a set of rears with factory studs
Asking 225 dollars for the fronts.
150 dollars for the rears.
300 for both.
Duncan
| Leonardo | 11-17-2008 01:45 PM |
Well, I got a harness and it's black and yellow letters but it's the right side (Passenger) so I have no use for it as I need the Left side. Got it from someone that had it in a box but didn't check it so the box says left and it's beat up but the harness is new and unused.
Again, this is the PASSENGER side and DOT approved.
I'll try to snap a pic of it later but I'm throwing it out there now at $100. Shipped. Paypal is extra.
Still a bargain as new ones are above the $140.+
Thanks!
Again, this is the PASSENGER side and DOT approved.
I'll try to snap a pic of it later but I'm throwing it out there now at $100. Shipped. Paypal is extra.
Still a bargain as new ones are above the $140.+
Thanks!
| S1MPSONS | 11-17-2008 07:21 PM |
FS: NYC: Enkei RPF-1 Wheels (17x8 5x100 15lbs) w/ Bridgestone Potenza RE01R Tires
�
�
Sold..............
| Okinawa-Pimp | 11-18-2008 04:27 PM |
Freshly powdercoated 18x8 5x100 ET 53 Rota Tarmac
�
�
Freshly powdercoated 18x8 5x100 ET 53 Rota Tarmac II
Tires are Khumo Ecsta AST 225/40/18 She's done less than 500 miles on them
Paid
$500 for Rotas
$500 for tires
$250 for stripping old paint
$200 for powdercoating (deal thru a friend, normally $90 per wheel)
ASKING $1000
I got these for my wife about 2 months ago.
She drove on them for about 1 month.
Last month I switched to snow tires (I'm in Chicago) and she is already asking if it would be a big deal to get then done for her in PINK
This was A LOT of work and money.
This finish is so durable I dont want to strip them again. I'd rather buy another set (painted) and do them instead of trying to remove this finish
I really wanna surprise her in the spring but I have to sell these first
Thanks
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2575.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2574.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2573.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2586.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2585.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2584.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2583.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2578.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2577.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2576.jpg[/IMG]
Tires are Khumo Ecsta AST 225/40/18 She's done less than 500 miles on them
Paid
$500 for Rotas
$500 for tires
$250 for stripping old paint
$200 for powdercoating (deal thru a friend, normally $90 per wheel)
ASKING $1000
I got these for my wife about 2 months ago.
She drove on them for about 1 month.
Last month I switched to snow tires (I'm in Chicago) and she is already asking if it would be a big deal to get then done for her in PINK
This was A LOT of work and money.
This finish is so durable I dont want to strip them again. I'd rather buy another set (painted) and do them instead of trying to remove this finish
I really wanna surprise her in the spring but I have to sell these first
Thanks
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2575.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2574.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2573.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2586.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2585.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2584.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2583.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2578.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2577.jpg[/IMG]
[IMG]http://i297.photobucket.com/albums/mm220/paciadro/wheels4sale/IMG_2576.jpg[/IMG]
| CGM6 | 11-19-2008 09:12 PM |
^ wish I had the $$... :(
| kcook | 11-19-2008 11:05 PM |
those are tarmac II
| triple_s1x | 11-22-2008 08:10 PM |
I got a pair of Recaro Pole Positions available.. $700 for the pair + shipping.
| pzary3233 | 11-22-2008 10:12 PM |
^ oooh, pics?!?!?
| triple_s1x | 11-23-2008 01:16 PM |
Here is one [IMG]http://i39.photobucket.com/albums/e168/mhryckie/IMG_2689.jpg[/IMG]
Here is the other.[IMG]http://i39.photobucket.com/albums/e168/mhryckie/IMG_2697.jpg[/IMG]
Here is the other.[IMG]http://i39.photobucket.com/albums/e168/mhryckie/IMG_2697.jpg[/IMG]
| Greg555 | 11-23-2008 01:43 PM |
| JoBoo | 11-23-2008 04:04 PM |
[QUOTE=gregr01;24480275]Well, per Cusco specs I'm very hesitant to use 2.5" ID spings.
