| wrxxed | 01-28-2006 06:18 PM |
JDM sidemarker sealed?
�
�
:confused: Anyone know how long the bulbs will last,since you cant change them? thanks. :eek:
| ej20love | 01-28-2006 06:29 PM |
yeah, I want to know too!
| Sokudo | 01-28-2006 06:32 PM |
which jdm marker are we talking about here ? the oval repeaters or the the one beside the headlights ?
| Subie Gal | 01-28-2006 06:43 PM |
likely the ovals... as those are sealed.
| FAST4 | 01-28-2006 08:51 PM |
I know clear ones are sealed and ambers are not
| wrxxed | 01-28-2006 09:52 PM |
There is only 1 "side marker" the one just behind the headlight is a corner marker! I have the clear ones with an amber bulb and they are unfortunately sealed. I guess they are built to last forever! Damn Subaru.
| Tkacik | 01-28-2006 09:57 PM |
Are they LED's? If they are, they might just outlast you...
| enewtabie | 01-29-2006 12:48 AM |
I hope they last forever..lol
| piker28 | 01-29-2006 01:51 AM |
no im doubting they last forever just a bulb, i mean least my edm ones cost like nothing and easily replaced so i dont worry about when they blow out...im sure they have normal bulb lifes which is years
| NoCalSubie | 01-29-2006 02:29 AM |
Should last you a good 3+ years. If you want it to last longer just signal less.
| wrxxed | 01-29-2006 04:44 PM |
Thats the plan ,no more signaling! Mabey Ill get a ticket but Ill save $30!!
| CreoWRX | 01-29-2006 04:55 PM |
[QUOTE=FAST4]I know clear ones are sealed and ambers are not[/QUOTE]
Yep, the ambers are defnitely not sealed. The SAA ones (Urban Grey) are not sealed either, and you can replace the bulbs;
[img]http://www.mcnproductions.com/sti/exterior/sti4.jpg[/img]
-Mike-
Yep, the ambers are defnitely not sealed. The SAA ones (Urban Grey) are not sealed either, and you can replace the bulbs;
[img]http://www.mcnproductions.com/sti/exterior/sti4.jpg[/img]
-Mike-
| yaggi | 01-29-2006 09:03 PM |
hey creowrx....where did you get the sidemarker and how much was it? looks great!!
| wrxxed | 01-30-2006 03:10 PM |
ditto
| CreoWRX | 01-30-2006 03:58 PM |
I purchased mine from JapanParts.com. They're ~$53+shipping, and can be had in a variety of colors.
[img]http://www.japanparts.com/Pic/pic078/015-002.jpg[/img]
I'm planning to sell my set soon, as I can't use them on my Legacy.
-Mike-
[img]http://www.japanparts.com/Pic/pic078/015-002.jpg[/img]
I'm planning to sell my set soon, as I can't use them on my Legacy.
-Mike-
| ninethreeeleven | 01-30-2006 07:03 PM |
But won't that leave a hole in the side?
| CreoWRX | 01-30-2006 07:09 PM |
[QUOTE=ninethreeeleven]But won't that leave a hole in the side?[/QUOTE]
Look at the vehicles under my username... I don't have the STi anymore. ;)
I found a really cheap (i.e. used) set of amber side markers and put them in the fenders before I traded the car in.
[img]http://www.mcnproductions.com/sti/exterior/sti27.jpg[/img]
-Mike-
Look at the vehicles under my username... I don't have the STi anymore. ;)
I found a really cheap (i.e. used) set of amber side markers and put them in the fenders before I traded the car in.
[img]http://www.mcnproductions.com/sti/exterior/sti27.jpg[/img]
-Mike-
| TygerStile | 01-31-2006 12:02 AM |
^^ Dang Mike, I guess you're going through the whole Subaru family:lol: .
| CreoWRX | 01-31-2006 12:08 AM |
[QUOTE=TygerStile]^^ Dang Mike, I guess you're going through the whole Subaru family:lol: .[/QUOTE]
haha Well, no Tribeca or Baja for me... ;)
-Mike-
haha Well, no Tribeca or Baja for me... ;)
-Mike-
| DimSum22 | 01-31-2006 03:31 PM |
[IMG]http://i41.photobucket.com/albums/e283/DavidU86/sidemarker.jpg[/IMG]
| darioc | 01-31-2006 10:04 PM |
who wants to install the ones ive had for 15 months on my car for me?
| DimSum22 | 01-31-2006 10:30 PM |
[QUOTE=darioc]who wants to install the ones ive had for 15 months on my car for me?[/QUOTE]
I would, but you're far away.
