| jetguy | 06-09-2002 05:12 PM |
Bling Bling interior
1 Attachment(s)
Heres my interior so far,
painted MOMO wheel w/ leather paint
MOMO airleather shifter
MOMO seatbelt pads
Blitz DSBC-ID
Brushed aluminum dash kit
I would like to add
katskinz leather kit black with perferated center sections
MOMO pitstop e-brake handel (black and aluminum)
autometer gauge pod (when they finaly come out with it:mad: )
in the gauge pod i would like to put an EGT and air/fuel meter.
painted MOMO wheel w/ leather paint
MOMO airleather shifter
MOMO seatbelt pads
Blitz DSBC-ID
Brushed aluminum dash kit
I would like to add
katskinz leather kit black with perferated center sections
MOMO pitstop e-brake handel (black and aluminum)
autometer gauge pod (when they finaly come out with it:mad: )
in the gauge pod i would like to put an EGT and air/fuel meter.
| dubrx | 06-09-2002 05:17 PM |
Nice interior jetguy. Where did you get your shift knob from and how much? I know there is another thread here about the momo shift knob, but I was just wondering if you had another source. Thanks.
| jetguy | 06-09-2002 05:26 PM |
Thanks, I got the knob from [url]www.sportscar-parts.com[/url]
I think i paid $64.00 for it a few months ago but i just checked there site and i think they are asking $94.00 for it:rolleyes:
I think i paid $64.00 for it a few months ago but i just checked there site and i think they are asking $94.00 for it:rolleyes:
| The_Triton | 06-09-2002 05:35 PM |
Looks Great!!! I have 2 questions for you. How was the install of the trim???? I'm debating getting some but don't know how involved it is..... Q2, Can you post some close up pics of the steering wheel. I would like to see the detail in that. Great idea, would like to maybe try that myself.
Props,
Triton
Props,
Triton
| jetguy | 06-09-2002 06:59 PM |
trim wasn't that bad aT all to install.
the stearing wheel: get paint from sherwin williams automotive. it is in a spray can and is made for vinal and plastic. it stays simi-flexable. I used black electrical tape to tape area off, sprayed paint in a plastic cup, then I brushed it on useing a pencil sized piant brush. after i had it all painted up i let it dry for 24hrs, then take fine steel wool and rub over the area to give it a brushed aluminum look. take your timt and pay attention to details!!:D
the stearing wheel: get paint from sherwin williams automotive. it is in a spray can and is made for vinal and plastic. it stays simi-flexable. I used black electrical tape to tape area off, sprayed paint in a plastic cup, then I brushed it on useing a pencil sized piant brush. after i had it all painted up i let it dry for 24hrs, then take fine steel wool and rub over the area to give it a brushed aluminum look. take your timt and pay attention to details!!:D
| Frederf | 06-09-2002 07:05 PM |
Lesson learned: You want to look over the steering wheel, not be blinded by it.
| IgotWRXed | 06-09-2002 07:08 PM |
hey a pontiac vibe!:D
| Hazdaz | 06-09-2002 07:21 PM |
Oh, no!....
I painted my steering wheel atleast 3 months ago silver and matched the silver trim perfectly... i REALLY hope I don;t start seeing EVERYONE copying me now :D
I painted my steering wheel atleast 3 months ago silver and matched the silver trim perfectly... i REALLY hope I don;t start seeing EVERYONE copying me now :D
| clarkma5 | 06-09-2002 09:59 PM |
*spray paints rest of car silver to match*
| jetguy | 06-09-2002 10:16 PM |
hazdaz,
I painted mine 5 months ago, SO you copied me!!
OR we are just both automotive geniuses
I painted mine 5 months ago, SO you copied me!!
OR we are just both automotive geniuses
| Hazdaz | 06-09-2002 10:25 PM |
Yeah, but I posted my original pix 3 months ago - so there :D
[url]http://forums.nasioc.com/forums/showthread.php?s=&threadid=157218&highlight=steering+wheel+paint[/url]
Either way, it lookx good dude.... Personally I tink its my favorite or second favorite mod that i've done to my car so far.