Zero 2R spring specs:
Inner Diameter: 73mm (~2.875")
Height of Spring: 200mm (~8" rounded to closest inch)
Rear Springs
Inner Diameter: 65mm (~2.5")
Height of Spring: 250mm (~10" rounded to closest inch)
They also have an atypical thin/flat bottom on the rears. Anybody [I]actually[/I] used Eibach or Hypercoils with Cusco Zero 2R coilovers?[/QUOTE]
Im using Eibach's on mine. It is true the ID is a wee bit smaller than the OEs. On the rear I just flipped the lower spring collar over, the top was fine as its just against the top plate. The fronts I had to mod the top collar to remove some material to fully seat the ID. The lower end I flipped the collar. Has worked fine for the last couple years. Hope that helps.
Zero 2R spring specs:
Inner Diameter: 73mm (~2.875")
Height of Spring: 200mm (~8" rounded to closest inch)
Rear Springs
Inner Diameter: 65mm (~2.5")
Height of Spring: 250mm (~10" rounded to closest inch)
They also have an atypical thin/flat bottom on the rears. Anybody [I]actually[/I] used Eibach or Hypercoils with Cusco Zero 2R coilovers?[/QUOTE]
Im using Eibach's on mine. It is true the ID is a wee bit smaller than the OEs. On the rear I just flipped the lower spring collar over, the top was fine as its just against the top plate. The fronts I had to mod the top collar to remove some material to fully seat the ID. The lower end I flipped the collar. Has worked fine for the last couple years. Hope that helps.
| AJS | 11-25-2008 10:34 PM |
Still for sale...Open to offers...
[img]http://universalrally.com/resources/_wsb_538x362_suspension._small.jpg[/img]
[QUOTE=AJS;23769141]Prodrive/Bilstein 50mm GN Gravel Dampers for a GC8. Shocks have a built in oil circulating system that continually sprays oil on the upper bearing keeping the shock cool over long stages. Shocks have almost new GN Top mounts. The large diameter springs reduce flexing under load.
Shocks were completely overhauled and have done two rallies (Reno and Idaho). The overall included re-cad plating the shock bodies, replacing all of the bearings, having all of the inserts rebuilt by Bilstein, which is $75 per insert and the turn around time is a week! After Idaho shocks were torn apart, cleaned, greased and reassembled!
There are numerous spares including bearings (enough for a full replacement), various seals, oil lines and a spare insert. They will also come with the original Prodrive parts catalogue, bearing insertion tool and set-up sheets.
This is by far the best suspension I�ve ever rallied on. It�s a non-adjustable set-up that is prefect the way it was designed by Prodrive, no need to mess with anything! This is world class set-up used in the PWRC back in the day.
I�m not in a big hurry to sell it and I�ll only take $3000 for it.
Picture here:
[url]http://www.specialstage.com/classifieds/showproduct.php?product=1069&cat=18[/url]
Andrew[/QUOTE]
[img]http://universalrally.com/resources/_wsb_538x362_suspension._small.jpg[/img]
[QUOTE=AJS;23769141]Prodrive/Bilstein 50mm GN Gravel Dampers for a GC8. Shocks have a built in oil circulating system that continually sprays oil on the upper bearing keeping the shock cool over long stages. Shocks have almost new GN Top mounts. The large diameter springs reduce flexing under load.
Shocks were completely overhauled and have done two rallies (Reno and Idaho). The overall included re-cad plating the shock bodies, replacing all of the bearings, having all of the inserts rebuilt by Bilstein, which is $75 per insert and the turn around time is a week! After Idaho shocks were torn apart, cleaned, greased and reassembled!
There are numerous spares including bearings (enough for a full replacement), various seals, oil lines and a spare insert. They will also come with the original Prodrive parts catalogue, bearing insertion tool and set-up sheets.