I would, but you're far away.
| darioc | 01-31-2006 11:20 PM |
with all the regulations now, its very safe to fly out here!
| Handsdown | 01-31-2006 11:56 PM |
it's really not hard at all. i did my passenger side one, someone from subaru who heard i needed a dremel from this board did my driver's first.
| jcdrenguis | 02-03-2006 02:37 AM |
I also agree that the amber ones aren't sealed:
[IMG]http://www.jcdrenguis.com/nasioc/side_repeater.jpg[/IMG]
[IMG]http://www.jcdrenguis.com/nasioc/side_repeater.jpg[/IMG]
| Jpapania | 02-03-2006 06:14 AM |
I know it would not be correct for my model (the JDM 04 - 05s have the clear), but I always thought the amber would look better on a WRB car. Just scared sh**less to mess up cutting the whole in my fender. Then there is tearing down my headlights to remove the stupid reflector (I would like to leave the amber triangle up front.
Anyone have some brass balls I can borrow for a weekend :lol:
Anyone have some brass balls I can borrow for a weekend :lol:
| BIGSKYWRX | 02-03-2006 07:34 PM |
Don't know what US suby had these oem, but Subaru carries the clear ones- part # 84401SA000- pretty reasonable too :)
| enewtabie | 02-03-2006 07:47 PM |
I love the sidemarkers..One of my fav mods..pretty bright too.
| 99subi | 02-03-2006 07:50 PM |
i wanna do them but i waaaay to scared to mess the fender up
| enewtabie | 02-03-2006 07:51 PM |
[QUOTE=99subi]i wanna do them but i waaaay to scared to mess the fender up[/QUOTE]
go for it..just use a template
go for it..just use a template
| ninethreeeleven | 02-03-2006 09:02 PM |
[QUOTE=99subi]i wanna do them but i waaaay to scared to mess the fender up[/QUOTE]
Tell me where to get some Ambers for cheap, and come up to Albany and we can do it in my driveway.
I have a Dremel, a couple of nice cordless drills, and a frickin hand held saw. I also have a good selection of guns that, if the drills don't work, we can just shoot holes in the sides.
I am a good enough shot, but were going to have to test it on your car first.
Tell me where to get some Ambers for cheap, and come up to Albany and we can do it in my driveway.
I have a Dremel, a couple of nice cordless drills, and a frickin hand held saw. I also have a good selection of guns that, if the drills don't work, we can just shoot holes in the sides.
I am a good enough shot, but were going to have to test it on your car first.
| TygerStile | 02-03-2006 10:23 PM |
[QUOTE=enewtabie]go for it..just use a template[/QUOTE]
What he said. You just have to dive in, and use a good template so that you won't mess up. Over all it wasn't a hard install. Just take your time and things should go smoothly.
What he said. You just have to dive in, and use a good template so that you won't mess up. Over all it wasn't a hard install. Just take your time and things should go smoothly.
| Jpapania | 02-03-2006 11:30 PM |
I think [url]www.subydude.com[/url] has the amber ones, but not idea if it is a good price or not.
[url]http://subydude.com/osc/index.php/cPath/220_90_149?osCsid=96c262ce92aaab398d188fbb8bb85285[/url]
$65.00
Oh word of caution to the wagon owners, they mount in a slighlty different spot than where they do on the sedans. So about boring those brass balls :lol:
[url]http://subydude.com/osc/index.php/cPath/220_90_149?osCsid=96c262ce92aaab398d188fbb8bb85285[/url]
$65.00
Oh word of caution to the wagon owners, they mount in a slighlty different spot than where they do on the sedans. So about boring those brass balls :lol:
| BIGSKYWRX | 02-04-2006 10:39 AM |
^ there's a good wagon template floating around :)
| Jpapania | 02-04-2006 02:38 PM |
[QUOTE=BIGSKYWRX]^ there's a good wagon template floating around :)[/QUOTE]
Let me know if you stumble across it again. The only one I have seen is a sedan one and then somebody just eyeballed where they should be based on a picture of a JDM wagon. They looked pretty good, but if there is an actual template I would love to have it.
Let me know if you stumble across it again. The only one I have seen is a sedan one and then somebody just eyeballed where they should be based on a picture of a JDM wagon. They looked pretty good, but if there is an actual template I would love to have it.
| pityr | 02-04-2006 02:45 PM |
[QUOTE=Jpapania]I know it would not be correct for my model (the JDM 04 - 05s have the clear), but I always thought the amber would look better on a WRB car. Just scared sh**less to mess up cutting the whole in my fender. Then there is tearing down my headlights to remove the stupid reflector (I would like to leave the amber triangle up front.
Anyone have some brass balls I can borrow for a weekend :lol:[/QUOTE]
Ive got balls but I dont think my GF would like it if I loaned em out. :p
[img]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMzg3MDQ2NnM0MTNkZmQzMXk1NDE%3D.jpg[/img]
Anyone have some brass balls I can borrow for a weekend :lol:[/QUOTE]
Ive got balls but I dont think my GF would like it if I loaned em out. :p
[img]http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMzg3MDQ2NnM0MTNkZmQzMXk1NDE%3D.jpg[/img]
| BIGSKYWRX | 02-04-2006 05:21 PM |
wagon templates
[url]http://forums.nasioc.com/forums/showpost.php?p=4263717&postcount=10[/url]
[url]http://forums.nasioc.com/forums/showpost.php?p=4263717&postcount=10[/url]
Không có nhận xét nào:
Đăng nhận xét