Also, luckily your car isn't silver too, cuz then I might get REALY snotty with ya :lol: (I just HATE seeing other Siilver WRXs... them damn things are everywhere :lol: )
[url]http://forums.nasioc.com/forums/showthread.php?s=&threadid=157218&highlight=steering+wheel+paint[/url]
Either way, it lookx good dude.... Personally I tink its my favorite or second favorite mod that i've done to my car so far.
Also, luckily your car isn't silver too, cuz then I might get REALY snotty with ya :lol: (I just HATE seeing other Siilver WRXs... them damn things are everywhere :lol: )
| jetguy | 06-11-2002 09:02 PM |
hazdaz,
where in CT?
I lived in monroe for 18 years.
where in CT?
I lived in monroe for 18 years.
| Hazdaz | 06-11-2002 09:14 PM |
You used to live in CT? Oh... sorry to hear that - you have my condolances ..... if ya haven't figured it out, I think CT sux.
Im in West Hartford. Monroes like out in the boonies, right?
Im in West Hartford. Monroes like out in the boonies, right?
| CodyGTS | 06-12-2002 09:52 AM |
hey, i remember that interior...it was fun getting thrown around in it while going way too fast through a little parking lot and side roads :). and for those wondering, the paint looks real good in person, it looks pretty much stock. i think i might try that to mine too but with blue instead (once i get the car).
| jetguy | 06-12-2002 10:19 AM |
Hazdas,
yeah monroe is a small town, but i have fond memories of it. It was my high school years (football and cheerleaders:D ).
monroe is near fairfeild, trumbel, danbury, and bridgeport.
basicly a little suberb. great twisty roads (that I know like the back of my hand, one road had a huge bump in it that i would jump my fathers honda accord over:devil: I would hit it near the top of third gear. one time I jumped so far I had time to look over to my buddie and say "man that one sucked" BOOOM then we landed.:D The next day we toteled the honda and took out a phone pole:( .
Cody, I think blue would look good, you did a great job on your gts's interior!! I gues all of those art classes are paying off (AIOA)
yeah monroe is a small town, but i have fond memories of it. It was my high school years (football and cheerleaders:D ).
monroe is near fairfeild, trumbel, danbury, and bridgeport.
basicly a little suberb. great twisty roads (that I know like the back of my hand, one road had a huge bump in it that i would jump my fathers honda accord over:devil: I would hit it near the top of third gear. one time I jumped so far I had time to look over to my buddie and say "man that one sucked" BOOOM then we landed.:D The next day we toteled the honda and took out a phone pole:( .
Cody, I think blue would look good, you did a great job on your gts's interior!! I gues all of those art classes are paying off (AIOA)
| CodyGTS | 06-12-2002 10:23 AM |
hey, thanks chris, i was happy with the way everything came out on the celica too. its just too bad it doesn't run as good as it looks. i've got some good plans in mind for the wrx though, all i need is a better job and some more money. which reminds me, i still need to go do some job searching next week. that should be fun...
| secured-nor1 | 06-12-2002 11:48 AM |
......
| metoo | 06-12-2002 11:52 AM |
[QUOTE][i]Originally posted by jetguy [/i]
[B]Thanks, I got the knob from [url]www.sportscar-parts.com[/url]
I think i paid $64.00 for it a few months ago but i just checked there site and i think they are asking $94.00 for it:rolleyes: [/B][/QUOTE]
I bought a replica knob like that one on ebay for $25. The only differences is the lack of "MOMO" on it and mine has no holes in the leather. I've had it for the last 15,000 miles.
[B]Thanks, I got the knob from [url]www.sportscar-parts.com[/url]
I think i paid $64.00 for it a few months ago but i just checked there site and i think they are asking $94.00 for it:rolleyes: [/B][/QUOTE]
I bought a replica knob like that one on ebay for $25. The only differences is the lack of "MOMO" on it and mine has no holes in the leather. I've had it for the last 15,000 miles.
| 98kPa | 06-12-2002 03:12 PM |
You need these....