This is by far the best suspension I�ve ever rallied on. It�s a non-adjustable set-up that is prefect the way it was designed by Prodrive, no need to mess with anything! This is world class set-up used in the PWRC back in the day.
I�m not in a big hurry to sell it and I�ll only take $3000 for it.
Picture here:
[url]http://www.specialstage.com/classifieds/showproduct.php?product=1069&cat=18[/url]
Andrew[/QUOTE]
| 1racingparts | 12-03-2008 11:06 PM |
we have variety sport items ,is it possible to show here ?
| Scooby South | 12-04-2008 08:30 PM |
[QUOTE=1racingparts;24695926]we have variety sport items ,is it possible to show here ?[/QUOTE]
No...this is Private individual Motorsport For Sale thread...
If you would like to apply for a vendor account Please contact [email][email�protected][/email] to become one...
there is also a rule against putting your website and contact infomation in your replys....that is considered vending...
Thanks
Bill
No...this is Private individual Motorsport For Sale thread...
If you would like to apply for a vendor account Please contact [email][email�protected][/email] to become one...
there is also a rule against putting your website and contact infomation in your replys....that is considered vending...
Thanks
Bill
| xrocket21 | 12-07-2008 10:55 AM |
Date on these is 1998 and 1999 making them NOT leagl for any sanctioned racing. These are perfect for auto-x or show.
The only reason they are not legal is the date. They are in EXCELLENT condition, no nicks/ tears etc, and they match the sti blue perfect.
They are bolt in and comfortable.
[img]http://www.aww-kittah-aww.com/up/files/157/harness1.JPG[/img]
[img]http://www.aww-kittah-aww.com/up/files/157/Harness2.JPG[/img]
I had them mounted to the C-Pillar, you can kinda see here
[img]http://www.aww-kittah-aww.com/up/files/157/autox8.JPG[/img]
[img]http://www.aww-kittah-aww.com/up/files/157/autox7.JPG[/img]
Asking $75 shipped for the pair
The only reason they are not legal is the date. They are in EXCELLENT condition, no nicks/ tears etc, and they match the sti blue perfect.
They are bolt in and comfortable.
[img]http://www.aww-kittah-aww.com/up/files/157/harness1.JPG[/img]
[img]http://www.aww-kittah-aww.com/up/files/157/Harness2.JPG[/img]
I had them mounted to the C-Pillar, you can kinda see here
[img]http://www.aww-kittah-aww.com/up/files/157/autox8.JPG[/img]
[img]http://www.aww-kittah-aww.com/up/files/157/autox7.JPG[/img]
Asking $75 shipped for the pair
| dunk | 12-07-2008 04:28 PM |
One Momo Cup Seat. Side mount, blue. I'll throw in the sliders as well, however you'll need to purchase side mounts and a base.
[img]http://www.ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/26Mar06/slides/IMG_0207.JPG[/img]
225 obo.
thanks,
Duncan
[img]http://www.ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/26Mar06/slides/IMG_0207.JPG[/img]
225 obo.
thanks,
Duncan
| BIGSKYWRX | 12-07-2008 05:10 PM |
trailing links w/ NEW Grp N bushings pre-pressed in- ST*, SP* and SM legal (probably some rally classes too :))- fits all Imprezas 02-07
[url]http://forums.nasioc.com/forums/showthread.php?t=1654042[/url]
[url]http://forums.nasioc.com/forums/showthread.php?t=1654042[/url]
| xcdhridr | 12-08-2008 11:55 AM |
Time to sell some wheels.
17x9 5x100 (and 5x114.3) Sportmax 050 (shiny!) rims (38 offset) with Hankook z214 275/40/17 Tires. These were my "back-up" autocross setup so they only have 30-40 runs on them. Even wear across the tires and were rotated evenly. I would guess that they have an entire season (maybe two) left in them. I'll try to post pics this evening. setup weighs around 47lbs a piece (rims are around 20). I'll try to get a more precise measurement.
$875 plus shipping.
Stored in doors in bags when not in use (I have a dedicated room for tires/wheels).
[IMG]http://www.drewlittle.com/racing/050s.jpg[/IMG]
pics [url]http://s246.photobucket.com/albums/gg115/subadrew99/Sportmax/[/url]
17x9 5x100 (and 5x114.3) Sportmax 050 (shiny!) rims (38 offset) with Hankook z214 275/40/17 Tires. These were my "back-up" autocross setup so they only have 30-40 runs on them. Even wear across the tires and were rotated evenly. I would guess that they have an entire season (maybe two) left in them. I'll try to post pics this evening. setup weighs around 47lbs a piece (rims are around 20). I'll try to get a more precise measurement.
$875 plus shipping.
Stored in doors in bags when not in use (I have a dedicated room for tires/wheels).
[IMG]http://www.drewlittle.com/racing/050s.jpg[/IMG]
pics [url]http://s246.photobucket.com/albums/gg115/subadrew99/Sportmax/[/url]
| Leonardo | 12-08-2008 12:08 PM |
[quote=Leonardo;24498325]Well, I got a harness and it's black and yellow letters but it's the right side (Passenger) so I have no use for it as I need the Left side. Got it from someone that had it in a box but didn't check it so the box says left and it's beat up but the harness is new and unused.
Again, this is the PASSENGER side and DOT approved.
I'll try to snap a pic of it later but I'm throwing it out there now at $100. Shipped. Paypal is extra.
Still a bargain as new ones are above the $140.+
Thanks![/quote]
Bump for sale.
Reasonable offers?
Again, this is the PASSENGER side and DOT approved.
I'll try to snap a pic of it later but I'm throwing it out there now at $100. Shipped. Paypal is extra.
Still a bargain as new ones are above the $140.+
Thanks![/quote]
Bump for sale.
Reasonable offers?
| pzary3233 | 12-09-2008 10:58 AM |
[QUOTE=dunk;24496993]Set of Front Knuckles for WRX/04STI
-Have two track days on the left, new bearing in the right (no street time at all)
-Bearings have been repacked with redline hi-temp grease
-Have ARP 3" studs already pressed in.
Also have a set of rears with factory studs
Asking 225 dollars for the fronts.
150 dollars for the rears.
300 for both.
Duncan[/QUOTE]
PM SENT!!!
-Have two track days on the left, new bearing in the right (no street time at all)
-Bearings have been repacked with redline hi-temp grease
-Have ARP 3" studs already pressed in.
Also have a set of rears with factory studs
Asking 225 dollars for the fronts.
150 dollars for the rears.
300 for both.
Duncan[/QUOTE]
PM SENT!!!
| KAIBUTSU | 12-11-2008 08:18 PM |
FS: Hoosier A6 295x30 r18s.
All tires have less than 40 runs on them.
8 tires for $650.
Located NY-NJ-CT.
Will ship at buyer's expense.
Tires will fit 08 sti stock rim.
All tires have less than 40 runs on them.
8 tires for $650.
Located NY-NJ-CT.
Will ship at buyer's expense.
Tires will fit 08 sti stock rim.
| Leonardo | 12-12-2008 07:02 PM |
Bump for the above!
| onur | 12-12-2008 07:14 PM |
FT: 16" for your 15" rally wheels (pref. compos) + Tires4Sale
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
FS: GC8 and GD GrpN 12.5:1 Quick Steering Racks
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1175/cat/18[/url]
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
FS: GC8 and GD GrpN 12.5:1 Quick Steering Racks
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1175/cat/18[/url]
| Legacy | 12-12-2008 09:24 PM |
[QUOTE=onur;24811786]FT: 16" for your 15" rally wheels (pref. compos) + Tires4Sale
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
FS: GC8 and GD GrpN 12.5:1 Quick Steering Racks
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1175/cat/18[/url][/QUOTE]
What's the widest rubber you could run on those 16's ?