[IMG]http://wrx.jasongabler.net//pics/20020406first/preview/0030_console.JPG[/IMG]
jason :D
[IMG]http://wrx.jasongabler.net//pics/20020406first/preview/0030_console.JPG[/IMG]
jason :D
| 6Pack | 06-12-2002 03:46 PM |
What no dead pedal? With a painted wheel, you should at LEAST have a matching dead pedal.
| The_Triton | 06-12-2002 04:27 PM |
Where did you get the trim kit from???? There is a blue carbonfiber one I've seen on Ebay. But I don't know the quality of those.
Another question........I'm thinking of trying some painting as well (don't worry, I don't have a Silver WRX :D ). However, how hard would it be to take the paint off if I didn't like it. Would the steering wheel never look the same????
Another question........I'm thinking of trying some painting as well (don't worry, I don't have a Silver WRX :D ). However, how hard would it be to take the paint off if I didn't like it. Would the steering wheel never look the same????
| sorbee711 | 06-12-2002 04:35 PM |
Interior as a whole looks good, but that steering wheel is what looks REALLY sharp to me. Someone should do those up properly (as in manufacturing them in bulk) and sell them. :)
| Hazdaz | 06-12-2002 04:46 PM |
1 Attachment(s)
You guys mean something like this?
(DIY Dead pedal and Reverse Indiglo guages).
:D
(DIY Dead pedal and Reverse Indiglo guages).
:D
| View Askew | 06-12-2002 04:49 PM |
The steering wheel kind of looks like a variation of the options from the Subaru Japan site.
[url="http://accessory.subaru.co.jp/impreza/catalog/wrx-sti/color.html"]Subaru Japan Accessories[/url]
Put this in there too. :p
[img]http://accessory.subaru.co.jp/impreza/catalog/image/i-068.jpg[/img]
[url="http://accessory.subaru.co.jp/impreza/catalog/wrx-sti/color.html"]Subaru Japan Accessories[/url]
Put this in there too. :p
[img]http://accessory.subaru.co.jp/impreza/catalog/image/i-068.jpg[/img]
| jetguy | 06-12-2002 10:58 PM |
Once you painted the wheel I think you are commited. You could try to remove the paint but; it would never come all the way out of the grains in the leather , plus what ever solvent you would use would kill the leather. So if you are going to try this be confident in your ability with brush control. This was not exactly the easiest mod. but it looks great when it is done rite.
the dash kit is from [url]www.exoticwooddash.com[/url] it is the brushed aluminum 3-decor kit. I think it went for $225.00 . There is a cheaper kit but it dosen't look as good ($185.00) They do sell a metal weave looking kit that looks awsome but I think it is $300.00+++:eek:
Don't worry about "copying" any one this is a cool mod. I honestly came up with this idea by looking in the back of a magazine [url]www.stwheel.com[/url] had some for sale like this and I thought "I could do that myself", so I did!
Hazdas the white gauges look great. Dose anyone know if they make silver gauges??
Those leather seats look sweeet:cool: but I'm still saving up for my scooby sports downpipe
the dash kit is from [url]www.exoticwooddash.com[/url] it is the brushed aluminum 3-decor kit. I think it went for $225.00 . There is a cheaper kit but it dosen't look as good ($185.00) They do sell a metal weave looking kit that looks awsome but I think it is $300.00+++:eek:
Don't worry about "copying" any one this is a cool mod. I honestly came up with this idea by looking in the back of a magazine [url]www.stwheel.com[/url] had some for sale like this and I thought "I could do that myself", so I did!
Hazdas the white gauges look great. Dose anyone know if they make silver gauges??
Those leather seats look sweeet:cool: but I'm still saving up for my scooby sports downpipe
| HellWagon | 06-17-2002 11:41 PM |
Looks somewhat familar...
[IMG]http://home.attbi.com/~hellwagon/pics/interior.jpg[/IMG]
[IMG]http://home.attbi.com/~hellwagon/pics/interior.jpg[/IMG]
| jetguy | 06-21-2002 01:23 PM |
1 Attachment(s)
:D update:....... I just fabricated my own dead pedal
I used 2024 t-6 aircraft aluminum .100 thick. and i matched the oem pedals hole patern. i also inserted some rubber grommets as a anti slip measure (and it looks cool).