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
FS: GC8 and GD GrpN 12.5:1 Quick Steering Racks
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1175/cat/18[/url][/QUOTE]
What's the widest rubber you could run on those 16's ?
| Greg555 | 12-13-2008 10:02 AM |
[QUOTE=Legacy;24813114]What's the widest rubber you could run on those 16's ?[/QUOTE]
Nothing you can buy in tirerack
GD
Nothing you can buy in tirerack
GD
| Legacy | 12-13-2008 10:08 AM |
So in other words my plans to use these as street wheels is a pipe dream :diaf: They look cool enough.
| Greg555 | 12-13-2008 10:22 AM |
these wheels are strictly designed for the snow/ice rally tires which are as wide as your spare tires
Greg
Greg
| onur | 12-13-2008 02:10 PM |
I guess that answers your question. I uploaded some photos and added some tires for sale (check the below link):
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
[QUOTE=Greg555;24816830]these wheels are strictly designed for the snow/ice rally tires which are as wide as your spare tires
Greg[/QUOTE]
[url]http://www.specialstage.com/classifieds/showproduct.php/product/1176/cat/18[/url]
[QUOTE=Greg555;24816830]these wheels are strictly designed for the snow/ice rally tires which are as wide as your spare tires
Greg[/QUOTE]
| jbsurf1 | 12-13-2008 03:23 PM |
So Cal, San Diego, Ca Brand new 4 each Kumho ECSTA V710 275/40Z/R17 tires never mounted. Tires have been heat cycled by tire rack. $1100.00 firm would prefer local pickup. PM for pictures and any question.
Thanks
Jesse
Thanks
Jesse
| chawn001 | 12-15-2008 03:05 PM |
Newbie looking for 2.5 motor
�
�
Since I have to post 3 replies I can't post in the wanted section. I have a Sand Limo "Sand Rail" and am looking for a 2.5 turbo or non turbo motor for sale.
| pzary3233 | 12-15-2008 03:09 PM |
WTB 15" RALLY WHEELS!
I have some soft compound tires I need to mount up for next season of Rally X!!!
I have some soft compound tires I need to mount up for next season of Rally X!!!
| dunk | 12-16-2008 12:00 PM |
Quantum Motorsports brake ducts for an 02-07 WRX or 04 STI. 40 dollars shipped. This is 1/2 off what you'd pay new.
thanks,
Duncan
thanks,
Duncan
| pzary3233 | 12-16-2008 12:08 PM |
Pm Sent! Want Them!
| eclip5e | 12-16-2008 12:33 PM |
[QUOTE=dunk;24851860]Quantum Motorsports brake ducts for an 02-07 WRX or 04 STI. 40 dollars shipped. This is 1/2 off what you'd pay new.
thanks,
Duncan[/QUOTE]
pics?
thanks,
Duncan[/QUOTE]
pics?
| eclip5e | 12-16-2008 12:38 PM |
[B]Cusco Zero 2e Coilovers.[/B]
These are the coilovers with the "E-Con" EDFC (Electronic Damping Force Controller) that sits on your dashboard to adjust the suspension valves from your drivers seat. These are the top-of-the-line EDFC coilovers on the market right now.
These coilovers are 4-way adjustable, and importantly, the spring pre-load and ride height adjustments are independant.
[B]Adjustability factors:[/B]
* Spring pre-load
* Ride Height
* Shock Valving (Stiffness/Rebound)
* Camber
[B]Fitment:[/B]
* WRX (GDA: 2002-2007)
* WRX STI (GDB/a, GDB/b, GDB/c, GDB/d: 2004, Early 2005) (Not cars with 5x114.3 PCD fitment)
[size=5]Details[/size]
[B]Milage:[/B] 7800 miles
[B]Condition:[/B] Used, Very good
[COLOR="Red"][size=5][B]Price:[/B] $1200[/size][/COLOR]
[B]Payment: [/B] PayPal or Cash
[B]Shipping Method:[/B] UPS
[B]International Shipping:[/B] Yes
[IMG]http://www.visual-assault.org/ssd_admin/albums/album-46/lg/2765.jpg[/IMG]
This is the complete kit.
Originally bought new from Gruppe-S at MSRP of $2350. I'm upgrading to 3-way adjustables with remote resovoirs.
I've run these since 2005 on my track car, the RASpec Impreza. It's a track-only car, so it only has 7k street miles on them with maybe 800 track miles on them. Most importantly, these [B]have never been driven between the months of November and March[/B]. They have [B]NEVER seen a New England Winter[/B].
Original thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1634698[/url]
These are the coilovers with the "E-Con" EDFC (Electronic Damping Force Controller) that sits on your dashboard to adjust the suspension valves from your drivers seat. These are the top-of-the-line EDFC coilovers on the market right now.
These coilovers are 4-way adjustable, and importantly, the spring pre-load and ride height adjustments are independant.
[B]Adjustability factors:[/B]
* Spring pre-load
* Ride Height
* Shock Valving (Stiffness/Rebound)
* Camber
[B]Fitment:[/B]
* WRX (GDA: 2002-2007)
* WRX STI (GDB/a, GDB/b, GDB/c, GDB/d: 2004, Early 2005) (Not cars with 5x114.3 PCD fitment)
[size=5]Details[/size]
[B]Milage:[/B] 7800 miles
[B]Condition:[/B] Used, Very good
[COLOR="Red"][size=5][B]Price:[/B] $1200[/size][/COLOR]
[B]Payment: [/B] PayPal or Cash
[B]Shipping Method:[/B] UPS
[B]International Shipping:[/B] Yes
[IMG]http://www.visual-assault.org/ssd_admin/albums/album-46/lg/2765.jpg[/IMG]
This is the complete kit.
Originally bought new from Gruppe-S at MSRP of $2350. I'm upgrading to 3-way adjustables with remote resovoirs.
I've run these since 2005 on my track car, the RASpec Impreza. It's a track-only car, so it only has 7k street miles on them with maybe 800 track miles on them. Most importantly, these [B]have never been driven between the months of November and March[/B]. They have [B]NEVER seen a New England Winter[/B].
Original thread:
[url]http://forums.nasioc.com/forums/showthread.php?t=1634698[/url]
| dunk | 12-16-2008 12:41 PM |
[QUOTE=eclip5e;24852357]pics?[/QUOTE]
I'll try and post some up tonight.
Duncan
I'll try and post some up tonight.
Duncan
| Greg555 | 12-16-2008 12:42 PM |
[QUOTE=eclip5e;24852357]pics?[/QUOTE]
Why you need pics if pzary3233 said he wants them?
Why you need pics if pzary3233 said he wants them?
| eclip5e | 12-16-2008 12:46 PM |
[QUOTE=Greg555;24852503]Why you need pics if pzary3233 said he wants them?[/QUOTE]
Because i dont believe in the "dibs" system, personal experience on NASIOC since 2002 has taught me that it fails more often than works.
Because i dont believe in the "dibs" system, personal experience on NASIOC since 2002 has taught me that it fails more often than works.
| RB5 Clone | 12-16-2008 03:33 PM |
FS: DC Pro Spec ShoeZ
�
�
DC Pro Spec 1.0 drivin shoeZ, FIA/SFI approved nomex lined, fit men's size 8.5, blue, new in box w/groovy travel bag. $75
shoez located Maine, you ship/PU
thanks for intrest!
Merry Xmas to your toeZ,
Dave G
shoez located Maine, you ship/PU
thanks for intrest!
Merry Xmas to your toeZ,
Dave G
| Greg555 | 12-16-2008 03:38 PM |
Nevermind Dave.
I need a different size
I need a different size
| dunk | 12-16-2008 06:03 PM |
Picture of the brake ducts.