I used 2024 t-6 aircraft aluminum .100 thick. and i matched the oem pedals hole patern. i also inserted some rubber grommets as a anti slip measure (and it looks cool).
| wrxlvr | 06-21-2002 01:29 PM |
:eek: That's the best looking dead pedal I've seen yet. Great job man. Wanna make me one??
| jetguy | 06-21-2002 01:39 PM |
thanks for the compliment.
sorry I won't be able to make any more. (boss is getting p!$$ed at my g-jobs):mad:
sorry I won't be able to make any more. (boss is getting p!$$ed at my g-jobs):mad:
| krave | 06-21-2002 02:00 PM |
i like your blitz boost controller display mount :)
| caut10n | 06-22-2002 07:47 AM |
Cool. Any ideas for the clock spot?
Hey. Any ideas on what you might try to put where the digital clock is now?
Are you going to leave that in?
I'm seriously going for performance mods first, but I really hate that clock. I'm doing the gagues on the pillar so I'm looking for ideas as to what might fit there and be cool/functional.
Any links on that topic?
(figured you might have an idea since you did all that work so far)
Caut10n
Are you going to leave that in?
I'm seriously going for performance mods first, but I really hate that clock. I'm doing the gagues on the pillar so I'm looking for ideas as to what might fit there and be cool/functional.
Any links on that topic?
(figured you might have an idea since you did all that work so far)
Caut10n
| YodaPez | 06-24-2002 12:21 AM |
jetguy and Hazdaz - only one question:
How bright is it in the sun? The mod really makes the interior look great, but if you're squinting from the glare off it, it might make the whole task of driving a little rough... :cool:
How bright is it in the sun? The mod really makes the interior look great, but if you're squinting from the glare off it, it might make the whole task of driving a little rough... :cool:
| jetguy | 06-24-2002 10:19 AM |
not glaring at all. this will not be a problem. it is about as shinny as the silver around the stereo. I get more glare off of my black dash with 2001 protectant on it that i do with the silver parts of my wheel.
| 2k2 | 06-24-2002 12:57 PM |
Hellwagon, where did you get your kit that had the piece for the clock?
I might have a Bling Bling Interior Soon.
Got Leather Seats coming...
Custom Floor Mats from autostyle.co.uk
And Possibly a Carbon Fiber Dash Kit....
Possibly a Momo shift knob.
Bryan
I might have a Bling Bling Interior Soon.
Got Leather Seats coming...
Custom Floor Mats from autostyle.co.uk
And Possibly a Carbon Fiber Dash Kit....
Possibly a Momo shift knob.
Bryan
| Shaji | 06-24-2002 07:33 PM |
hey hellwagon or jetguy....
is that the stock shift boot that u guys have? ive got the same MOMO shift knob, and i was wondering how u guys attached the suaru shift boot to that MOMO race airleather shift knob...
thanx guys
is that the stock shift boot that u guys have? ive got the same MOMO shift knob, and i was wondering how u guys attached the suaru shift boot to that MOMO race airleather shift knob...
thanx guys
| HellWagon | 06-27-2002 11:53 PM |
[QUOTE][i]Originally posted by Shaji [/i]
[B]hey hellwagon or jetguy....
is that the stock shift boot that u guys have? ive got the same MOMO shift knob, and i was wondering how u guys attached the suaru shift boot to that MOMO race airleather shift knob...
thanx guys [/B][/QUOTE]
I didn't...
I have a short shifter and it is low enough that the boot kind up bunches up to meet the knob...
[B]hey hellwagon or jetguy....
is that the stock shift boot that u guys have? ive got the same MOMO shift knob, and i was wondering how u guys attached the suaru shift boot to that MOMO race airleather shift knob...
thanx guys [/B][/QUOTE]
I didn't...
I have a short shifter and it is low enough that the boot kind up bunches up to meet the knob...
Không có nhận xét nào:
Đăng nhận xét