[img]http://www.ellisfamilyalbum.com/Car%20Stuff/For%20Sale/slides/brake%20ducts.jpg[/img]
Duncan
[img]http://www.ellisfamilyalbum.com/Car%20Stuff/For%20Sale/slides/brake%20ducts.jpg[/img]
Duncan
| Butt Dyno | 12-16-2008 11:40 PM |
8" 2.5" ID springs:
2 x Eibach ERS 400 lb/in $75 (approx 5k miles)
2 x Eibach ERS 450 lb/in $75 (approx 5k miles)
2 x Hyperco OBD 500 lb/in $100 (practically new)
Cusco front camber plates - brand new - $150
2 x Eibach ERS 400 lb/in $75 (approx 5k miles)
2 x Eibach ERS 450 lb/in $75 (approx 5k miles)
2 x Hyperco OBD 500 lb/in $100 (practically new)
Cusco front camber plates - brand new - $150
| mav1c | 12-17-2008 07:30 AM |
[QUOTE=dunk;24851860]Quantum Motorsports brake ducts for an 02-07 WRX or 04 STI. 40 dollars shipped. This is 1/2 off what you'd pay new.
thanks,
Duncan[/QUOTE]
Do these mount differently than the RCE ducts? I'll probably take them.
thanks,
Duncan[/QUOTE]
Do these mount differently than the RCE ducts? I'll probably take them.
| dunk | 12-17-2008 07:55 AM |
[QUOTE=mav1c;24863644]Do these mount differently than the RCE ducts? I'll probably take them.[/QUOTE]
They mount on top of the spindle instead of the bottom. You'd need to get the 05STI version like I have. I think they're nicer in some ways than the RCE ducts. They include built in tie rod heat shields. Plus, at only 75 dollars without the hose, they're a heck of a deal.
Here's a picture that shows a little of the how the duct mounts.
[img]http://ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/Winter%202008%20Projects/Dec%2013/slides/Winter%20Project%20004.jpg[/img]
Duncan
They mount on top of the spindle instead of the bottom. You'd need to get the 05STI version like I have. I think they're nicer in some ways than the RCE ducts. They include built in tie rod heat shields. Plus, at only 75 dollars without the hose, they're a heck of a deal.
Here's a picture that shows a little of the how the duct mounts.
[img]http://ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/Winter%202008%20Projects/Dec%2013/slides/Winter%20Project%20004.jpg[/img]
Duncan
| mav1c | 12-17-2008 08:11 AM |
[QUOTE=dunk;24863715]They mount on top of the spindle instead of the bottom. You'd need to get the 05STI version like I have. I think they're nicer in some ways than the RCE ducts. They include built in tie rod heat shields. Plus, at only 75 dollars without the hose, they're a heck of a deal.
Here's a picture that shows a little of the how the duct mounts.
[img]http://ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/Winter%202008%20Projects/Dec%2013/slides/Winter%20Project%20004.jpg[/img]
Duncan[/QUOTE]
Oh, so the ones you're selling don't work with the '06 STI spindle? I guess that's why you're selling. :)
I want to do something similar to your brake duct routing, so I think these would work better for routing the hose.
Here's a picture that shows a little of the how the duct mounts.
[img]http://ellisfamilyalbum.com/Car%20Stuff/My%20Subaru%20Impreza%20Project/Winter%202008%20Projects/Dec%2013/slides/Winter%20Project%20004.jpg[/img]
Duncan[/QUOTE]
Oh, so the ones you're selling don't work with the '06 STI spindle? I guess that's why you're selling. :)
I want to do something similar to your brake duct routing, so I think these would work better for routing the hose.
| RB5 Clone | 12-17-2008 05:20 PM |
[QUOTE=RB5 Clone;24855053]DC Pro Spec 1.0 drivin shoeZ, FIA/SFI approved nomex lined, fit men's size 8.5, blue, new in box w/groovy travel bag. $75
shoez located Maine, you ship/PU
thanks for intrest!
Merry Xmas to your toeZ,
Dave G[/QUOTE]
snow evening bumperoonie, ttyl guys, time to go make the dOnutZ! :devil:
shoez located Maine, you ship/PU
thanks for intrest!
Merry Xmas to your toeZ,
Dave G[/QUOTE]
snow evening bumperoonie, ttyl guys, time to go make the dOnutZ! :devil:
| kevinfschultz | 12-18-2008 08:22 PM |
springs
�
�
buttdyno,
just ordered a set of KW V3's do you happen to know what the dia of the KW spring is?
what you have is about the right rates for the 03 STX.
Thanks,
just ordered a set of KW V3's do you happen to know what the dia of the KW spring is?
what you have is about the right rates for the 03 STX.
Thanks,
| Whiteghost 2.5 | 12-21-2008 08:35 PM |
[QUOTE=Whiteghost 2.5;22662567]I have a Subaru GD body Chassis that was being prepped for Speed World Challenge competition, I got it with the intent of building a Time Attack racer out of it. The Chassis has been professionally caged. Chassis comes with F&R crossmembers, control arms (forged), rear lateral links, 5x100 hubs with front ball joint extenders and extended arp wheel studs, front bumper 04-05 or 06, rear trunk, 4 doors gutted and clearanced for cage, dash, steering column, Fuse panel, switch panel with brake bias knob.
$3500 + shipping
Just back from sandblasting and sealer priming
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis047.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis050.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis049.jpg[/IMG]
Painted Satin Black
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3099.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
05 sti steering rack $200 + shipping
05 sti crossmember $100 + shipping
Hotchkis Competition sway bars ( bars only) $300 + shipping
Add 3% for paypal.
email me with all questions.
Thanks
Josh[/QUOTE]
Bump up for price drop
$3500 + shipping
Just back from sandblasting and sealer priming
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis044.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis045.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis047.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis050.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/Chassis049.jpg[/IMG]
Painted Satin Black
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3099.jpg[/IMG]
[IMG]http://i12.photobucket.com/albums/a212/Whiteghost25/IMG_3097.jpg[/IMG]
05 sti steering rack $200 + shipping
05 sti crossmember $100 + shipping
Hotchkis Competition sway bars ( bars only) $300 + shipping
Add 3% for paypal.
email me with all questions.
Thanks
Josh[/QUOTE]
Bump up for price drop
| mav1c | 12-23-2008 11:36 AM |
[b]Autopower rollbar[/b] - With harness bar and diagonal bar - Fits '02 -'07 GD Subaru Impreza (all versions) - $325
[b]Sparco Evo Seats[/b] - Dated 2006 - One with mounts and slider. One with just mounts. I'd also throw in custom Piper Motrsports bases for some extra $$$. $1100 without bases - $1250 with bases.
[b]G-Force Pro 6-pt quick release harnesses - [/b]Both are dated 2006 so they wouldn't be legal for most racing series, but they are in excellent condition and work great for a track car. The passenger harness has significantly less use. $80 driver, $90 Passenger, $160 for both.
[b]The rollbar, seats, and harnesses would make a perfect package for a GD Impreza track car.[/b]
I'll try to get pics up ASAP.
I'd also be interested in possible trades for wheels. 17x8.5, 17x9, or 18x8.5. Offset in the +45 to +48 range.
Also selling a whole bunch of part out items from my 2006 STI. See full list here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1655218[/url]
[b]Sparco Evo Seats[/b] - Dated 2006 - One with mounts and slider. One with just mounts. I'd also throw in custom Piper Motrsports bases for some extra $$$. $1100 without bases - $1250 with bases.
[b]G-Force Pro 6-pt quick release harnesses - [/b]Both are dated 2006 so they wouldn't be legal for most racing series, but they are in excellent condition and work great for a track car. The passenger harness has significantly less use. $80 driver, $90 Passenger, $160 for both.
[b]The rollbar, seats, and harnesses would make a perfect package for a GD Impreza track car.[/b]
I'll try to get pics up ASAP.
I'd also be interested in possible trades for wheels. 17x8.5, 17x9, or 18x8.5. Offset in the +45 to +48 range.
Also selling a whole bunch of part out items from my 2006 STI. See full list here:
[url]http://forums.nasioc.com/forums/showthread.php?t=1655218[/url]
Không có nhận xét nào:
Đăng nhận xét